Redox systems

Figure A2.4.13. Potential energy of a redox system as a fiinction of ligand-metal separation. From [7].

The redox (electrode) potential for ion-ion redox systems at any concentration and temperature is given by the Nernst equation in the form... 

In addition to CuCfi, some other compounds such as Cu(OAc)2, Cu(N03)2-FeCl.i, dichromate, HNO3, potassium peroxodisulfate, and Mn02 are used as oxidants of Pd(0). Also heteropoly acid salts comtaining P, Mo, V, Si, and Ge are used with PdS04 as the redox system[2]. Organic oxidants such as benzo-quinone (BQ), hydrogen peroxide and some organic peroxides are used for oxidation. Alkyl nitrites are unique oxidants which are used in some industrial... 

Formation of acetaldehyde and metallic Pd by passing ethylene into an aqueous solution of PdCl2 was reported by Phillips in 1894 15] and used for the quantitative analysis of Pd(II)[16], The reaction was highlighted after the industrial process for acetaldehyde production from ethylene based on this reaetion had been developed[l,17,18]. The Wacker process (or reaction) involves the three unit reactions shown. The unique feature in the Wacker process is the invention of the in situ redox system of PdCl2-CuCl2. 

Ladder diagrams can also be used to evaluate equilibrium reactions in redox systems. Figure 6.9 shows a typical ladder diagram for two half-reactions in which the scale is the electrochemical potential, E. Areas of predominance are defined by the Nernst equation. Using the Fe +/Fe + half-reaction as an example, we write... 

Copolymerization is effected by suspension or emulsion techniques under such conditions that tetrafluoroethylene, but not ethylene, may homopolymerize. Bulk polymerization is not commercially feasible, because of heat-transfer limitations and explosion hazard of the comonomer mixture. Polymerizations typically take place below 100°C and 5 MPa (50 atm). Initiators include peroxides, redox systems (10), free-radical sources (11), and ionizing radiation (12). 

Hydrogen peroxide may react directiy or after it has first ionized or dissociated into free radicals. Often, the reaction mechanism is extremely complex and may involve catalysis or be dependent on the environment. Enhancement of the relatively mild oxidizing action of hydrogen peroxide is accompHshed in the presence of certain metal catalysts (4). The redox system Fe(II)—Fe(III) is the most widely used catalyst, which, in combination with hydrogen peroxide, is known as Fenton s reagent (5). 

Water. Latices should be made with deionized water or condensate water. The resistivity of the water should be at least lO Q. Long-term storage of water should be avoided to prevent bacteria growth. If the ionic nature of the water is poor, problems of poor latex stabiUty and failed redox systems can occur. Antifreeze additives are added to the water when polymerization below 0°C is required (37). Low temperature polymerization is used to limit polymer branching, thereby increasing crystallinity. 

The most common water-soluble initiators are ammonium persulfate, potassium persulfate, and hydrogen peroxide. These can be made to decompose by high temperature or through redox reactions. The latter method offers versatility in choosing the temperature of polymerization with —50 to 70°C possible. A typical redox system combines a persulfate with ferrous ion ... 

Reducing agents are employed to return the Fe to Fe . By starting at a lower temperature, the heat of reaction can be balanced by the sensible heat of the water in the emulsion. Temperature profiles from 20 to 70°C are typical for such systems. Care must be taken when working with redox systems to... 

Dialkyl oxalates can be prepared by oxidative CO coupling in the presence of alcohols. The first reported example of the synthesis was in a PdCl2—CUCI2 redox system (30,31). 

Hydroquinone [123-31 -9] represents a class of commercially important black-and-white chemical reducing agents (see Hydroquinone,RESORCINOL, AND catechol). The following scheme for silver haUde development with hydroquinone shows the quantitative importance of hydrogen ion and haUde ion concentrations on the two half-ceU reactions that describe the silver—hydroquinone redox system ... 

This catalyst system is temperature-sensitive and does not function effectively at temperatures below 10°C but at temperatures over 35°C the generation of free radicals can be too prolific, giving rise to incomplete cross-linking formation. Redox systems are preferred for fabrication at temperatures ranging from 20—30°C (Fig. 5). 

The action of redox metal promoters with MEKP appears to be highly specific. Cobalt salts appear to be a unique component of commercial redox systems, although vanadium appears to provide similar activity with MEKP. Cobalt activity can be supplemented by potassium and 2inc naphthenates in systems requiring low cured resin color lithium and lead naphthenates also act in a similar role. Quaternary ammonium salts (14) and tertiary amines accelerate the reaction rate of redox catalyst systems. The tertiary amines form beneficial complexes with the cobalt promoters, faciUtating the transition to the lower oxidation state. Copper naphthenate exerts a unique influence over cure rate in redox systems and is used widely to delay cure and reduce exotherm development during the cross-linking reaction. 

Another unique redox system used for extending gel times consists of cumene hydroperoxide and manganese naphthenate, which provides consistent gel times of between two and four hours over a temperature range of 25—50°C. 

