Potassium acetate acid formate

Rafaelle Piria (Sevilla, Calabria, 2 August 1815-Turin, 18 July 1865), a pupil of Dumas, was professor of chemistry in Turin. He worked on salicin derivatives and populin (see p. 526), discovered the formation of aliphatic alcohols by the action of nitrous acid on amines, and independently of Lim-pricht (and Ritter) the generalisation of the synthesis of an aldehyde by distilling the calcium salt of the acid with calcium formate, which was discovered by Williamson with potassium acetate and formate. He argued that the molecules of elements are diatomic (O2, etc.). 

Aromatic and aliphatic isocyanates can undergo self polymerization to form stable resinous trimer structures. The reaction is catalyzed by many materials including calcium acetate, potassium acetate, sodium formate, sodium carbonate, sodium methoxide, triethylamine, oxalic acid, sodium benzoate in dimethylformamide, and a large number of soluble metal... 

The formation of ethyl isopropylidene cyanoacetate is an example of the Knoevenagel reaction (see Discussion before Section IV,123). With higher ketones a mixture of ammonium acetate and acetic acid is an effective catalyst the water formed is removed by azeotropic distillation with benzene. The essential step in the reaction with aqueous potassium cyanide is the addition of the cyanide ion to the p-end of the ap-double bond ... 

The metals are impregnated together or separately from soluble species, eg, Na2PdCl4 and HAuCl or acetates (159), and are fixed by drying or precipitation prior to reduction. In some instances sodium or potassium acetate is added as a promoter (160). The reaction of acetic acid, ethylene, and oxygen over these catalysts at ca 180°C and 618—791 kPa (75—100 psig) results in the formation of vinyl acetate with 92—94% selectivity the only other... 

A variety of shale-protective muds are available which contain high levels of potassium ions (10). The reaction of potassium ions with clay, well known to soil scientists, results in potassium fixation and formation of a less water-sensitive clay. Potassium chloride, potassium hydroxide, potassium carbonate [584-08-7] (99), tetrapotassium pyrophosphate [7320-34-5] (100), and possibly the potassium salts of organic acids, such as potassium acetate [127-08-2] (101) and formate, have all been used as the potassium source. Potassium chloride is generally preferred because of its low cost and availabihty. 

Treatment of pyrrole, 1-methyl-, 1-benzyl- and 1-phenyl-pyrrole with one mole of A -bromosuccinimide in THF results in the regiospecific formation of 2-bromopyrroles. Chlorination with IV-chlorosuccinimide is less selective (8UOC2221). Bromination of pyrrole with bromine in acetic acid gives 2,3,4,5-tetrabromopyrrole and iodination with iodine in aqueous potassium iodide yields the corresponding tetraiodo compound. 

Aconitine produces an intense tingling sensation when a drop of a solution, 1 in 10,000, is applied to the tip of the tongue. It also gives a characteristic unstable, crystalline precipitate when a few drops of potassium permanganate solution are added to a solution of the alkaloid in dilute acetic acid. The formation of acetic acid when the alkaloid is heated dry, or of benzoic acid when it is hydrolysed by alkali, have also been suggested as identification tests. For the recognition of minute quantities a biological test is probably the best procedure. ... 

Condensation of p-chlorobenzaldehyde with 3-mercaptopropionic acid in the presence of ammonium carbonate leads to the thiazi-none, 179. The reaction very probably proceeds by the intermediacy of the carbonyl addition product, I7S lactamization completes formation of the observed product. Oxidation of 179 to the sulfone by means of potassium permanganate in acetic acid gives chlormezanone (180), a minor tranquilizer with muscle-relaxant properties. 

After having been washed with 50 cc of water the benzene layer is dried over potassium carbonate, filtered, allowed to stand over 10 g of alumina for about VA hours for partial decolorization, filtered again and concentrated under reduced pressure. The oily base which remains as a residue is directly converted into the tartrate. A solution cooled to 0°C, of 6.50 g of the free base in 100 cc of acetic acid ethyl ester is thoroughly shaken and poured into an ice cold solution of 2.66 g of tartaric acid in 410 cc of acetic acid ethyl ester. The precipitated, analytically pure, tartrate of 3-methylsulfinyl-10-[2 -N-methyl-piperidyl-2")-ethyl-1 ]-phenothiazine melts at 115° to 120°C (foam formation) and sinters above B0°C. The base Is reacted with benzene sulfonic acid in a suitable solvent to give the besylate. 

