Elemental analysis trace metals

Trace-element analysis of metals can give indications of the geographic provenance of the material. Both emission spectroscopy (84) and activation analysis (85) have been used for this purpose. Another tool in provenance studies is the measurement of relative abundances of the lead isotopes (86,87). This technique is not restricted to metals, but can be used on any material that contains lead. Finally, for an object cast around a ceramic core, a sample of the core material can be used for thermoluminescence dating. 

Dulski, T.R. Trace Elemental Analysis of Metals. Methods and Techniques. Marcel Dekker, New York (1999)... 

Allen, L., St, G., Myers, D. P., and Brushwyler, K. (1998).Trace elemental analysis of metals by laser ablation inductively coupled plasma time-of-flight mass spectrometry. Phys. Status SoUdiA 167(2), 357. 

Morse, C. E. (1994). The use of mixed gas plasma for trace elemental analysis of metal alloys using inductively coupled plasma mass spectrometry. Unpublished M.S.Thesis, MarshaU University, Huntington, WV. 

Analysis of Trace or Minor Components. Minor or trace components may have a significant impact on quaHty of fats and oils (94). Metals, for example, can cataly2e the oxidative degradation of unsaturated oils which results in off-flavors, odors, and polymeri2ation. A large number of techniques such as wet chemical analysis, atomic absorption, atomic emission, and polarography are available for analysis of metals. Heavy metals, iron, copper, nickel, and chromium are elements that have received the most attention. Phosphoms may also be detectable and is a measure of phosphoHpids and phosphoms-containing acids or salts. 

Chemical Composition. Chemical compositional data iaclude proximate and ultimate analyses, measures of aromaticity and reactivity, elemental composition of ash, and trace metal compositions of fuel and ash. All of these characteristics impact the combustion processes associated with wastes as fuels. Table 4 presents an analysis of a variety of wood-waste fuels these energy sources have modest energy contents. 

The combination of oxidi2ing effect, acidic strength, and high solubiHty of salts makes perchloric acid a valuable analytical reagent. It is often employed in studies where the absence of complex ions must be ensured. The value of wet ashing techniques, in which perchloric acid is used to destroy organics prior to elemental analysis for the determination of trace metals in organics, has been well estabHshed (see Trace and residue analysis). 

Chemical Properties. Elemental analysis, impurity content, and stoichiometry are determined by chemical or iastmmental analysis. The use of iastmmental analytical methods (qv) is increasing because these ate usually faster, can be automated, and can be used to determine very small concentrations of elements (see Trace AND RESIDUE ANALYSIS). Atomic absorption spectroscopy and x-ray fluorescence methods are the most useful iastmmental techniques ia determining chemical compositions of inorganic pigments. Chemical analysis of principal components is carried out to determine pigment stoichiometry. Analysis of trace elements is important. The presence of undesirable elements, such as heavy metals, even in small amounts, can make the pigment unusable for environmental reasons. 

The ash analysis receives special attention because of certain trace metals in the ash that cause corrosion. Elements of prime concern are vanadium, sodium, potassium, lead, and calcium. The first four are restricted because of their contribution to corrosion at elevated temperatures however, all these elements may leave deposits on the blading. 

Lubricating oil analysis, as the name implies, is an analysis technique that determines the condition of lubricating oils used in mechanical and electrical equipment. It is not a tool for determining the operating condition of machinery. Some forms of lubricating oil analysis will provide an accurate quantitative breakdown of individual chemical elements, both oil additive and contaminates, contained in the oil. A comparison of the amount of trace metals in successive oil samples can indicate wear patterns of oil wetted parts in plant equipment and will provide an indication of impending machine failure. 

Holzbecker and Ryan [825] determined these elements in seawater by neutron activation analysis after coprecipitation with lead phosphate. Lead phosphate gives no intense activities on irradiation, so it is a suitable matrix for trace metal determinations by neutron activation analysis. Precipitation of lead phosphate also brings down quantitatively the insoluble phosphates of silver (I), cadmium (II), chromium (III), copper (II), manganese (II), thorium (IV), uranium (VI), and zirconium (IV). Detection limits for each of these are given, and thorium and uranium determinations are described in detail. Gamma activity from 204Pb makes a useful internal standard to correct for geometry differences between samples, which for the lowest detection limits are counted close to the detector. 