Tertiary amines are also effective as accelerators in cobalt redox systems to advance the cure rate (Eig. 6). Hardness development measured by Shore D or Barcol D634-1 penetrometer can be used to demonstrate this benefit, which is useful in increasing mold turnover at ambient temperatures. 

In addition to appHcations in dyeing, sodium formaldehyde sulfoxylate is used as a component of the redox system in emulsion polymerization of styrene—butadiene mbber recipes. 

The most significant chemical characteristic of L-ascorbic acid (1) is its oxidation to dehydro-L-ascorbic acid (L-// fi (9-2,3-hexodiulosonic acid y-lactone) (3) (Fig. 1). Vitamin C is a redox system containing at least three substances L-ascorbic acid, monodehydro-L-ascorbic acid, and dehydro-L-ascorbic acid. Dehydro-L-ascorbic acid and the intermediate product of the oxidation, the monodehydro-L-ascorbic acid free radical (2), have antiscorbutic activity equal to L-ascorbic acid. 

Because of the time and expense involved, biological assays are used primarily for research purposes. The first chemical method for assaying L-ascorbic acid was the titration with 2,6-dichlorophenolindophenol solution (76). This method is not appHcable in the presence of a variety of interfering substances, eg, reduced metal ions, sulfites, tannins, or colored dyes. This 2,6-dichlorophenolindophenol method and other chemical and physiochemical methods are based on the reducing character of L-ascorbic acid (77). Colorimetric reactions with metal ions as weU as other redox systems, eg, potassium hexacyanoferrate(III), methylene blue, chloramine, etc, have been used for the assay, but they are unspecific because of interferences from a large number of reducing substances contained in foods and natural products (78). These methods have been used extensively in fish research (79). A specific photometric method for the assay of vitamin C in biological samples is based on the oxidation of ascorbic acid to dehydroascorbic acid with 2,4-dinitrophenylhydrazine (80). In the microfluorometric method, ascorbic acid is oxidized to dehydroascorbic acid in the presence of charcoal. The oxidized form is reacted with o-phenylenediamine to produce a fluorescent compound that is detected with an excitation maximum of ca 350 nm and an emission maximum of ca 430 nm (81). 

Emulsion Polymerization. In this method, polymerization is initiated by a water-soluble catalyst, eg, a persulfate or a redox system, within the micelles formed by an emulsifying agent (11). The choice of the emulsifier is important because acrylates are readily hydrolyzed under basic conditions (11). As a consequence, the commonly used salts of fatty acids (soaps) are preferably substituted by salts of long-chain sulfonic acids, since they operate well under neutral and acid conditions (12). After polymerization is complete the excess monomer is steam-stripped, and the polymer is coagulated with a salt solution the cmmbs are washed, dried, and finally baled. 

Electrochemical corrosion is understood to include all corrosion processes that can be influenced electrically. This is the case for all the types of corrosion described in this handbook and means that data on corrosion velocities (e.g., removal rate, penetration rate in pitting corrosion, or rate of pit formation, time to failure of stressed specimens in stress corrosion) are dependent on the potential U [5]. Potential can be altered by chemical action (influence of a redox system) or by electrical factors (electric currents), thereby reducing or enhancing the corrosion. Thus exact knowledge of the dependence of corrosion on potential is the basic hypothesis for the concept of electrochemical corrosion protection processes. 

The effects of alternating currents are much less of a corrosion danger than those of direct currents. Experiments on steel have shown that during the positive half wave [34-37] only about 1 % contributes to the dissolution of iron according to Eq. (2-21). The remaining 99% is involved in the discharge of capacitances, of redox systems (e.g., Fe /Fe in surface films) or in the evolution of Oj by... 

Fig. 21-8 Reference electrodes (Pt to redox system) for high pressures and temperatures (max. 250 C and 100 bar).

Generally the oxidant is compounded in one part of the adhesive, and the reductant in the other. Redox initiation and cure occur when the two sides of the adhesive are mixed. There also exist the one-part aerobic adhesives, which use atmospheric oxygen as the oxidant. The chemistry of the specific redox systems commonly used in adhesives will be discussed later. The rates of initiation and propagation are given by the following equations ([9] p. 221). 

Ascorbic acid is a reasonably strong reducing agent. The biochemical and physiological functions of ascorbic acid most likely derive from its reducing properties—it functions as an electron carrier. Loss of one electron due to interactions with oxygen or metal ions leads to semidehydro-L-ascorbate, a reactive free radical (Figure 18.30) that can be reduced back to L-ascorbic acid by various enzymes in animals and plants. A characteristic reaction of ascorbic acid is its oxidation to dehydro-L-aseorbie add. Ascorbic acid and dehydroascor-bic acid form an effective redox system. 

Nitrogen-containing fulvalenes, particularly their di- and tetraazaderiva-tives, have to be classified in the large group of organic compounds which comprise two-step redox systems (78AG927) (Scheme 46). 

---