Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

The reaction medium

Generally, the stereochemistry of the products obtained on hydrogenation of isolated olefins is not affected by the nature of the solvent. However, an example of product dependence on the nature of the reaction medium which [Pg.113]

2 adsorption (11) is expected to predominate in aprotic solvents of low dielectric constant while 1,4 adsorption (12) should be favored in higlily polar nonhydroxylic media. With (9), 1,2 adsorption leads to nearly equal amounts of the isomeric products but 1,4 adsorption gives predominantly the m-product. In protic solvents of high polarity, 1,4 adsorption is hindered because of carbonyl group solvation or hemiketal formation and, therefore, products are formed by way of a 1,2 adsorption process. In less polar hydroxylic solvents solvation does not occur and the hydrogenation proceeds by way of a 1,4 addition process. The effect of solvent on the product distribution found on hydrogenation of A -3-keto steroids is also explained by these concepts. [Pg.116]

It has been suggested that in basic mixtures the reaction occurs by hydrogenation of the initially formed enolate anion, e.g. (13) which is irreversibly adsorbed on the catalyst surface (14). [Pg.116]

Addition of hydride ion from the catalyst gives the adsorbed dianion (15). The reaction is completed and product stereochemistry determined by protonation of these species from the solution prior to or concurrent with desorption. With the heteroannular enolate, (13a), both cis and trans adsorption can occur with nearly equal facility. When an angular methyl group is present trans adsorption (14b) predominates. Protonation of the latter species from the solution gives the cis product. Since the heteroannular enolate is formed by the reaction of A -3-keto steroids with strong base this mechanism satisfactorily accounts for the almost exclusive formation of the isomer on hydrogenation of these steroids in basic media. The optimum concentration of hydroxide ion in this reaction is about two to three times that of the substrate. [Pg.116]

In very dilute base or, preferably, in the presence of weak bases, the homoannular enolate (16) is formed which can be adsorbed in either a cis (17) or a trans (18) manner. In this case the presence of a methyl group results in a slight favoring of trans adsorption, thus leading to the formation of a slight excess of the m-product as is observed on hydrogeneration of A -3-keto steroids in the presence of triethylamine.  [Pg.116]


The driving force is generally the insolubility of one of the products in the reaction medium or the volatility of one of the products. [Pg.257]

The commercial product, m.p. 53-55°, may be used. Alternatively the methyl -naphthyl ketone may be prepared from naphthalene as described in Section IV,136. The Friedel - Crafts reaction in nitrobenzene solution yields about 90 per cent, of the p-ketone and 10 per cent, of the a-ketone in carbon disulphide solution at — 15°, the proportions ore 65 per cent, of the a- and 35 per cent, of the p-isomer. With chlorobenzene ns the reaction medium, a high proportion of the a-ketone is also formed. Separation of the liquid a-isomer from the solid p-isomer in Such mixtures (which remain liquid at the ordinary temp>erature) is readily effected through the picrates the picrate of the liquid a-aceto compound is less soluble and the higher melting. [Pg.767]

Thus benzoic anhydride and o chlorobenzoic anhydride (m.p. 79°) can bo readily prepared by this method (compare n-Heptoic anhydride, Section 111,91). It is sometimes convenient to use pyridine as the reaction medium. [Pg.794]

Hydrogenations with coppcr-chromium oxide catalyst are usually carried out in the liquid phase in stainless steel autoclaves at pressures up to 5000-6000 lb. per square inch. A solvent is not usually necessary for hydrogenation of an ester at 250° since the original ester and the alcohol or glycol produced serve as the reaction medium. However, when dealing with small quantities and also at temperatures below 200° a solvent is desirable this may be methyl alcohol, ethyi alcohol, dioxan or methylcyc/ohexane. [Pg.872]

The slow oxidation of primary alcohols, particularly MeOH, is utilized for the oxidation of allylic or secondary alcohols with allyl methyl carbonate without forming carbonates of the alcohols to be oxidized. Allyl methyl carbonate (564) forms 7r-allylpalladium methoxide, then exchange of the methoxide with a secondary or allylic alcohol 563 present in the reaction medium takes place to form the 7r-allylpalladium alkoxide 565, which undergoes elimination of j3-hydrogen to give the ketone or aldehyde 566. The lactol 567 was oxidized selectively with diallyl carbonate to the lactone 568 without attacking the secondary alcohol in the synthesis of echinosporin[360]. [Pg.366]

