Quinones hydro

Phenol, 0-, m- and p-cresol, catechol, resorcinol, hydro-quinone (and other nuclear substituted phenols), 1 - and 2-naphthoi... 

Reduction, (a) By sulphurous acid. Benzoquinone, /> toluquinone, 1,2-naphthoquinone are readily reduced by SOj ultimately to the dihydroxy-compound. Thus benzoquinone gives colourless hydro-quinone or quinol, />-C2H4fOH)2. 

Semi- carbazone Oxime Hydro- quinone DIacetate of hydro-quinone Thiele acetylation product Other Derivatives... 

Place 25 g. of methyl methacrylate polymer (G.B. Diakon (powder). Perspex (sheet) U.S.A. Lucite, Plexiglass) in a 100 ml. Claisen flask, attach an efficient condenser e.g., of the double smface type) and distil with a small luminous flame move the flame to and fro around the sides of the flask. At about 300° the polymer softens and undergoes rapid depolymerisation to the monomer, methyl methacrylate, which distils over into the receiver. Continue the distillation until only a small black residue (3-4 g.) remains. Redistil the hquid it passes over at 100-110°, mainly at 100-102°. The yield of methyl methacrylate (monomer) is 20 g. If the monomer is to be kept for any period, add 0 -1 g. of hydro quinone to act as a stabiUser or inhibitor of polymerisation. 

One of the problems with all the current phenol conversions is that a certain amount of other phenols, such as resorcinol and hydro-quinone, will be formed along with the catechol (don t ask). These species are very hard to separate from the catechol because they are all so similar. Aside of carefully monitored fractional distillation there are some vague strategies which can be found in the Chemical Abstract references 116-118. 

N,1S7-diphenyl-/)-phenyl-enedia 18 16 2 [74-31-7] white sohd 146 from hydro quinone and 10.38... 

The synthetic procedure described is based on that reported earlier for the synthesis on a smaller scale of anthracene, benz[a]anthracene, chrysene, dibenz[a,c]anthracene, and phenanthrene in excellent yields from the corresponding quinones. Although reduction of quinones with HI and phosphorus was described in the older literature, relatively drastic conditions were employed and mixtures of polyhydrogenated derivatives were the principal products. The relatively milder experimental procedure employed herein appears generally applicable to the reduction of both ortho- and para-quinones directly to the fully aromatic polycyclic arenes. The method is apparently inapplicable to quinones having an olefinic bond, such as o-naphthoquinone, since an analogous reaction of the latter provides a product of undetermined structure (unpublished result). As shown previously, phenols and hydro-quinones, implicated as intermediates in the reduction of quinones by HI, can also be smoothly deoxygenated to fully aromatic polycyclic arenes under conditions similar to those described herein. 

The methanol-methyl acrylate azeotrope contains about 45% methyl acrylate, which can be recovered by washing out the methanol with a large volume of water or brine the acrylate is purified by, drying and distilling. An inhibitor, such as hydro-quinone, should always be added to any acrylic ester before attempting to distil it, and, unless it is stored in a refrigerator, the distilled ester should not be kept more than a few hours without the addition of a small amount (0.1-1.0%) of an inhibitor. 

Polymerizations using trialkylborons are not slowed as mueh as is normal by the presenee of eonventional inhibitors sueh as p-phenylenediamine, hydro-quinone, benzoquinone, phenothiazine or others [74]. This has been attributed to... 

The dissolved hydrogen sulfide is oxidized to form a mixture of elemental sulfur and hydro-quinone. The solution is injected with air or oxygen to oxidize the hydro-quinone back to quinone. The solution is then filtered or centrifuged to remove the sulfur and the quinone is then reused. 

This derivative is prepared from an A-protected amino acid and the anthryl-methyl alcohol in the presence of DCC/hydroxybenzotriazole. It can also be prepared from 2-(bromomethyl)-9,10-anthraquinone (Cs2C03). It is stable to moderately acidic conditions (e.g., CF3COOH, 20°, 1 h HBr/HOAc, t,/, = 65 h HCI/CH2CI2, 20°, 1 h) Cleavage is effected by reduction of the quinone to the hydroquinone i in the latter, electron release from the -OH group of the hydro-quinone results in facile cleavage of the methylene-carboxylate bond. 

