Acrylates hydroxy-ether

Emulsion breakers are made from acrylic acid or methacrylic acid copolymerized with hydrophilic monomers [148]. The acid groups of acrylic acid and methacrylic acid are oxalkylated by a mixture of polyglycols and polyglycol ethers to provide free hydroxy groups on the molecule. The copolymers are made by a conventional method, for example, by free radical copolymerization in solution, emulsion, or suspension. The oxalkylation is performed in the presence of an acid catalyst, the acid being neutralized by an amine when the reaction is complete. 

However, most asymmetric 1,3-dipolar cycloaddition reactions of nitrile oxides with alkenes are carried out without Lewis acids as catalysts using either chiral alkenes or chiral auxiliary compounds (with achiral alkenes). Diverse chiral alkenes are in use, such as camphor-derived chiral N-acryloylhydrazide (195), C2-symmetric l,3-diacryloyl-2,2-dimethyl-4,5-diphenylimidazolidine, chiral 3-acryloyl-2,2-dimethyl-4-phenyloxazolidine (196, 197), sugar-based ethenyl ethers (198), acrylic esters (199, 200), C-bonded vinyl-substituted sugar (201), chirally modified vinylboronic ester derived from D-( + )-mannitol (202), (l/ )-menthyl vinyl ether (203), chiral derivatives of vinylacetic acid (204), ( )-l-ethoxy-3-fluoroalkyl-3-hydroxy-4-(4-methylphenylsulfinyl)but-1 -enes (205), enantiopure Y-oxygenated-a,P-unsaturated phenyl sulfones (206), chiral (a-oxyallyl)silanes (207), and (S )-but-3-ene-1,2-diol derivatives (208). As a chiral auxiliary, diisopropyl (i ,i )-tartrate (209, 210) has been very popular. 

The reaction of acceptor-substituted carbene complexes with alcohols to yield ethers is a valuable alternative to other etherification reactions [1152,1209-1211], This reaction generally proceeds faster than cyclopropanation [1176], As in other transformations with electrophilic carbene complexes, the reaction conditions are mild and well-suited to base- or acid-sensitive substrates [1212], As an illustrative example, Experimental Procedure 4.2.4 describes the carbene-mediated etherification of a serine derivative. This type of substrate is very difficult to etherify under basic conditions (e.g. NaH, alkyl halide [1213]), because of an intramolecular hydrogen-bond between the nitrogen-bound hydrogen and the hydroxy group. Further, upon treatment with bases serine ethers readily eliminate alkoxide to give acrylates. With the aid of electrophilic carbene complexes, however, acceptable yields of 0-alkylated serine derivatives can be obtained. 

Types of compounds are arranged according to the following system hydrocarbons and basic heterocycles hydroxy compounds and their ethers mercapto compounds, sulfides, disulfides, sulfoxides and sulfones, sulfenic, sulfinic and sulfonic acids and their derivatives amines, hydroxylamines, hydrazines, hydrazo and azo compounds carbonyl compounds and their functional derivatives carboxylic acids and their functional derivatives and organometallics. In each chapter, halogen, nitroso, nitro, diazo and azido compounds follow the parent compounds as their substitution derivatives. More detail is indicated in the table of contents. In polyfunctional derivatives reduction of a particular function is mentioned in the place of the highest functionality. Reduction of acrylic acid, for example, is described in the chapter on acids rather than functionalized ethylene, and reduction of ethyl acetoacetate is discussed in the chapter on esters rather than in the chapter on ketones. 

