Equipment capillary columns

Interest in this method has decreased since advances made in gas chromatography using high-resolution capillary columns (see article 3.3.3.) now enable complete identification by individual chemical component with equipment less expensive than mass spectrometry. 

Time, Cost, and Equipment Analysis time can vary from several minutes for samples containing only a few constituents to more than an hour for more complex samples. Preliminary sample preparation may substantially increase the analysis time. Instrumentation for gas chromatography ranges in price from inexpensive (a few thousand dollars) to expensive (more than 50,000). The more expensive models are equipped for capillary columns and include a variety of injection options and more sophisticated detectors, such as a mass spectrometer. Packed columns typically cost 50- 200, and the cost of a capillary column is typically 200- 1000. 

We have developed the method for quantitative analysis of urinary albumin with CE. A capillary electrophoresis systems Nanophor 01 (Institute of Analytical Instmmentation, Russian Academy of Sciences, Saint-Petersburg) equipped with a UV-detector was used to determine analyte. Separation was achieved using 45 cmx30 p.m I.D. fused silica capillary column with UV-detection at 214 nm. 

Figure 10.4 shows a schematic representation of the multidimensional GC-IRMS System developed by Nitz et al. (27). The performance of this system is demonstrated with an application from the field of flavour analysis. A Siemens SiChromat 2-8 double-oven gas chromatograph equipped with two FIDs, a live-T switching device and two capillary columns was coupled on-line with a triple-collector (masses 44,45 and 46) isotope ratio mass spectrometer via a high efficiency combustion furnace. The column eluate could be directed either to FID3 or to the MS by means of a modified Deans switching system . 

The purity of 1 and 2 is assessed by analytical gas-liquid chromatography (GC) on a Hewlett-Packard 5890 gas chromatograph equipped with a flame-ionization detector and fitted with a 50 m x 0.2 mm HP-5 fused silica glass capillary column using linear temperature programming from an initial temperature of 150°C for 5 min to a final temperature of 200°C for 10 min at a rate of 5°C/min. 

GC analysis indicated that the reaction was complete. Gas chromatographic analyses were performed on a Agilent 6890N GC system equipped with a 30-m 5% polyphenyl methyl siloxane capillary column... 

The gas chromatograph is better to be equipped both with a thermal conductivity detector (TCD) and with a flame ionization detector (FID). The latter is extremely useful in the analysis of organic substances at low concentrations. Packed columns are normally used, although capillary columns offer certain advantages in the analysis of a variety of products. Some of the major companies that supply gas chromatographs are ... 

Ethylene hydrogenation was carried out in a once-through flow reactor. The effluent gas mixture was analyzed with an online gas chromatograph (Hewlett-Packard HP 6890) equipped with an AI2O3 capillary column and a flame ionization detector. Testing conditions included Phydrogen = 200 Torr, Pethyiene = 40 Torr, catalyst mass of 10 to 20 mg and temperature varied from -50 to -25°C. 

HPA catalyzed liquid phase nitration was eairied out in a Teflon-lined stainless autoclave of 200 mL equipped with a magnetic stirrer. Reactants and HPA were quantitatively added to the autoclave, which was sealed and heated in an oil-bath. Products were analyzed by GC with OV-101 30 m capillary column and FID detector by using calibrated area normalization and internal standard method. All products were confirmed by GC-MASS analysis. 

The catalytic reforming of CH4 by CO2 was carried out in a conventional fixed bed reactor system. Flow rates of reactants were controlled by mass flow controllers [Bronkhorst HI-TEC Co.]. The reactor, with an inner diameter of 0.007 m, was heated in an electric furnace. The reaction temperatoe was controlled by a PID temperature controller and was monitored by a separated thermocouple placed in the catalyst bed. The effluent gases were analyzed by an online GC [Hewlett Packard Co., HP-6890 Series II] equipped with a thermal conductivity detector (TCD) and carbosphere column (0.0032 m O.D. and 2.5 m length, 80/100 meshes), and identified by a GC/MS [Hewlett Packard Co., 5890/5971] equipped with an HP-1 capillary column (0.0002 m O.D. and 50 m length). 

