Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Antimony, reactions

Diacetoxyiodobenzene has been utilized for the oxidation of organic derivatives of both bismuth and antimony.Reactions of triaryl species proceed under mild, neutral conditions to )field the corresponding pentavalent diacetates (eq 67). ... [Pg.143]

The combustion behaviour of ABS FR formulations containing SbFs and PTFE separately has confirmed that the SbFs may well be an active flame retardant agent in the systems. In its presence combustion is slowed down, yet a delay occurs before the flame is extinguished. As soon as combustion develops, the additional effect of the fluorine-containing compound is no longer significant and flame retardancy is due only to the bromine/antimony reactions. [Pg.56]

A complete set of trihalides for arsenic, antimony and bismuth can be prepared by the direct combination of the elements although other methods of preparation can sometimes be used. The vigour of the direct combination reaction for a given metal decreases from fluorine to iodine (except in the case of bismuth which does not react readily with fluorine) and for a given halogen, from arsenic to bismuth. [Pg.213]

Solutions of many antimony and bismuth salts hydrolyse when diluted the cationic species then present will usually form a precipitate with any anion present. Addition of the appropriate acid suppresses the hydrolysis, reverses the reaction and the precipitate dissolves. This reaction indicates the presence of a bismuth or an antimony salt. [Pg.254]

Other catalysts which may be used in the Friedel - Crafts alkylation reaction include ferric chloride, antimony pentachloride, zirconium tetrachloride, boron trifluoride, zinc chloride and hydrogen fluoride but these are generally not so effective in academic laboratories. The alkylating agents include alkyl halides, alcohols and olefines. [Pg.509]

Antimony Oxide as a Primary Flame Retardant. Antimony oxide behaves as a condensed-phase flame retardant in cellulosic materials (2). It can be appHed by impregnating a fabric with a soluble antimony salt followed by a second treatment that precipitates antimony oxide in the fibers. When the treated fabric is exposed to a flame, the oxide reacts with the hydroxyl groups of the cellulose (qv) causing them to decompose endothermically. The decomposition products, water and char, cool the flame reactions while slowing the production and volatilization of flammable decomposition products (see Flaa retardants for textiles). [Pg.455]

Either mechanism can be used to describe how antimony—halogen systems operate in both the condensed and vapor phases. In the condensed phase a chat that is formed during the reaction of the polymer, antimony trioxide, and the halogen reduces the rate of decomposition of the polymer therefore, less fuel is available for the flame (16). [Pg.456]

The mechanism by which tin flame retardants function has not been well defined, but evidence indicates tin functions in both the condensed and vapor phases. In formulations in which there is at least a 4-to-l mole ratio of halogen to tin, reactions similar to those of antimony and halogen are assumed to occur. Volatile stannic tetrahaUde may form and enter the flame to function much in the same manner as does antimony trihaUde. [Pg.459]

M. J. Drews, C. W. Jarvis, and G. C. Lickfield, Temay Reactions AmongPolymer Substrate—Organohalogen—Antimony Oxides Under Pyrolytic, Oxidative and Flaming Conditions, NIST-GCR-89-558, U.S. Department of Commerce, Gaithersburg, Md., 1989. [Pg.473]

The tetramethylol derivative of DABT, prepared by reaction of DABT with alkaline aqueous formaldehyde, polymerized readily on cotton. It imparted excellent flame retardancy, very durable to laundering with carbonate- or phosphate-based detergents as well as to hypochlorite bleach. This was accomphshed at low add-on without use of phosphoms compounds or antimony(III) oxide (75—77). [Pg.489]

Antimony tnfluoride is a mild fluorinating reagent. However, it is much mote effective ia the Swarts reactions where its effectiveness as a fluorinating reagent is dramatically iacteased by addition of CI2, Bt2, or SbCl to the reaction mixture (2). Antimony tnfluotide can be used for the replacement of chlorine or bromine ia halocatbons, hydtohalocatbons, and nonmetal and metal haUdes. Typical reactions can be summarized as follows ... [Pg.150]

Hexafluoroantimonic acid [72121 -43-8] HSbF 6H20, is prepared by dissolving freshly prepared hydrous antimony pentoxide ia hydrofluoric acid or adding the stoichiometric amount of 70% HF to SbF. Both of these reactions are exothermic and must be carried out carefully. [Pg.151]

