Propylene butadiene copolymer

Very active catalysts for the preparation of strictly alternating butadiene-propylene copolymers (BPR) consist of V0(0R)2C1/i-Bu Al (R = neopentyl). The CH3 side groups in BPR stiffen the polymer chain and were expected to promote the formation of strain-induced structures. The fact that we could not detect strain-induced crystallization is probably due to an atactic configuration of the propylene units. 

The molecular weight of copolymers is controlled by means of the polymerization temperature. As Table VIII shows, butadiene-propylene copolymers with low Mooney viscosity are obtained at temperatures above -40 °C. A decrease of the reaction temperature increases the molecular weight. 

The predominance of alternating structures was established by ozonolysis and by NMR techniques. In the case of the butadiene-propylene copolymers the butadiene units appear to be predominantly of the trorts-1,4 type. 

This technique has been applied to a study of sequencing in butadiene-propylene copolymer [80-82]. Samples of highly alternating copolymers of butadiene and propylene yielded large amounts of 3-methyl 1,6 hexane dial when submitted to ozonolysis. The ozonolysis product from 4-methyl cyclohexane-1 was used as a model compound for this structure. Ozonolysis of these polymers occurs as shown next ... 

Table 5.14 shows results obtained for several butadiene-propylene copolymers having more or less alternating structure. 

The amount of alternation in these polymers can he determined if the amounts of 1,4 and 1,2 polyhutadiene structure and total propylene have been determined by infrared or NMR spectroscopy. Table 9.8 shows results obtained for several butadiene-propylene copolymers having more or less alternating structure. Similar polymers have been analysed by Kawasaki [159] by use of conventional ozonolysis methods with esters as the final products. 

Organic peroxides are used in the polymer industry as thermal sources of free radicals. They are used primarily to initiate the polymerisation and copolymerisation of vinyl and diene monomers, eg, ethylene, vinyl chloride, styrene, acryUc acid and esters, methacrylic acid and esters, vinyl acetate, acrylonitrile, and butadiene (see Initiators). They ate also used to cute or cross-link resins, eg, unsaturated polyester—styrene blends, thermoplastics such as polyethylene, elastomers such as ethylene—propylene copolymers and terpolymers and ethylene—vinyl acetate copolymer, and mbbets such as siUcone mbbet and styrene-butadiene mbbet. 

Currently, important TPE s include blends of semicrystalline thermoplastic polyolefins such as propylene copolymers, with ethylene-propylene terepolymer elastomer. Block copolymers of styrene with other monomers such as butadiene, isoprene, and ethylene or ethylene/propy-lene are the most widely used TPE s. Styrene-butadiene-styrene (SBS) accounted for 70% of global styrene block copolymers (SBC). Currently, global capacity of SBC is approximately 1.1 million tons. Polyurethane thermoplastic elastomers are relatively more expensive then other TPE s. However, they are noted for their flexibility, strength, toughness, and abrasion and chemical resistance. Blends of polyvinyl chloride with elastomers such as butyl are widely used in Japan. ... 

FIGURE 1.12 Master curve of tear energy Gc versus rate R of tear propagation at Tg for three cross-linked elastomers polybutadiene (BR, Tg — —96°C) ethylene-propylene copolymer (EPR, Tg — —60°C) a high-styrene-styrene-butadiene rubber copolymer (HS-SBR, Tg — —30°C). (From Gent, A.N. and Lai, S.-M., J. Polymer Sci., Part B Polymer Phys., 32, 1543, 1994. With permission.)... 

FIGURE 13.2 Calculated relation between the solubility parameter and glass transition temperature (Jg) for a variety of ethylene-propylene copolymers (EPMs) grafted with polar monomers the window for rubbers with an oil resistance similar to or better than hydrogenated acrylonitrile-butadiene copolymer (NBR) (20 wt% acrylonitrile) is also shown. 

Aryloxyphosphazene copolymers can also confer fireproof properties to flammable materials when blended. Dieck [591] have used the copolymers III, and IV containing small amounts of reactive unsaturated groups to prepare blends with compatible organic polymers crosslinkable by the same mechanism which crosslinks the polyphosphazene, e.g. ethylene-propylene and butadiene-acrylonitrile copolymers, poly(vinyl chloride), unsaturated urethane rubber. These blends were used to prepare foams exhibiting excellent fire retardance and producing low smoke levels or no smoke when heated in an open flame. Oxygen index values of 27-56 were obtained. 

The isoprene units in the copolymer impart the ability to crosslink the product. Polystyrene is far too rigid to be used as an elastomer but styrene copolymers with 1,3-butadiene (SBR rubber) are quite flexible and rubbery. Polyethylene is a crystalline plastic while ethylene-propylene copolymers and terpolymers of ethylene, propylene and diene (e.g., dicyclopentadiene, hexa-1,4-diene, 2-ethylidenenorborn-5-ene) are elastomers (EPR and EPDM rubbers). Nitrile or NBR rubber is a copolymer of acrylonitrile and 1,3-butadiene. Vinylidene fluoride-chlorotrifluoroethylene and olefin-acrylic ester copolymers and 1,3-butadiene-styrene-vinyl pyridine terpolymer are examples of specialty elastomers. 

It is evident that reactions of unsaturated polymers with bisnitrile oxides lead to cross-linking. Such a procedure has been patented for curing poly(butadiene), butadiene-styrene copolymer, as well as some unsaturated polyethers and polyesters (512-514). Bisnitrile oxides are usually generated in the presence of unsaturated polymers by dehydrochlorination of hydroximoyl chlorides. Cross-linking of ethylene-propylene-diene co-polymers with stable bisnitrile oxides has been studied (515, 516). The rate of the process has been shown to reduce in record with the sequence 2-chloroterephthalonitrile oxide > terephthalonitrile oxide > 2,5-dimethylterephthalonitrile oxide > 2,3,5,6-tetramethylterephthalo-nitrile oxide > anthracene-9,10-dicarbonitrile oxide (515). 