HMX HMX HMX HMX HMX HMX HMX HMX HMX HMX HMX HMX HNS NTO NTO/HMX NTO/HMX NTO/HMX PETN PETN PETN PETN PETN PETN PETN PETN PETN PETN RDX RDX RDX RDX RDX RDX RDX RDX RDX RDX RDX RDX RDX TATB/HMX Cariflex (thermoplastic elastomer) Hydroxy-terminated polybutadiene (polyurethane) Hydroxy-terminated polyester Kraton (block copolymer of styrene and ethylene-butylene) Nylon (polyamide) Polyester resin-styrene Polyethylene Polyurethane Poly(vinyl) alcohol Poly(vinyl) butyral resin Teflon (polytetrafluoroethylene) Viton (fluoroelastomer) Teflon (polytetrafluoroethylene) Cariflex (block copolymer of butadiene-styrene) Cariflex (block copolymer of butadiene-styrene) Estane (polyester polyurethane copolymer) Hytemp (thermoplastic elastomer) Butyl rubber with acetyl tributylcitrate Epoxy resin-diethylenetriamine Kraton (block copolymer of styrene and ethylene-butylene) Latex with bis-(2-ethylhexyl adipate) Nylon (polyamide) Polyester and styrene copolymer Poly(ethyl acrylate) with dibutyl phthalate Silicone rubber Viton (fluoroelastomer) Teflon (polytetrafluoroethylene) Epoxy ether Exon (polychlorotrifluoroethylene/vinylidine chloride) Hydroxy-terminated polybutadiene (polyurethane) Kel-F (polychlorotrifluoroethylene) Nylon (polyamide) Nylon and aluminium Nitro-fluoroalkyl epoxides Polyacrylate and paraffin Polyamide resin Polyisobutylene/Teflon (polytetrafluoroethylene) Polyester Polystyrene Teflon (polytetrafluoroethylene) Kraton (block copolymer of styrene and ethylene-butylene)... 

Several new syntheses of thiazoles from thioureas have been developed in recent years. Werbel95 was able to prepare 2-aminothiazoles by reaction of thioureas with bis(/3-chloroethyl) ether. 1,3-Disubstituted thioureas, however, yielded disubstituted 4-thiazolines. In a German patent, Rcisinger96 reported that 2-aminothiazole was formed in 88% yield from thiourea and vinyl acetate in the presence of sulfuryl chloride. A method for the preparation of the 4-hydroxy-2-amino-thiazole (47), which probably exists in the tautomer shown, has been developed by Delaby et al.97 via the reaction of thiourea with jS-acyl-acrylic acid or its esters. Zbiral98 has observed that acylvinylphos-... 

The radical reductive cyclisation of diesters to acyloins (see also Section 5.9.1, p. 628) is an important method of synthesis for ring sizes from four-membered upwards. The example selected here is 2-hydroxy-3-methylcyclopent-2-enone ( corylone ) (29) (Expt 7.10), which is an important perfumery and flavouring material.53 In the first step (i), methyl acrylate is converted into its dimer with tris(cyclohexyl)phosphine in pyridine solution.5b Step (ii) is the protection of the double bond by conversion into the dimethylamino adduct. The acyloin reaction is step (iii), and the product is trapped as its bis(trimethylsilyl)ether. Finally, in step (iv), the protecting dimethylamino and trimethylsilyl groups are removed by passage down a column of silica gel. 

Hydroxy-trart.v-cinnamic acid, 3130 /V-Hydroxymethyl acrylamide, 1566 Methacrylic acid, 1525 f Methyl acrylate, 1526 f Methyl methacrylate Propionaldehyde, 1909 f Methyl vinyl ether Acids, 1217... 

PB PBI PBMA PBO PBT(H) PBTP PC PCHMA PCTFE PDAP PDMS PE PEHD PELD PEMD PEC PEEK PEG PEI PEK PEN PEO PES PET PF PI PIB PMA PMMA PMI PMP POB POM PP PPE PPP PPPE PPQ PPS PPSU PS PSU PTFE PTMT PU PUR Poly(n.butylene) Poly(benzimidazole) Poly(n.butyl methacrylate) Poly(benzoxazole) Poly(benzthiazole) Poly(butylene glycol terephthalate) Polycarbonate Poly(cyclohexyl methacrylate) Poly(chloro-trifluoro ethylene) Poly(diallyl phthalate) Poly(dimethyl siloxane) Polyethylene High density polyethylene Low density polyethylene Medium density polyethylene Chlorinated polyethylene Poly-ether-ether ketone poly(ethylene glycol) Poly-ether-imide Poly-ether ketone Poly(ethylene-2,6-naphthalene dicarboxylate) Poly(ethylene oxide) Poly-ether sulfone Poly(ethylene terephthalate) Phenol formaldehyde resin Polyimide Polyisobutylene Poly(methyl acrylate) Poly(methyl methacrylate) Poly(methacryl imide) Poly(methylpentene) Poly(hydroxy-benzoate) Polyoxymethylene = polyacetal = polyformaldehyde Polypropylene Poly (2,6-dimethyl-l,4-phenylene ether) = Poly(phenylene oxide) Polyp araphenylene Poly(2,6-diphenyl-l,4-phenylene ether) Poly(phenyl quinoxaline) Polyphenylene sulfide, polysulfide Polyphenylene sulfone Polystyrene Polysulfone Poly(tetrafluoroethylene) Poly(tetramethylene terephthalate) Polyurethane Polyurethane rubber... 