The structural homology between intermediate 4 and isostrych-nine I (3) is obvious intermediates 3 and 4 are simply allylic isomers and the synthetic problem is now reduced to isomerizing the latter substance into the former. Treatment of 4 with hydrogen bromide in acetic acid at 120°C results in the formation of a mixture of isomeric allylic bromides which is subsequently transformed into isostrychnine I (3) with boiling aqueous sulfuric acid. Following precedent established in 194810 and through the processes outlined in Scheme 8a, isostrychnine I (3) is converted smoothly to strychnine (1) upon treatment with potassium hydroxide in ethanol. Woodward s landmark total synthesis of strychnine (1) is now complete. 

The cobalt complex is usually formed in a hot acetate-acetic acid medium. After the formation of the cobalt colour, hydrochloric acid or nitric acid is added to decompose the complexes of most of the other heavy metals present. Iron, copper, cerium(IV), chromium(III and VI), nickel, vanadyl vanadium, and copper interfere when present in appreciable quantities. Excess of the reagent minimises the interference of iron(II) iron(III) can be removed by diethyl ether extraction from a hydrochloric acid solution. Most of the interferences can be eliminated by treatment with potassium bromate, followed by the addition of an alkali fluoride. Cobalt may also be isolated by dithizone extraction from a basic medium after copper has been removed (if necessary) from acidic solution. An alumina column may also be used to adsorb the cobalt nitroso-R-chelate anion in the presence of perchloric acid, the other elements are eluted with warm 1M nitric acid, and finally the cobalt complex with 1M sulphuric acid, and the absorbance measured at 500 nm. 

Oxidising acetic acid by using chromium (VI) compounds is far less dangerous, if an aqueous potassium dichromate/sulphuric acid mixture is used. On the other hand, if hot evaporation of the medium is carried out and this gives rise to the formation of solid dichromate, the detonation due to the contact of solid salt with acetic acid cannot be avoided. 

Evaporation by heating a filtrate from precipitation of potassium cobaltinitrite caused it to turn purple and explode violently [1]. This was attributed to interaction of nitrite, nitrate, acetic acid and residual cobalt with formation of fulminic or methylnitrolic acids or their cobalt salts, all of which are explosive [2], Mixtures containing nitrates, nitrites and organic materials are potentially dangerous, especially in presence of acidic materials and heavy metals. A later publication confirms the suggestion of formation of nitro- or nitrito-cobaltate(III) [3],... 

Nef prepared acetol in several ways, the more important of which depended upon the reaction between bromoacetone and potassium or sodium formate or acetate, and the subsequent hydrolysis of the ester by methyl alcohol.1 2 Acetol is also formed, together with pyruvic acid, by the direct oxidation of acetone by Baeyer and Villiger s acetone-peroxide reagent.3... 

The reaction of potassium 3-amino-4-oxo-3,4-dihydroquinazoline-2-thiolate 62 with a-bromophenylacetic acid 63 resulted in the formation of (3-amino-4-oxo-3,4-dihydroquinazolin-2-ylsulfanyl)-phenyl-acetic acid methyl ester 64 which on alkali treatment and subsequent acidification resulted in the synthesis of 2-phenyl- 1-thia-4,4a,9-triaza-anthracene-3,10-dione 65 <1999JCR(S)86>. Similarly, the reaction of potassium 3-amino-5,6-dimethyl-4-oxo-3,4,4a,7a-tetrahydrothieno[2,3- pyrimidine-2-thiolate 66 with a-bromo-ester 67 resulted in the formation of 2-(3-amino-5,6-dimethyl-4-oxo-3,4,4a,7a-tetrahydrothieno[2,3- / pyrimidin-2-ylsulfanyl)-propionic acid ethyl ester 68. Subsequent treatment with alkali followed by acidification resulted in the formation of 2,3,7-trimethyl-3a,9a-dihydro-l,8-dithia-4a,5,9-triazacyclopenta[ ]naphthalene-4,6-dione 69 <2000JHC1161>... 

---