Fader button

Click the Multipurpose Fader mode button to change to a Pan slider. 

As with real-world mixers, each track in ACID has a fader that is used to control the volume and panning. ACID tracks also have an FX button for effects and EQ, Solo, and Mute buttons, just as boards in the real world often do. 

Sometimes volume problems may be caused by having the entire mix bunched up in the center. By moving instruments and parts to the left or right, you can not only solve loudness and clipping problems but also increase the special characteristics of a mix. Panning can be controlled using the Fader on the various tracks click the Multipurpose fade mode button to switch the function to a Pan Fader. 

You must right-click the Multipurpose Fader Mode button and select Fhe Volume to use the Volume and FX fader to adjust the Dry/Wet mix. 

To use Assignable FX, click the Insert Assignable FX button in the Mixer window. Then select an effect from the Plug-In window that automatically opens. Paradoxically, you do not need to assign tracks to the Assignable FX bus the way you would a hardware or group bus. Instead, the Assignable FX is available to all tracks and you only need to click the Multipurpose fader mode button and select the FX from the list to adjust the volume of the effect in a particular track. 

You must right-click the Multipurpose Fader Mode button and select FYe Volume to use the Volruue aud FX feder to adjust the Dry/Wet mix. Yes, this is the same as the previous Note, but it is easy to forget, aud the FX fader and FX envelopes won t work if you dou t do this. 

---