Button, buttons

Coke button button-shaped piece of coke resulting from a standard laboratory test that indicates the coking or free-swelling characteristics of coal a coke button is usually expressed in numbers from 1 to 9, representing the size of the coke as compared to a standard the more a coal swells and cokes, the higher the number assigned to it. 

Shank buttons have a hollow protmsion on the hack through which thread is sewn to attach the button. Button shanks may be made from a separate piece of the same or a different substance as the button itself, and added to the back of the button, or can be carved or molded directly onto the hack of the button, in which case the button is referred to by collectors as having a self-shank. ... 

To extract some other root. (1) enter the number y (2) touch the (TNV) and then the (y ) function is performed bytheVy button (3) enter the root to be extracted, x and (4) touch the (=) button. button. 

Fig.6 Example of trend vs time parameter representation the view is Epical of a paper recorder, with time in Y coordinate decreasing from the top to the bottom. The eight top buttons represent the different choice of plant parameters...

The fish block will be moved through the X-ray beam and the resulting image is studied on the high resolution monitor. The operator has the ability to judge a block as acceptable, rejectable or downgrade able via push-button. 

Within the preset time limit, the operator can at any time press the reject button, which will close the on/off shutter, open the exit panel and move the block on to an output conveyor At the same time the entrance panel will open to admit the next block awaiting inspection. 

The accept and downgrade buttons are interlocked with a sensor device, so that a block must be scanned at least once before the block can be accepted and loaded out by the operator This function will however always be overruled by the programmed safety time limit, which will automatically reject and outload the block when the allowed exposure time has elapsed. 

If neither the accept, downgrade or reject button is pushed during inspection, the block will automatically be out loaded after the time limit has expired. The accept/reject/downgrade buttons will flash prompting the inspector for a decision. 

The TU contains current electrodes CEl, CE2, potential electrodes PE1,PE2, driver amplifier (DA), button B to start measuring processor. 

Keyboard is a contact matrix of dimension 3x4. In order to handle it, the principle of scanning buttons at running zero on input lines is used in SC EDC. 

The operator sets TU on the area to be controlled and puts the button B Under the command of SC EDC impulse of proper value and duration is formed in source controllable current (SCC). 

Signal/Coupling. The channel to be displayed in the A-scan window is selected with the appropriate button. 

Rectified/Unrectified. The format of the A-scan signal displayed is selected using the appropriate button. The coupling channel signal is only available as a rectified signal. 

The probes themselves could be fitted with a button, like a computer mouse, for clicking when over a grid point. This would allow one-hand operation and make sampling in... 

In 1964 Douglas Cart Engelbart (Stanford Research Institute in California) developed the mouse as an input device and Bill Enghsh built its prototype from a carved block of wood with a single red button. Shortly thereafter, the mouse was used at the Lister Hill Center of the National Institutes of Health for the input of chemical structures. 

Institute of Technology (MIT) [193]. Molecules were represented as line drawings on a homemade display (an oscilloscope (Figure 2-122). In addition, the system had diverse peripherals with many switches and buttons which allowed the modification of the scene. The heart of the. system was the. so-called Crystal Ball" which could rotate the molecule about all three orthogonal axes. This prototype cost approximately two million US dollars. 

The applet may also be used in a depiction mode as a molecule viewer (without editing buttons), to visualize molecules. Internal J ME format or M DL Molfiles may be viewed in this way. 

Figure 2-135. Hemoglobin displayed on a web-page with Chime. The display can be manipulated interactively with the mouse button.

When the button "submit smiles is pressed, the SMILES string is sent to the web server of Molsoft, converted to 3D, and the 3D structure is displayed in a java molecule viewer on an automatically created web page (see Figure 2-139). Unfortunately, the Molsoft server does not support downloading of the 3D structures in a standard file format. 

If the query provides thousands of hits, the analyze features are particularly advantageous. One method is to analyze the results by any of the criteria that arc listed, c.g., by language (default), author names, journals, puhlication year, and so on. If one specification is selected and the choice is modified, the hit list will be updated. A more specific analysis is available with the Refine" option. where the user has the opportunity to choose one of eight criteria (including the search topics above) with further individual input. Several refinements of the hit list can reduce the result to a concise list of literature. To read the abstract of an article, the microscope button (to the right of the citation) has to be pressed (Figure 5-15). 

In order to allow any multiple chlorination of the biphenyl skeleton, the user may define an atom list (eonsisting of hydrogen and chlorine atoms) and substitute all H-atoms by this list. One may click on the drop-down selection box behind the element icons, select the options Generics. .set the user-defined atom to A1 and quit by the OK button. As a result this atom selection is active for the subsequent drawing steps. After this atom list is drawn ten times as the ten substituents, its composition has to be defined by clicking the A, icon on the left-hand side of the structure editor and by selecting H and Cl in the periodic table (Figure 5-16). 

Select the network type Kohonen network. Transfer selection by pressing the button "submission . 

Click the Select network parameter button and choose the Kohonen network pai ameters topology, width and height of the network, neuron dimension, the index of the class identifier, and the number of training cycles,... 

In order to draw a desired target compound WODCA provides a molecule editor which has to be launched. This can be performed by pressing the "New Compound" button in WODCA s button bar, The molecule editor is then started and aftei"wards the target compound can be drawn directly with the mouse. 

---