Organic fluorine compounds were first prepared in the latter part of the nineteenth century. Pioneer work by the Belgian chemist, F. Swarts, led to observations that antimony(Ill) fluoride reacts with organic compounds having activated carbon—chlorine bonds to form the corresponding carbon—fluorine bonds. Preparation of fluorinated compounds was faciUtated by fluorinations with antimony(Ill) fluoride containing antimony(V) haUdes as a reaction catalyst. [Pg.266]

PET) is produced by esterification of terephthahc acid [100-21 -0] (1) to form bishydroxyethyl terephthalate [959-26-2] (BHET) (2). BHET polymerizes in a transesterification reaction catalyzed by antimony oxide to form PET (3). [Pg.357]

Replacement of Labile Chlorines. When PVC is manufactured, competing reactions to the normal head-to-tail free-radical polymerization can sometimes take place. These side reactions are few ia number yet their presence ia the finished resin can be devastating. These abnormal stmctures have weakened carbon—chlorine bonds and are more susceptible to certain displacement reactions than are the normal PVC carbon—chlorine bonds. Carboxylate and mercaptide salts of certain metals, particularly organotin, zinc, cadmium, and antimony, attack these labile chlorine sites and replace them with a more thermally stable C—O or C—S bound ligand. These electrophilic metal centers can readily coordinate with the electronegative polarized chlorine atoms found at sites similar to stmctures (3—6). [Pg.546]

Xeaoa difluoride behaves as a fluoride ioa doaor toward many metal pentafluorides to form complex salts containing the XeF" and Xe2F" 2 cations (10). In reactions with the pentafluorides of arsenic, antimony, and mthenium, for example, it forms the salts Xe2F" 2AsF(, [21308-45-2], XeF" AsF(, [26024-71-5], [12528-47-1], XeF+Sbp-g [36539-18-1], [17679-45-7], [15364-10-0], [36539-19-2], [26297-25-6],... [Pg.23]

For the production of tartar emetic (antimony potassium tartrate [28300-74-5]), potassium bitartrate [868-14 ] and antimony oxide, Sb202, are added simultaneously to water in a stainless-steel reactor. The reaction mixture is diluted, filtered, and collected in jacketed granulators where crystallization takes place after cooling. Centrihiging, washing, and drying complete the process. [Pg.526]

The pyrometaHurgical processes, ie, furnace-kettle refining, are based on (/) the higher oxidation potentials of the impurities such as antimony, arsenic, and tin, ia comparison to that of lead and (2) the formation of iasoluble iatermetaUic compounds by reaction of metallic reagents such as 2iac with the impurities, gold, silver and copper, and calcium and magnesium with bismuth (Fig. 12). [Pg.43]

Rea.ctivity ofLea.d—Ca.lcium Alloys. Precise control of the calcium content is required to control the grain stmcture, corrosion resistance, and mechanical properties of lead—calcium alloys. Calcium reacts readily with air and other elements such as antimony, arsenic, and sulfur to produce oxides or intermetaUic compounds (see Calciumand calciumalloys). In these reactions, calcium is lost and suspended soHds reduce fluidity and castibiUty. The very thin grids that are required for automotive batteries are difficult to cast from lead—calcium alloys. [Pg.59]

A rapid method to determine the calcium content of lead alloys is a Hquid-metal titration using lead—antimony (1%) (9). The end point is indicated by a gray oxide film pattern on the surface of a sohdifted sample of the metal when observed at a 45° angle to a light source. The basis for the titration is the reaction between calcium and antimony. The percentage of calcium in the sample can be calculated from the amount of antimony used. If additional calcium is needed in the alloy, the melt is sweetened with a lead—calcium (1 wt %) master alloy. [Pg.59]

Lead—antimony or lead—arsenic ahoys must not be mixed with lead—calcium (aluminum) ahoys in the molten state. Addition of lead—calcium—aluminum ahoys to lead—antimony ahoys results in reaction of calcium or aluminum with the antimony and arsenic to form arsenides and antimonides. The dross containing the arsenides and antimonides floats to the surface of the molten lead ahoy and may generate poisonous arsine or stibine if it becomes wet. Care must be taken to prevent mixing of calcium and antimony ahoys and to ensure proper handling of drosses. [Pg.62]