A mixture of N-(2 -bromoallyl)-3-hydroxy-4-(p-tolyl) pyridinium bromide hydro-quinone (lOOmg) dissolved in ethyl acrylate were heated 1.5 hours, (27mmol), 7.5 ml TEA and cooled, and diluted with 200 ml diethyl ether. The suspension was filtered and the product isolated by chromatography using hexanes/EtOAc, 4 1, in 52% yield. H-NMR data supplied. 

In many cases the organic to be dehydrated (e.g., acetic acid) attacks the ether linkage in the PVA membrane. Indeed, the PVA membrane has very limited fife in the presence of most acids. Ray et al. [14] used the concept of copolymer membranes to dehydrate acetic acid over the entire range of concentration from 0% to 100%. These investigators prepared copolymers of acrylonitrile (AN) with different hydrophUic monomers like hydroxy ethyl methacrylate, acrylic acid, methacrylic acid, and itaconic acid. These copolymers have carbon-carbon bonds, which unlike the ether linkage in the cross-hnked PVA membrane are stable to the attack by carboxyhc acids. The acrylonitrile part is not sufficiently hydrophihc but imparts mechanical strength while the other monomers improve the hydrophilicity. The overall result is an efficient yet stable membrane. Variation of the ratio of AN to (the other) monomer allows freedom of adjusting the hydrophUicity of the membrane to achieve certain... 

Materials. VEC was prepared by the catalyzed addition of CO2 to 3,4-epoxy-l-butene using conditions typical of that used industrially [77], then purified by vacuum distillation. Other raw materials were used as received without any additional purification. Mixed xylenes, vinyl acetate (VA), butyl acrylate (BA), butyl methacrylate (BMA), methyl methacrylate (MMA), styrene (St), and t-butyl hydroperoxide were obtained from Aldrich Chemical Company. Lupersol 575 (t-amyl peroxy (2-ethylhexanoate)) was supplied by Elf Atochem. Vazo 67 (2,2 -azobis(2-methylbutyronitrile)) was obtained from DuPont Chemical Company. Vinyl pivalate (NE05), vinyl 2-ethylhexanoate (V2EH), Tergitol NP-40 (non-ionic surfactant) and QP-300 (hydroxy ethyl cellulose) were obtained from Union Carbide Coq)oration. Aerosol OT-75 (surfactant) was obtained from Cytec. Sodium formaldehyde sulfoxylate was obtained from Henkel Corporation. Ethyl 3-ethoxy propionate (EEP), propylene glycol monomethyl ether (PM) and PM acetate (PM Ac) are Eastman Chemical Company products. 

The ether linkage formed during the crosslinking reaction of amino formaldehyde resins with hydroxy functional polymers is sensitive to acid hydrolysis. [2.197] Exposure to acid rain is sufficient to damage high solids acrylic/melamine coatings. The use of either active CH [2.198] or NH functional polymers [2.199] creates linkages... 

The prepolymers can be different types of materials. They must, however, contain residual unsaturation in order to react and crosslink with the monomers. Examples of such materials may be polyurethane acrylates that are prepared from urethane prepolymers. The excess isocyanate groups are treated with hydroxyethyl or hydroxypropyl acrylates. Other prepolymers with terminal and/or pendant hydroxy groups are also often esterified with acrylic acid. The oligomers might also be bisphenol A diglycidyl ethers prereacted with acrylic acid to form terminal acrylate groups. An example of these would be ... 

---