In this series of amides, hydrolysis or aminolysis of a simple ester, cleavage of a silyl groups a cis/trans isomerization, or reduction of a quinone to a hydro-quinone exposes an alcohol that then induces deprotection by intramolecular addition to the amide carbonyl. 

The main product of the Elbs reaction is the 1,4-dihydroxybenzene (hydro-quinone). If the para position is already occupied by a substituent, the reaction occurs at an ortho position, leading to a catechol derivative although the yields are not as good as for a hydroquinone. Better yields of catechols 7 can be obtained by a copper-catalyzed oxidation of phenols with molecular oxygen ... 

Let us explicitly consider the two important cases of hydro-quinone clathrates and gas hydrates. 

Fig. 4. Cross section through the P-T-x diagram of the system hydro -quinone-argon at 60°C (cf. Fig. 3).

Carbon dioxide, clathrate in hydro-quinone, 7, 11 as a "hilfsgas, 18 hydrate, 3... 

The anthracyclines represent a broad family of antibiotics that exhibit activity in numerous tumors. The first anthracyclines, doxorubicin (DOX) and dau-notubicin (DNR), were isolated from Streptomyces var peucetius they were shown to be composed of a tetracyclic ring system with adjacent quinone-hydro-quinone moieties, a short side chain with a carbonyl group, and an aminosugar bound to the C-7 of the four-ring system. DOX and DNR only differed in the side chain terminus (-CH2OH in DOX vs. -CH3 in DNR). Second generation anthracyclines, like epitubicin (EPI) and idatubicin (IDA), were obtained after minor chemical modifications of DOX or DNR, respectively (Fig- 1). 

Methyl Acrylate CH2=CHCOOCH3 Non-inhibitors such as Biphenyl, Bibenzyl, Tri-phenyl, etc Methyl Acrylate Vap plus air > Ambient > 120 Inhibitor—H ydro quino ne or Methyl Ether of Hydro-quinone 10-20ppm. Store Store below 10° no inert atmosphere. No sparks 18.58-18.8 463 Self polymerizing above ambient press temp accelerates polymerization... 

Methyl Methacrylate CH2=C(CH3)COOCH3 Impure Methyl-Methacrylate Vap in Air 2.1 to 12.5% > Ambient > 110 Inhibitor-Hydroquinone or Methyl Ether of Hydro-quinone. Shield from light avoid sparks. Store in cool place 13.3-13.8 421 Self-polymerizing initiated by visible light at 20 to 40°... 

Cyclopentadiene was prepared2 by heating dicyclopentadiene (purchased from Eastman Organic Chemicals) and a pinch of hydro-quinone (1,4-benzenediol) under a column of glass helices or a Vigreux column at 175° and collecting the distillate in a receiver cooled with a 2-propanol-dry ice bath. The monomer was dried over Linde 4A Molecular Sieves at —20° and could be stored at this temperature for several weeks without excessive dimerization. 

Poly(ether ether ketone), known as PEEK, is a crystalline high-temperature thermoplastic. It is produced by a step (condensation) process (see Chapter 2) in which 4,4-difluorobenzophenone is reacted with the anion of hydro-quinone. This reaction is carried out in a high boiling point polar solvent, such as A -cyclohexyl-2-pyrrolidone (1.13). 

Rieske proteins are constituents of the be complexes that are hydro-quinone-oxidizing multisubunit membrane proteins. All be complexes, that is, bci complexes in mitochondria and bacteria, b f complexes in chloroplasts, and corresponding complexes in menaquinone-oxidizing bacteria, contain three subunits cytochrome b (cytochrome 6e in b f complexes), cytochrome Ci (cytochrome f in b(,f complexes), and the Rieske iron sulfur protein. Cytochrome 6 is a membrane protein, whereas the Rieske protein, cytochrome Ci, and cytochrome f consist of water-soluble catalytic domains that are bound to cytochrome b through a membrane anchor. In Rieske proteins, the membrane anchor can be identified as an N-terminal hydrophobic sequence (13). 

---