The standard electrode potential for zinc reduction (—0.763 V) is much more cathodic than the potential for hydrogen evolution, and the two reactions proceed simultaneously, thereby reducing the electrochemical yield of zinc. Current efficiencies slightly above 90% are achieved in modem plants by careful purification of the electrolyte to bring the concentration of the most harmful impurities, eg, germanium, arsenic, and antimony, down to ca 0.01 mg/L. Addition of organic surfactants (qv) like glue, improves the quaUty of the deposit and the current efficiency. [Pg.174]

MAA and MMA may also be prepared via the ammoxidation of isobutylene to give meth acrylonitrile as the key intermediate. A mixture of isobutjiene, ammonia, and air are passed over a complex mixed metal oxide catalyst at elevated temperatures to give a 70—80% yield of methacrylonitrile. Suitable catalysts often include mixtures of molybdenum, bismuth, iron, and antimony, in addition to a noble metal (131—133). The meth acrylonitrile formed may then be hydrolyzed to methacrjiamide by treatment with one equivalent of sulfuric acid. The methacrjiamide can be esterified to MMA or hydrolyzed to MAA under conditions similar to those employed in the ACH process. The relatively modest yields obtainable in the ammoxidation reaction and the generation of a considerable acid waste stream combine to make this process economically less desirable than the ACH or C-4 oxidation to methacrolein processes. [Pg.253]

Nitric acid reacts with all metals except gold, iridium, platinum, rhodium, tantalum, titanium, and certain alloys. It reacts violentiy with sodium and potassium to produce nitrogen. Most metals are converted iato nitrates arsenic, antimony, and tin form oxides. Chrome, iron, and aluminum readily dissolve ia dilute nitric acid but with concentrated acid form a metal oxide layer that passivates the metal, ie, prevents further reaction. [Pg.39]


See other pages where Antimony, reactions is mentioned: [Pg.81]    [Pg.10]    [Pg.81]    [Pg.10]    [Pg.336]    [Pg.590]    [Pg.1002]    [Pg.51]    [Pg.456]    [Pg.456]    [Pg.467]    [Pg.150]    [Pg.150]    [Pg.150]    [Pg.150]    [Pg.153]    [Pg.268]    [Pg.285]    [Pg.298]    [Pg.330]    [Pg.164]    [Pg.281]    [Pg.305]    [Pg.488]    [Pg.8]    [Pg.70]   
See also in sourсe #XX -- [ Pg.210 , Pg.211 , Pg.212 ]

See also in sourсe #XX -- [ Pg.210 , Pg.211 , Pg.212 ]

See also in sourсe #XX -- [ Pg.80 ]

See also in sourсe #XX -- [ Pg.394 ]

See also in sourсe #XX -- [ Pg.443 ]




SEARCH



Antimony Fluoride Friedel-Crafts reaction

Antimony chloride reaction with, phosgene

Antimony compounds, crotyltype III reactions with aldehydes

Antimony compounds, reaction

Antimony doping reactions

Antimony fluoride reaction with

Antimony fluoride reaction with, phosgene

Antimony fluorides, reaction with organic

Antimony fluorides, reaction with organic halides

Antimony halogen reaction

Antimony hydrides reactions with

Antimony ions, reactions

Antimony oxide reaction with, phosgene

Antimony pentachloride Friedel-Crafts reaction

Antimony pentachloride reaction with alkenes

Antimony pentachloride, reaction with

Antimony pentafluoride reactions

Antimony reaction with chlorine

Antimony reaction with iodine

Antimony reaction with, phosgene

Antimony reactions with

Antimony redox reactions

Antimony trifluoride, reactions

Antimony trihalides reactions

Antimony, elemental reactions with

Antimony, reaction with alkyl halides

Antimony-nitrogen bonds reactions with

Antimony—carbon bonds reactions with

Antimony—hydrogen bonds reactions with

Antimony—oxygen bonds reactions with

Antimony—phosphorus bonds reactions with

Antimony—silicon bonds reactions with

Antimony—sulfur bonds reactions with

Reaction at a Phosphorus, Arsenic, or Antimony Atom

Reaction with antimony chloride

Reaction with antimony compounds

Reaction with antimony dioxide chloride

Reaction with antimony oxide

Reaction with antimony sulfide

Reactions with Sulfur, Boron, Carbon, Phosphorus, Arsenic, Antimony, and Bismuth

Reactions with antimony halides

© 2024 chempedia.info