ABA ABS ABS-PC ABS-PVC ACM ACS AES AMMA AN APET APP ASA BR BS CA CAB CAP CN CP CPE CPET CPP CPVC CR CTA DAM DAP DMT ECTFE EEA EMA EMAA EMAC EMPP EnBA EP EPM ESI EVA(C) EVOH FEP HDI HDPE HIPS HMDI IPI LDPE LLDPE MBS Acrylonitrile-butadiene-acrylate Acrylonitrile-butadiene-styrene copolymer Acrylonitrile-butadiene-styrene-polycarbonate alloy Acrylonitrile-butadiene-styrene-poly(vinyl chloride) alloy Acrylic acid ester rubber Acrylonitrile-chlorinated pe-styrene Acrylonitrile-ethylene-propylene-styrene Acrylonitrile-methyl methacrylate Acrylonitrile Amorphous polyethylene terephthalate Atactic polypropylene Acrylic-styrene-acrylonitrile Butadiene rubber Butadiene styrene rubber Cellulose acetate Cellulose acetate-butyrate Cellulose acetate-propionate Cellulose nitrate Cellulose propionate Chlorinated polyethylene Crystalline polyethylene terephthalate Cast polypropylene Chlorinated polyvinyl chloride Chloroprene rubber Cellulose triacetate Diallyl maleate Diallyl phthalate Terephthalic acid, dimethyl ester Ethylene-chlorotrifluoroethylene copolymer Ethylene-ethyl acrylate Ethylene-methyl acrylate Ethylene methacrylic acid Ethylene-methyl acrylate copolymer Elastomer modified polypropylene Ethylene normal butyl acrylate Epoxy resin, also ethylene-propylene Ethylene-propylene rubber Ethylene-styrene copolymers Polyethylene-vinyl acetate Polyethylene-vinyl alcohol copolymers Fluorinated ethylene-propylene copolymers Hexamethylene diisocyanate High-density polyethylene High-impact polystyrene Diisocyanato dicyclohexylmethane Isophorone diisocyanate Low-density polyethylene Linear low-density polyethylene Methacrylate-butadiene-styrene... 

The Ziegler-Natta catalysts have acquired practical importance particularly as heterogeneous systems, mostly owing to the commercial production of linear high- and low-density polyethylenes and isotactic polypropylene. Elastomers based on ethylene-propylene copolymers (with the use of vanadium-based catalysts) as well as 1,4-cz s-and 1,4-tran.y-poly(l, 3-butadiene) and polyisoprene are also produced. These catalysts are extremely versatile and can be used in many other polymerisations of various hydrocarbon monomers, leading very often to polymers of different stereoregularity. In 1963, both Ziegler and Natta were awarded the Nobel Prize in chemistry. 

Random copolymers of butadiene, isoprene and/or pentadiene with ethylene and/or propylene have been obtained in the presence of various catalysts, mainly based on Ti or V compounds [206,207]. Statistical butadiene/ethylene copolymers can also be formed with zirconocene catalysts [162]. 

PVC can be blended with numerous other polymers to give it better processability and impact resistance. For the manufacture of food contact materials the following polymerizates and/or polymer mixtures from polymers manufactured from the above mentioned starting materials can be used Chlorinated polyolefins blends of styrene and graft copolymers and mixtures of polystyrene with polymerisate blends butadiene-acrylonitrile-copolymer blends (hard rubber) blends of ethylene and propylene, butylene, vinyl ester, and unsaturated aliphatic acids as well as salts and esters plasticizerfrec blends of methacrylic acid esters and acrylic acid esters with monofunctional saturated alcohols (Ci-C18) as well as blends of the esters of methacrylic acid butadiene and styrene as well as polymer blends of acrylic acid butyl ester and vinylpyrrolidone polyurethane manufactured from 1,6-hexamethylene diisocyanate, 1.4-butandiol and aliphatic polyesters from adipic acid and glycols. 

The following TPs are the main thermoforming materials processed high-impact and high-heat PS, HDPE, PP, PVC, ABS, CPET, PET, and PMMA. Other plastics of lesser usage are transparent styrene-butadiene block copolymers, acrylics, polycarbonates, cellulosics, thermoplastic elastomers (TPE), and ethylene-propylene thermoplastic vulcanizates. Coextruded structures of up to seven layers include barriers of EVAL, Saran, or nylon, with polyolefins, and/or styreneics for functional properties and decorative aesthetics at reasonable costs.239-241... 

FIGURE 9.17 Dependence of productivity and separation factor /3p C6H5CH3/H2O of membranes based on various rubbery polymers on the glass transition temperature of the polymer (pervaporation separation of saturated toluene/water mixture, T = 308 K) (1) polydimethyl siloxane (2) polybutadiene (3) polyoctylmethyl siloxane (4) nitrile butadiene rubber with 18% mol of nitrile groups (5) the same, 28% mol of nitrile groups (6) the same, 38% mol of nitrile groups (7) ethylene/propylene copolymer (8) polyepichlorohydrin (9) polychloroprene (10) pol3furethane (11) polyacrylate rubber (12) fluorocarbon elastomer. (From analysis of data presented in Semenova, S.I., J. Membr. Sci., 231, 189, 2004. With permission.)... 

---