Anomalous Fischer cyclizations are observed with certain c-substituted aryl-hydrazones, especially 2-alkoxy derivatives[l]. The products which are formed can generally be accounted for by an intermediate which w ould be formed by (ip50-substitution during the sigmatropic rearrangement step. Nucleophiles from the reaction medium, e.g. Cl or the solvent, are introduced at the 5-and/or 6-position of the indole ring. Even carbon nucleophiles, e.g. ethyl acetoacelate, can be incorporated if added to the reaction solution[2]. The use of 2-tosyloxy or 2-trifluoromethanesulfonyloxy derivatives has been found to avoid this complication and has proved useful in the preparation of 7-oxygen-ated indoles[3]. [Pg.64]

Isopropylidene and benzylidene hydrazones of selenazole unsubstituted in the 5-position react with p-nitrosodimethylanilines or p-nitrosodiethyl-anilines when heated in organic solvents in the presence of acetic acid or pyridine (49). Highly colored crystalline 2-hydrazono-5-(p-dialkylamino-phenylimino)selenazoles are recovered from the reaction medium (Table X-10). [Pg.250]

Selenium heterocycles receive far less mention in the literature than do such homologs as oxazole, thiazole, or imidazole. In fact, preparative methods of selenium heterocycles are much more limited than for the other series, mainly because of manipulatory difficulties arising from the toxicity of selenium (hydrogen selenide is even more toxic) that can produce severe damage to the skin, lungs, kidneys, and eyes. Another source of difficulty is the reactivity of the heterocycle itself, which can easily undergo fission, depending on the reaction medium and the nature of the substituents. [Pg.275]

In general ketones are more stable than their enol precursors and are the products actually isolated when alkynes undergo acid catalyzed hydration The standard method for alkyne hydration employs aqueous sulfuric acid as the reaction medium and mer cury(II) sulfate or mercury(II) oxide as a catalyst... [Pg.380]

The reaction medium plays a very important role in all ionic polymerizations. Likewise, the nature of the ionic partner to the active center-called the counterion or gegenion-has a large effect also. This is true because the nature of the counterion, the polarity of the solvent, and the possibility of specific solvent-ion interactions determines the average distance of separation between the ions in solution. It is not difficult to visualize a whole spectrum of possibilities, from completely separated ions to an ion pair of partially solvated ions to an ion pair of unsolvated ions. The distance between the centers of the ions is different in... [Pg.404]

The electron-releasing R group helps stabilize this cation. As with anionic polymerization, the separation of the ions and hence the ease of monomer insertion depends on the reaction medium. The propagation reaction may be written as... [Pg.412]

Under acidic conditions, furfuryl alcohol polymerizes to black polymers, which eventually become crosslinked and insoluble in the reaction medium. The reaction can be very violent and extreme care must be taken when furfuryl alcohol is mixed with any strong Lewis acid or Brn nstad acid. Copolymer resins are formed with phenoHc compounds, formaldehyde and/or other aldehydes. In dilute aqueous acid, the predominant reaction is a ring opening hydrolysis to form levulinic acid [123-76-2] (52). In acidic alcohoHc media, levulinic esters are formed. The mechanism for this unusual reaction in which the hydroxymethyl group of furfuryl alcohol is converted to the terminal methyl group of levulinic acid has recendy been elucidated (53). [Pg.79]

Unlike DNQ—novolac resists, CA-resist imaging characteristics are determined to a significant extent by thermally activated bimolecular chemistry taking place during postexposure processing. Since the polymer serves here as the reaction medium, its properties and state induence the course and... [Pg.130]

The amide formation reaction (highlighted by the circle) leads to the production of a hydrogen-bonded dimer (ZZ) of the reaction product Z with the template Z. The dimer is in thermodynamic equilibrium with free template in the reaction medium. [Pg.211]

The reaction rate is increased by using an entraining agent such as hexane, benzene, toluene, or cyclohexane, depending on the reactant alcohol, to remove the water formed. The concentration of water in the reaction medium can be measured, either by means of the Kad-Eischer reagent, or automatically by specific conductance and used as a control of the rate. The specific electrical conductance of acetic acid containing small amounts of water is given in Table 6. [Pg.66]

When initiator is first added the reaction medium remains clear while particles 10 to 20 nm in diameter are formed. As the reaction proceeds the particle size increases, giving the reaction medium a white milky appearance. When a thermal initiator, such as AIBN or benzoyl peroxide, is used the reaction is autocatalytic. This contrasts sharply with normal homogeneous polymerizations in which the rate of polymerization decreases monotonicaHy with time. Studies show that three propagation reactions occur simultaneously to account for the anomalous auto acceleration (17). These are chain growth in the continuous monomer phase chain growth of radicals that have precipitated from solution onto the particle surface and chain growth of radicals within the polymer particles (13,18). [Pg.278]