In the analysis of seawater, isotope dilution mass spectrometry offers a more accurate and precise determination than is potentially available with other conventional techniques such as flameless AAS or ASV. Instead of using external standards measured in separate experiments, an internal standard, which is an isotopically enriched form of the same element, is added to the sample. Hence, only a ratio of the spike to the common element need be measured. The quantitative recovery necessary for the flameless atomic absorption and ASV techniques is not critical to the isotope dilution approach. This factor can become quite variable in the extraction of trace metals from the salt-laden matrix of seawater. Yield may be isotopically determined by the same experiment or by the addition of a second isotopic spike after the extraction has been completed. 

The considerable difficulty of trace element analysis in a high salt matrix such as seawater, estuarine water, or brine is clearly reflected in the literature. The extremely high concentrations of the alkali metals, alkaline earth metals, and... 

A logical approach which serves to minimise such uncertainties is the use of a number of distinctly different analytical methods for the determination of each analyte wherein none of the methods would be expected to suffer identical interferences. In this manner, any correspondence observed between the results of different methods implies that a reliable estimate of the true value for the analyte concentration in the sample has been obtained. To this end Sturgeon et al. [21] carried out the analysis of coastal seawater for the above elements using isotope dilution spark source mass spectrometry. GFA-AS, and ICP-ES following trace metal separation-preconcentration (using ion exchange and chelation-solvent extraction), and direct analysis by GFA-AS. These workers discuss analytical advantages inherent in such an approach. 

The potential for the employment of plasma emission spectrometry is enormous and it is finding use in almost every field where trace element analysis is carried out. Some seventy elements, including most metals and some non-metals, such as phosphorus and carbon, may be determined individually or in parallel. As many as thirty or more elements may be determined on the same sample. Table 8.4 is illustrative of elements which may be analysed and compares detection limits for plasma emission with those for ICP-MS and atomic absorption. Rocks, soils, waters and biological tissue are typical of samples to which the method may be applied. In geochemistry, and in quality control of potable waters and pollution studies in general, the multi-element capability and wide (105) dynamic range of the method are of great value. Plasma emission spectrometry is well established as a routine method of analysis in these areas. 

Flame emission spectrometry is used extensively for the determination of trace metals in solution and in particular the alkali and alkaline earth metals. The most notable applications are the determinations of Na, K, Ca and Mg in body fluids and other biological samples for clinical diagnosis. Simple filter instruments generally provide adequate resolution for this type of analysis. The same elements, together with B, Fe, Cu and Mn, are important constituents of soils and fertilizers and the technique is therefore also useful for the analysis of agricultural materials. Although many other trace metals can be determined in a variety of matrices, there has been a preference for the use of atomic absorption spectrometry because variations in flame temperature are much less critical and spectral interference is negligible. Detection limits for flame emission techniques are comparable to those for atomic absorption, i.e. from < 0.01 to 10 ppm (Table 8.6). Flame emission spectrometry complements atomic absorption spectrometry because it operates most effectively for elements which are easily ionized, whilst atomic absorption methods demand a minimum of ionization (Table 8.7). 

Srinivasan, S. (1999). Lead isotope and trace element analysis in the study of over a hundred South Indian metal icons. Archaeometry 41 91-116. 

The introduction of EU directives on Waste Electrical and Electronic Equipment and Reduction of Hazardous Substances has highlighted the need for precise and repeatable elemental analysis of heavy metals in the plastics production process. X-ray fluorescence (XRF) spectroscopy has emerged as the most economical and effective analytical tool for achieving this. A set of certified standards, known as TOXEL, is now available to facilitate XRF analyses in PE. Calibration with TOXEL standards is simplified by the fact that XRF is a multi-element technique. Therefore a single set of the new standards can be used to calibrate several heavy elements, covering concentrations from trace level to several hundred ppm. This case study is the analysis of heavy metals in PE using an Epsilon 5 XRF spectrometer. 

---