Hewlett Packard

Fig. 11-19. The drop ejection process in an inkjet printer (a) bubble nucleation (b) bubble growth and drop ejection (c) refill. [From J. H. Bohoiquez, B. P. Canfield, K. J. Courian, F. Drogo, C. A. E. Hall, C. L. Holstun, A. R. Scandalis, and M. E. Shepard, Hewlett-Packard J. 45(1), 9-17 (Feb. 1994). Copyright 1994, Hewlett-Packard Company. Reproduced with permission.]...

Hewlett-Packard Company and Oregon Graduate Institute of Science Technology... 

Ferroelectric—polymer composite devices have been developed for large-area transducers, active noise control, and medical imaging appHcations. North American Philips, Hewlett-Packard, and Toshiba make composite medical imaging probes for in-house use. Krautkramer Branson Co. produces the same purpose composite transducer for the open market. NTK Technical Ceramics and Mitsubishi Petrochemical market ferroelectric—polymer composite materials (108) for various device appHcations, such as a towed array hydrophone and robotic use. Whereas the composite market is growing with the invention of new devices, total unit volume and doUar amounts are small compared to the ferroelectric capacitor and ferroelectric—piezoelectric ceramic markets (see Medical imaging technology). 

TOF (foiMALDI) Kratos Analytical, Fisons Instmments, Finnigan, Hewlett-Packard, Bmker, Vestec, Waters 75-250 25... 

Chromatography, 2nd ed., Hewlett-Packard Co., Palo Alto, Calif., 1981. 

Purity. Gas chromatographic analysis is performed utilizing a wide-bore capillary column (DB-1, 60 m x 0.32 mm ID x 1.0 //m film) and a flame ionization detector in an instmment such as a Hewlett-Packard 5890 gas chromatograph. A caUbration standard is used to determine response factors for all significant impurities, and external standard calculation techniques are used to estimate the impurity concentrations. AHyl chloride purity is deterrnined by difference. 

M. S. Klee, GC Inlets—Mn Introduction Hewlett Packard, Avondale, Pa., 1990. 

Distribution of benzodiazepines in I-octanol - water system was investigated by a direct shake flask method at the presence of the compounds used in HPLC mobile phases the phosphate buffer with pH 6,87 (substances (I) - (II)), acetic and phosphate buffer, perchloric acid at pH 3 (substances (III) - (VI)). Concentrations of substances in an aqueous phase after distribution controlled by HPLC (chromatograph Hewlett Packard, column Nucleosil 100-5 C, mobile phase acetonitrile - phosphate buffer solution with pH 2,5, 30 70 (v/v)). 

The Third Edition was prepared on an IBM-PC and the previous IBM files were converted into Macintosh files. These have now been reformatted on a Macintosh LC575 computer and all further data to complete the Fourth Edition were added to these files. The text was printed with a Hewlett-Packard 4MV -600dpi Laser Jet printer which gives a clearer resolution. 

I thank J. J. Kirkland and J. J. DeStefano of Hewlett-Packard for reviewing the technical information presented in this chapter and for their helpful advice. I also thank L. Amos and P. E. Antle of Writers, Inc., for their assistance in preparing the text and tables. Zorbax is a registered trademark of the DuPont Company. 

Pyrolyzer CDS Model Pyroprobe 2000 with coil sample probe and quartz boat sample holder Pyrolysis temperature about 650°C for 20 sec Pyrolysis sample size 0.2-0.3 mg GC Hewlett Packard Model 5890... 

GC/MS Hewlett Packard HP5890 connected to HP5971 mass detector with a jet separator... 

The only other group to have performed comprehensive multidimensional reverse-phase HPLC-CZE separations is at Hewlett-Packard. In 1996, a two-dimensional LC-CE instrument was described at the Erederick Conference on Capillary Electrophoresis by Vonda K. Smith (21). The possibility for a commercial multidimensional instrument may have been explored at that time. 

Rt is ironic that such an intensely computational mathematical science as chaos theory owes much of its modern origin to calculations that were performed not on a large mainframe computer but rather a simple programmable pocket calculator, a Hewlett-Packard HP-65 Feigenbaum would explain years later that had the series of intermediate calculations not been carried out sufficiently slowly, it is likely that most of the key observations would have been missed [feigSOa]. 

All P.M.R. spectra were measured with a Varian HA 100 spectrometer operating in the frequency-sweep mode with tetramethylsilane as the reference for the internal lock. The double and triple resonance experiments were performed using a Hewlett Packard 200 CD audio-oscillator and a modified Hewlett Packard 200 AB audio-oscillator (vide infra). Spectra were measured using whichever sweep width was required to ensure adequate resolution of the multiplets under investigation, generally 250 or 100 Hz, and sweep rates were selected as necessary. Extensive use was made of the Difference 1 and Difference 2 calibration modes of the instrument, both for the decoupling experiments and for the calibration of normal spectra. 

Figure 1. Circuit diagram showing a fine-frequency control for a Hewlett-Packard 200 AB Audio-oscillator.

The authors wish to thank J. C. Lewis for his help in the modification of the frequency control for the Hewlett-Packard 200 ab Audi-oscillator. 

Ethanol production in the fermentation process was detected with gas chromatography, HP 5890 series II (Hewlett-Packard, Avondale, PA, USA) equipped with a flame ionisation detector (FID) and GC column Porapak QS (Alltech Associates Inc., Deerfield, IL, USA) 100/120 mesh. The oven and detector temperature were 175 and 185 °C, respectively. Nitrogen gas was used as a carrier. Isopropanol was used as an internal standard. 

Ethanol concentration in the fermentation broth is determined by using gas chromatography (HP 5890 series II with HP Chemstation data processing software, Hewlett-Packard, Avondale, PA) with a Poropak Q Column, and a Hewlett-Packard model 3380A integrator. A flame ionisation detector (FID) is used to determine ethanol. The oven temperature is maintained at 180 °C, and the injector and detector temperature are maintained at 240 °C. The sample taken from the fermentation media has to be filtered and any internal standard must be added for analysis based on internal standard methods otherwise, the area under the peak must be compared with known standard samples for calculation based on external standard methods. 

Rasmussen, S., Shrink Data and Mold Error, Camas, Wash., Hewlett-Packard, 1989. 

Analytical gas chromatography was carried out using a Hewlett-Packard Model 5750 instrument and a SE-30 column. 

---