Aqueous media, such as emulsion, suspension, and dispersion polymerization, are by far the most widely used in the acryUc fiber industry. Water acts as a convenient heat-transfer and cooling medium and the polymer is easily recovered by filtration or centrifugation. Fiber producers that use aqueous solutions of thiocyanate or zinc chloride as the solvent for the polymer have an additional benefit. In such cases the reaction medium can be converted directiy to dope to save the costs of polymer recovery. Aqueous emulsions are less common. This type of process is used primarily for modacryUc compositions, such as Dynel. Even in such processes the emulsifier is used at very low levels, giving a polymerization medium with characteristics of both a suspension and a tme emulsion. [Pg.279]

Direct Fluorination. This is a more recently developed method for the synthesis of perfluorinated compounds. In this process, fluorine gas is passed through a solution or suspension of the reactant in a nonreactive solvent such as trichlorotrifluoroethane (CFC-113). Sodium fluoride may also be present in the reaction medium to remove the coproduct hydrogen fluoride. There has been enormous interest in this area since the early 1980s resulting in numerous journal pubHcations and patents (7—9) (see Fluorine compounds, organic-direct fluorination). Direct fluorination is especially useful for the preparation of perfluoroethers. [Pg.298]

Purely aqueous polymerization systems give copolymers that are not wetted by the reaction medium. The products agglomerate and plug valves, nozzles, and tubing, and adhere to stirrer blades, thermocouples, or reactor walls. These problems do not occur in organic media or mixtures of these with water. [Pg.365]

Tetiafluoioethylene—peifluoiopiopyl vinyl ethei copolymeis [26655-00-5] aie made in aqueous (1,2) oi nonaqueous media (3). In aqueous copolymerizations water-soluble initiators and a perfluorinated emulsifying agent are used. Molecular weight and molecular weight distribution are controlled by a chain-transfer agent. Sometimes a second phase is added to the reaction medium to improve the distribution of the vinyl ether in the poljmier (11) a buffer is also added. [Pg.374]

A AlI lation. 1-Substitution is favored when the indole ring is deprotonated and the reaction medium promotes the nucleophilicity of the resulting indole anion. Conditions which typically result in A/-alkylation are generation of the sodium salt by sodium amide in Hquid ammonia, use of sodium hydride or a similar strong base in /V, /V- dim ethyl form am i de or dimethyl sulfoxide, or the use of phase-transfer conditions. [Pg.85]

Another concentration method involves passing an inert gas such as N2 or CO2 through the reaction medium (12). As the gas passes through, it becomes humidified and carries captured water with it. Most of the energy required for the gas humidification comes from the heat of reaction. An advantage is that expensive drying equipment is not needed. Also, the sulfuric acid mist formed in typical concentrators is minimized. Du Pont uses a similar process in its nitrobenzene production faciUty. [Pg.65]

The in situ process is simpler because it requires less material handling (35) however, this process has been used only for resole resins. When phenol is used, the reaction system is initially one-phase alkylated phenols and bisphenol A present special problems. As the reaction with formaldehyde progresses at 80—100°C, the resin becomes water-insoluble and phase separation takes place. Catalysts such as hexa produce an early phase separation, whereas NaOH-based resins retain water solubiUty to a higher molecular weight. If the reaction medium contains a protective coUoid at phase separation, a resin-in-water dispersion forms. Alternatively, the protective coUoid can be added later in the reaction sequence, in which case the reaction mass may temporarily be a water-in-resin dispersion. The protective coUoid serves to assist particle formation and stabUizes the final particles against coalescence. Some examples of protective coUoids are poly(vinyl alcohol), gum arabic, and hydroxyethjlceUulose. [Pg.298]

The residue, which contains Ir, Ru, and Os, is fused with sodium peroxide at 500°C, forming soluble sodium mthenate and sodium osmate. Reaction of these salts with chlorine produces volatile tetroxides, which are separated from the reaction medium by distillation and absorbed into hydrochloric acid. The osmium can then be separated from the mthenium by boiling the chloride solution with nitric acid. Osmium forms volatile osmium tetroxide mthenium remains in solution. Ruthenium and osmium can thus be separately purified and reduced to give the metals. [Pg.168]

Alkali moderation of supported precious metal catalysts reduces secondary amine formation and generation of ammonia (18). Ammonia in the reaction medium inhibits Rh, but not Ru precious metal catalyst. More secondary amine results from use of more polar protic solvents, CH OH > C2H5OH > Lithium hydroxide is the most effective alkah promoter (19), reducing secondary amine formation and hydrogenolysis. The general order of catalyst procUvity toward secondary amine formation is Pt > Pd Ru > Rh (20). Rhodium s catalyst support contribution to secondary amine formation decreases ia the order carbon > alumina > barium carbonate > barium sulfate > calcium carbonate. [Pg.209]