The cracking of diphenylmethane (DPM) was carried out in a continuous-flow tubular reactor. The liquid feed contained 29.5 wt.% of DPM (Fluka, >99%), 70% of n-dodecane (Aldrich, >99% solvent) and 0.5% of benzothiophene (Aldrich, 95% source of H2S, to keep the catalyst sulfided during the reaction). The temperature was 673 K and the total pressure 50 bar. The liquid feed flow rate was 16.5 ml.h and the H2 flow rate 24 l.h (STP). The catalytic bed consisted of 1.0 g of catalyst diluted with enough carborundum (Prolabo, 0.34 mm) to reach a final volume of 4 cm. The effluent of the reactor was condensed at high pressure. Liquid samples were taken at regular intervals and analyzed by gas chromatography, using an Intersmat IGC 120 FL, equipped with a flame ionization detector and a capillary column (Alltech CP-Sil-SCB). 

The products of the oxidation reaction were analysed by gas chromatography (Hewlett Packard, 5880 A), employing a FID detector and equipped with a capillary column (50 m x 0.25 mm crosslinked methyl silicone gum). The reactants and products of n-hexane oxidation were analysed by gas chromatography (Hewlett Packard, 5890) equipped with a FFAP column (30 m X 0.25 mm). The identity of the products was further confined by GC-MS (Shimadzu QCMC-QP 2000A). 

Catalytic reactions. The reaction was carried out at 543-643 K by using a flow reaction system with a mixtiue of EA, NH3, and Nz in the ratio of 1/50/25 at atmospheric pressure. The flow rate of the mixture gas was 76 cm min. Prior to the reaction, the catalyst was calcined at 773 K under O2 flow for 2 h. The reaction products were analyzed by an on-line gas chromatograph (FID) which was equipped with a 30-m capillary column (TCI701). 

The catalyst testing was carried out in a gas phase downflow stainless steel tubular reactor with on-line gas analysis using a Model 5890 Hewlett-Packard gas chromatograph (GC) equipped with heated in-line automated Valeo sampling valves and a CP-sD 5 or CP-sil 13 capillary WCOT colunm. GC/MS analyses of condensable products, especially with respect to O-isotopic distribution, was also carried out using a CP-sil 13 capillary column. For analysis of chiral compounds, a Chirasil-CD capillary fused silica column was employed. 

Gas chromatograph equipped with a thermionic specific detector (TSD) DB-5 Megabore capillary column, 30 m x 0.53-mm i.d. 

Chromatographic columns (glass with stopcock and solvent reservoir, 10-mm i.d.) Fused-silica capillary column, DB-1701, 60 m x 0.32-mm i.d., O.lS-qm film thickness (14% cyanopropylphenyl)methylpolysiloxane Varian 3400 gas chromatograph equipped with a temperature-programmed SPI injector, a Varian 8100 autosampler, and a Varian Saturn II lontrap mass spectrometer Centrifuge vials, 10- and 250-mL Evaporation flasks, 100- and 250-mL Separatory funnel, 250-mL... 

Hewlett-Packard 5890 gas chromatograph with capillary split/splitless inlet with HP5971 mass-selective detector equipped with a Model 7673 autosampler Fused-silica capillary column, HP-Ultra 2, 25mx0.20-mm i.d., 0.33-qm film thickness, (5% phenyl)methylpolysiloxane... 

Hewlett-Packard Model 6890 equipped with a nitrogen-phosphorus flame ionization detector Capillary column for gas-liquid chromatography (GLC), DB-1, 0.53-mm i.d. x 15 m, l-pm film thickness (J W Scientific)... 

The products were identified by comparing the retention times of the reaction products with commercial compounds, and by GC-MS analysis in a Hewlett-Packard 5973/6890 GC equipped with an electron impact ionization at 70 eV detector and a cross-linked 5% PH ME siloxane (0.25 mm coating) capillary column. The reaction products were separated from the catalyst with filter syringes and analyzed in an Agilent 4890D and a Varian 3400 GC equipped with a flame ionization detector, and CP-Sil 8CB (30 m x 0.53 mm x 1.5 pm) and DB-1 (50 m x 0.52 mm x 1.2 pm) columns, respectively. Decane was used as an internal standard. The catalyst was thoroughly washed after reaction with acetonitrile, acetone and water, and dried overnight under vacuum at 40°C. 

