View button

Fig. 15. Graphical overview of primer hits from the nucleotide-nucleotide search problem 1 on the human genome. Press the Genome View button highlighted by a rectangle to see hits on the human chromosomes.

Clicking the XY View button changes from a spherical display to a three dimensional figure where the axis represent time, rf offset and one Cartesian coordinate. This change consists of an internal transformation from a spherical to CARTESIAN coordinate system. 

Repeat Check it 4.3.3.1 and after the spherical representation is generated click on the XY View button in the option bar. Click the X button in the new option bar to display the x-component of the magnetization for the individual offsets as a 3D graph. Now click the Projections button to simplify the display further to a 2D graph. The 3D and 2D representations should be similar to graphs in result.pdf tWe. 

Click the View button and complete the page as shown in the Figure 2-12. (Low Bound 450 K High Bound 550 K Step Size 10 K)... 

View buttons Allows the user to switch to different View opdons. 

The values are entered by clicking the Dynamics button on the top toolbar (see Fig. 7.2). If this button is not displayed, click the View button, then Toolbar and check the Dynamics... 

The components associated to a given fluid package can be selected by clicking on the view button under Component List Selection. The components can be selected directly from the list (by clicking on the Add Pure button), removed from the list. 

Clicking the View button cycles through the different view options while clicking the arrow next to the button displays a menu of options. 

As mentioned in the previous section, loop files irom Sonic Foundry (or any audio files that have been ACIDized) have some information about pitch, heat, and tempo saved with the file that instruct ACID how to deal with it. This information becomes relevant when the loop is inserted into a track in an ACID project. This means that a loop s default properties are identical to those of the track into which it is inserted. While both the loop s properties and its associated track s properties can be changed independently, changes to a loop s properties are permanent and saved to the media file on your hard disk. Changes to a track s properties are saved only to the current project. Many of a loop s properties are displayed in the Explorer window in the Summary View area (click the View button to view/hide this feature) when a media file is selected (see Figure 9.1). 

For video that is intended to go back out to your camcorder and television screen, file size and transmission are not issues. You must maintain absolutely 100 percent of the quality of the original, and that means that you do not want to re-render the video. The only way to do this is to use exactly the same settings in your original video. To find the proper render settings, select the file in the Explorer window and look in the Summary View (see Figure 11.9). If the Summary View is not visible, click the arrow next to the Views button and make sure Summary View is checked. 

In the upper right hand corner of the MANAGE GROUPS window, is a self-scroll menu bar. This will automatically default and load Classes Otherwise, select Classes from this menu. Once you are in the Classes window, scroll down to find your class. Click the VIEW button on the right hand-side. 

Fig.6 Example of trend vs time parameter representation the view is Epical of a paper recorder, with time in Y coordinate decreasing from the top to the bottom. The eight top buttons represent the different choice of plant parameters...

The applet may also be used in a depiction mode as a molecule viewer (without editing buttons), to visualize molecules. Internal J ME format or M DL Molfiles may be viewed in this way. 

View the contour map m several planes to see the general Torm of the distiibiiiioii. As long as you don t alter the molecular coordinates, you don t need to repeat th e wave function calculation. Use the left mouse button and the IlyperChem Rotation or Translation tools (or Tool icons ) to change the view of amolecnle without changing its atomic coordinates. 

Data View for viewing contents of data files in tabular form coded/decoded information can be viewed with a button click -columns of data can be set in "show" or "hide" mode multiple data files can be viewed at the same time data files can also be edited when in view mode. 

W. H. Freeman and Company is pleased to offer you the ability to create a unique lab manual for your course in just minutes. Drawing from our diverse library of experiments, you can pick and choose the labs you want to use, and even add your own materials. Organize the material as you like, customize the cover, view your newly created book online in PDF format, and then order it online with the click of a button. W. H. Freeman s state-of-the art custom publishing system is easy to use and an excellent alternative to traditional lab manuals. Try it today at http //custompub.whfreeman.com... 

Swagelok fitting welded on the button stage of reactor for gas exit, (9) port of reactor for sample and tip transfer, (b) Side view of the STM body (1) Wall of STM body coated with a layer of gold, (2) hexagonal sapphire, (3) CuBe spring plates, (4) receiver of tip holder, (5) screw to adjust the pressure... 

From the point of view of the authors it is advisable not to overemphasize the ideas of optimization and the desire for one-button solutions. A good compromise can be found if the overall production situation can be made transparent just-in-time to the motivated employees and if reasonable business processes have been established. 

Notice that one actor s view of the component often includes some understanding of the component s effect on third parties, if the actor has some means of access to them outside the system. For example, suppose I press some buttons on my phone, and then say "come to dinner at 8pm" to it I do not expect the phone to appear at the table in the evening nor do I imagine that my only access to my invitees is by shovelling the food down the wire. Instead, I understand that what I do to the phone has an effect on people with whom I have other means of interaction. 

While the protocol described above has proven very useful in its own right, it often serves as the first step in designing custom protocols for a team. Once a user is satisfied with the results returned by the ad hoc query, the next step is often to hardwire these queries into a protocol that provides one-button access to all the pertinent data for a project. Figure 5 shows such a protocol used to retrieve data for several assays in a Neuroscience project. This protocol highlights an additional filtering option that we make use of in many of our protocols. The text box ( selected cmpds from list ) (7) supports the input of a list of identification numbers (in our case either jnjnumber or batchid ). This allows data to be retrieved on select compounds as opposed to all those tested in the assays. This feature is very popular and involves the use of Perl within the Pipeline Pilot protocol. All this work is done on the server and the results are written to a SD file that can be downloaded to the desktop. At this stage either DIVA or Accord for Excel is typically used to view the files. 

The first thing we want to do is place your name and class information on your schematic. In the bottom right comer of your schematic is a title block. To see this block we must scroll the view of the page to the bottom right comer. To do this, click the LEFT mouse button on the vertical and horizontal scroll bars as shown below ... 

We can repeat the procedure and zoom in further. Select View, Zoom, and then In to obtain the crosshairs. Place the crosshairs where you would like to enlarge the plot and click the LEFT mouse button ... 

To zoom in on a particular spot on the screen, select View and then In from the Capture mam menu. The cursor will be replaced by crosshairs (+). Move the crosshairs to the spot on the screen where you want to zoom in. Click the LEFT mouse button. Repeat the steps to make the drawing larger if necessary. 

The left pane lists the voltage and current traces that we have seen previously in the Add Traces dialog box. The right pane lists the available goal functions. Click the LEFT mouse button on the vertical scroll bar in the right pane to view more goal functions ... 

Note that the Sweep Variable is a Voltage source, and that there is a checkmark in the squares to enable both the Secondary and Primary sweeps. The Secondary Sweep uses the Value list, which sets VCE to 2, 5, 10, and 15 volts. Click the OK button to return to the schematic. Simulate the circuit (select PSpice and then Run or press the F11 key) and then view the results with Probe. Plot Hfe versus p Use the same procedure to generate the plot that we used on pages 248-249. Four curves will be displayed ... 

Click the LEFT mouse button on the down triangle to view the list of available /7d/)[Pg.281]

Since there were four simulations, one for each value of parameter RF val, Probe is asking which of the simulations we would like to view. You can look at any combination of the runs. By default, all of the simulations are selected. We would like to look at all of the simulations at the same time, so click the OK button to accept the runs. You will be presented with... 

Click the OK button twice to accept the changes and view the trace. You should see the hysteresis curve ... 

---