Button primary cells alkaline batteries

Alkaline-manganese dioxide primary cells and batteries are available in a variety of sizes, in both cylindrical and miniature (button-cell) configurations, as listed in Table 10.9. Some of the unit cell sizes listed are not available as single cells, but are used as components in multiple-cell batteries. Figure 10.21 shows the nominal capacity of various-size batteries as a function of weight and cell volume. 

It is so universally applied that it may be found in combination with metal oxide cathodes (e.g., HgO, AgO, NiOOH, Mn02), with catalytically active oxygen electrodes, and with inert cathodes using aqueous halide or ferricyanide solutions as active materials ("zinc-flow" or "redox" batteries). The cell (battery) sizes vary from small button cells for hearing aids or watches up to kilowatt-hour modules for electric vehicles (electrotraction). Primary and storage batteries exist in all categories except that of flow-batteries, where only storage types are found. Acidic, neutral, and alkaline electrolytes are used as well. The (simplified) half-cell reaction for the zinc electrode is the same in all electrolytes ... 

Primary alkaline cells use sodium hydroxide or potassium hydroxide as tlie electrolyte. They can be made using a variety of chemistries and physical constructions. The alkaline cells of the 1990s are mostly of the limited electrolyte, dry cell type. Most primary alkaline cells are made sing zinc as the anode material a variety of cathode materials can be used. Primary alkaline cells are commonly divided into tW o classes, based on type of construction the larger, cylindrically shaped batteries, and the miniature, button-type cells. Cylindrical alkaline batteries are mainly produced using zinc-manganese dioxide chemistry, although some cylindrical zinc-mercury oxide cells are made. 

A primary battery cannot be recharged, so it is discarded when the components have reached their equilibrium concentrations, that is, when the cell is dead. We ll discuss the alkaline battery and the mercury and silver button batteries. 

Nickel(lll) oxide, prepared from a nickel(ii) salt and sodium hypochlorite, is used for the oxidation of alkanols in aqueous alkali [46]. Residual nickel(Ii) oxide can be re-activated by reaction with sodium hypochlorite. Nickel oxides have also long been used in the manufacture of the positive pole in the Edison nickel-iron rechargeable battery, now largely superseded by die lead-acid accumulator, and in the Jungner nickel-cadmium batteries used as button cells for calculators [47]. Here, prepared nickel oxide is pressed into a holding plate of perforated nickel. Such prepared plates of nickel(lli) oxide have been proposed as reagent for the oxidation, in alkaline solution, of secondary alcohols to ketones and primary alcohols to carboxylic acids [48]. Used plates can be regenerated by anodic oxidation. 

A third primary dry cell is the zinc-mercuric oxide cell depicted in Figure 17.7. It is commonly given the shape of a small button and is used in automatic cameras, hearing aids, digital calculators, and quartz-electric watches. This battery has an anode that is a mixture of mercury and zinc and a steel cathode in contact with solid mercury(II) oxide (HgO). The electrolyte is a 45% KOH solution that saturates an absorbent material. The anode half-reaction is the same as that in an alkaline dry cell,... 

FIGURE 3.23 Energy density, in watthours per cubic centimeter, of button batteries as a function of cell volume. (From Paul Ruetschi, Alkaline Electrolyte-Lithium Miniature Primary Batteries, J. Power Sources, vol. 7, 1982.)... 

---