Extracolumn dispersion is a major problem for the packed fused silica capillary columns with internal diameters less than 0.35 mm. Peak standeunl deviations will be in the submicroliter range and extensive equipment modification is required for operation under optimum conditions. A reasonable compromise is to esploy injection voluMs of a few hundred nanoliters or less with detector volumes of a similar or preferably smaller size. This demands considerable ingenuity on behalf of the analyst since, as... 

The extracted fractions were esterified with either BF3-MeOH reagent or diazomethane and analyzed by GLC. Gas liquid chromatography (GLC) was conducted with a Perkin-Elmer Sigma 3 equipped with flame ionization detector. Separations were obtained on a Hewlett Packard 12 m x 0.2 mm i.d. capillary column coated with methyl silicon fluid (OV-101). The temperature was maintained at 80°C for 2 min then programmed from 80 to 220°C at 8°C/min. The injector temperature was 250°C. Mass spectra were obtained on a Hewlett Packard model 5995 GC-MS mass spectrometer, equipped with a 15 m fused silica capillary column coated with 5% phenyl methyl silicone fluid. Spectra were obtained for major peaks in the sample and compared with a library of spectra of authentic compounds. 

Low reagent consumption (environmental friendly) and equipment maintenance (long lasting capillary columns)... 

GC analysis for methanol, 1-propanol, 1-butanol, pyrrolidine, N-methylpyrrolidine, 2-pynolidinone, N-methyl-2-pyrrolidinone, gamma-butrolactone, dimethylsuccinate, and N-butyl-2-pyrrolidinone was performed with a Hewlett-Packard Model 5890 Gas Chromatograph equipped with a 30-meter, 0.53 mm I.D., 0.50-micron film, Nukol capillary column (Supelco, Bellefonte, PA) and a flame ionization detector (FID). 

Metal-modified silicas were exposed to excess BuOOH vapor in order to generate the supported feri-butylperoxide complexes, followed by evacuation to remove PrOH and unreacted BuOOH. Reaction kinetics were monitored as the uptake of cyclohexene from the gas phase, using a ThermoNicolet Nexus FTIR spectrometer to measure the intensity of the o(C=C) mode. In situ spectra were recorded in custom-made glass reactors under vacuum. Formation of cyclohexene oxide was confirmed by GC/MS on an HP 6890 equipped with a DBI capillary column (J W Scientific). 

The reaction mixtures of isophorone were analysed with a gas chromatograph. The GC analyses were carried out with gas chromatograph equipped with a p-cyclodextrine capillary column (analysis temperature dihydroisophorone at 110 °C) and FID. The chromatograms were recorded and peak areas were calculated with Chromatography Station for Windows CSW32 v. 1.2 (DataApex Ltd. 2001, Prague). 

The reaction products were analyzed using an on-line gas chromatograph (HP 6890) equipped by a FID detector and a capillary column DB-5 for toluene alkylation while HP-INNOWax, was used for toluene disproportionation. 

Inlet and outlet gases were analyzed online by a Micro GC equipped with four packed columns. The liquid organic and aqueous products were analyzed using an HP 5890 GC with capillary column DB-5 and an HP 5790 GC with Porapak Q packed column, respectively. The reactor wax withdrawn periodically was analyzed by a high-temperature HP5890 GC employing an alumina-clad column. 

Noncondensable gases leaving the condensation vessels were depressurized (by means of an electronic back-pressure, Brooks Instrument model 5866), totalized (by means of an on-line flow gas meter, Ritter model TG05-5), and periodically analyzed with an on-line GC (Hewlett-Packard model 6890) equipped with three columns and two detectors for the analysis of Cj-C10 hydrocarbons (A1203 plot capillary column connected to a flame ionization detector), H2, CH4,... 

---