Siace nitroarenes are reported to be catalyst poisons (18), the concentration of DNT ia the reaction medium is kept as low as is practical with regard to production goals and catalyst usage. The pubHshed kinetic studies are of Htde iadustrial value siace they describe batch processes with high DNT catalyst ratios (18—21). The effects of important process variables, such as temperature and pressure, can only be iaferred from descriptions ia the patent Hterature. [Pg.238]

V-Trimethyl silyl diethyl amine (TMSDEA) is a stroagly basic silylatiag reageat and is particulady usehil for derivatiziag low molecular weight acids. The reaction by-product, diethylamine, is volatile enough to be easily removed from the reaction medium. [Pg.70]

Liquid Ghromatography/Mass Spectrometry. Increased use of Hquid chromatography/mass spectrometry (Ic/ms) for stmctural identification and trace analysis has become apparent. Thermospray Ic/ms has been used to identify by-products in phenyl isocyanate precolumn derivatization reactions (74). Five compounds resulting from the reaction of phenyUsocyanate and the reaction medium were identified two from a reaction between phenyl isocyanate and methanol, two from the reaction between phenyl isocyanate and water, and one from the polymerisation of phenyl isocyanate. There were also two reports of derivatisation to enhance either the response or stmctural information from thermospray Ic/ms for linoleic acid hpoxygenase metabohtes (75) and for cortisol (76). [Pg.246]

The hydroformylation reaction is carried out in the Hquid phase using a metal carbonyl catalyst such as HCo(CO)4 (36), HCo(CO)2[P( -C4H2)] (37), or HRh(CO)2[P(CgH3)2]2 (38,39). The phosphine-substituted rhodium compound is the catalyst of choice for new commercial plants that can operate at 353—383 K and 0.7—2 MPa (7—20 atm) (39). The differences among the catalysts are found in their intrinsic activity, their selectivity to straight-chain product, their abiHty to isomerize the olefin feedstock and hydrogenate the product aldehyde to alcohol, and the ease with which they are separated from the reaction medium (36). [Pg.51]

Catalytic hydrogenation of the nitrile function of cyanohydrins can give amines. As in the case of ordinary nitriles, catalytic reduction of cyanohydrins can yield a mixture of primary, secondary, and tertiary amines. Addition of acid or acetic anhydride to the reaction medium minimizes formation of secondary or tertiary amines through formation of the amine salt or acetamide derivative of the primary amine. [Pg.411]

These conjugated polymers can be chemically and electrochemically reduced and reoxidized in a reversible manner. In all cases the charges on the polymer backbone must be compensated by ions from the reaction medium which are then incorporated into the polymer lattice. The rate of the doping process is dependent on the mobiHty of these charge compensating ions into and out of the polymer matrix. [Pg.40]

Amino alcohols can be resolved by a number of pathways including hydrolysis, esterification, and transesterification. For example, hydrolysis of Ai,0-diacet5l-2-amino-l-butanol with PPL followed by recrystallization results in (80a) with 95% ee (108). Hydrolysis of racemic acetates or butyrates of 2-[(aLkoxycarbonyl)amino]-l-aLkanols with PFL gives (R)-alcohol (81) with 95% ee (109). (3)-(81) can be obtained by transesterification of the racemic (81) with ethyl acetate which also serves as the reaction medium (109). [Pg.343]


See other pages where The reaction medium is mentioned: [Pg.176]    [Pg.32]    [Pg.176]    [Pg.67]    [Pg.287]    [Pg.156]    [Pg.278]    [Pg.279]    [Pg.279]    [Pg.11]    [Pg.375]    [Pg.383]    [Pg.294]    [Pg.436]    [Pg.429]    [Pg.425]    [Pg.38]    [Pg.40]    [Pg.336]   


SEARCH



Chemical reactions in the interstellar medium

High- and Medium-Throughput Screening Systems for Assaying the Enantioselectivity of Enzymatic Reactions

Influences of the Reaction Medium

Ionic liquid as the reaction medium

Mechanisms of solvolytic reactions, medium effects on the rates and

Medium, reaction

Organized Media on Photochemical Reactions, A Model for the Influence of (Ramamurthy, Weiss, and Hammond)

Solvolytic reactions, medium effects on the

Solvolytic reactions, medium effects on the rates and mechanisms

Supercritical fluids in the critical region as reaction media

The Question of Solvents Alternative Reaction Media

Water as the Reaction Medium

© 2024 chempedia.info