Methyl carbonate

The radical and ions are exceptionally stable due to resonance the free electron or charge is not localized on the methyl carbon atom but is distributed over the benzene rings. 

The full ab-initio molecular dynamics simulation revealed the insertion of ethylene into the Zr-C bond, leading to propyl formation. The dynamics simulations showed that this first step in ethylene polymerisation is extremely fast. Figure 2 shows the distance between the carbon atoms in ethylene and between an ethylene carbon and the methyl carbon, from which it follows that the insertion time is only about 170 fs. This observation suggests the absence of any significant barrier of activation at this stage of the polymerisation process, and for this catalyst. The absence or very small value of a barrier for insertion of ethylene into a bis-cyclopentadienyl titanocene or zirconocene has also been confirmed by static quantum simulations reported independently... 

Fig. 2. Time-evolution of the methyl/ethyl C-C distances for both the zirconocene and the corresponding titanocene catalyst. The two curves starting at around 3.2 A represent the distance between the methyl carbon atom and the nearest-by ethylene carbon atom in the zirconocene-ethylene and the titanocene-ethylene complex, respectively. The two curves starting at around 1.35 A reflect the ethylene internal C-C bond lengths in the two complexes.

Hydroxylysine (328) was synthesized by chemoselective reaction of (Z)-4-acet-oxy-2-butenyl methyl carbonate (325) with two different nucleophiles first with At,(9-Boc-protected hydroxylamine (326) under neutral conditions and then with methyl (diphenylmethyleneamino)acetate (327) in the presence of BSA[202]. The primary allylic amine 331 is prepared by the highly selective monoallylation of 4,4 -dimethoxybenzhydrylamine (329). Deprotection of the allylated secondary amine 330 with 80% formic acid affords the primary ally-lamine 331. The reaction was applied to the total synthesis of gabaculine 332(203]. 

Allylic carbonates are most reactive. Their carbonylation proceeds under mild conditions, namely at 50 C under 1-20 atm of CO. Facile exchange of CO2 with CO takes place[239]. The carbonylation of 2,7-octadienyl methyl carbonate (379) in MeOH affords the 3,8-nonadienoate 380 as expected, but carbonylation in AcOH produces the cyclized acid 381 and the bicyclic ketones 382 and 383 by the insertion of the internal alkene into Tr-allylpalladium before CO insertion[240] (see Section 2.11). The alkylidenesuccinate 385 is prepared in good yields by the carbonylation of the allylic carbonate 384 obtained by DABCO-mediated addition of aldehydes to acrylate. The E Z ratios are different depending on the substrates[241]. 

Another preparative method for the enone 554 is the reaction of the enol acetate 553 with allyl methyl carbonate using a bimetallic catalyst of Pd and Tin methoxide[354,358]. The enone formation is competitive with the allylation reaction (see Section 2.4.1). MeCN as a solvent and a low Pd to ligand ratio favor enone formation. Two regioisomeric steroidal dienones, 558 and 559, are prepared regioselectively from the respective dienol acetates 556 and 557 formed from the steroidal a, /3-unsaturated ketone 555. Enone formation from both silyl enol ethers and enol acetates proceeds via 7r-allylpalladium enolates as common intermediates. 

The slow oxidation of primary alcohols, particularly MeOH, is utilized for the oxidation of allylic or secondary alcohols with allyl methyl carbonate without forming carbonates of the alcohols to be oxidized. Allyl methyl carbonate (564) forms 7r-allylpalladium methoxide, then exchange of the methoxide with a secondary or allylic alcohol 563 present in the reaction medium takes place to form the 7r-allylpalladium alkoxide 565, which undergoes elimination of j3-hydrogen to give the ketone or aldehyde 566. The lactol 567 was oxidized selectively with diallyl carbonate to the lactone 568 without attacking the secondary alcohol in the synthesis of echinosporin[360]. 

Asymmetric hydrogenolysis of allylic esters with formic acid with satisfactory ee was observed[387], Geranyl methyl carbonate (594) was reduced to 570 with formic acid using l,8-bis(dimethylamino)naphthalene as a base and MOP-Phen as the best chiral ligand, achieving 85% ee. 

Carbonylation of propargylic carbonates proceeds under mild neutral conditions (50 °C, I-10 atm) using Pd(OAc)2 and Ph ,P as a catalyst, yielding the 2,3-alkadienoates 18 in good yields[9,10]. The 2.3-alkadienoates isomerize to 2,4-dienoates during the reaction depending on the solvents and reaction time. 2-Decynyl methyl carbonate is converted into methyl 2-heptyl-2,3-butadienoate (19) in 82% yield. 

In addition to alcohols, some other nucleophiles such as amines and carbon nucleophiles can be used to trap the acylpalladium intermediates. The o-viny-lidene-/j-lactam 30 is prepared by the carbonylation of the 4-benzylamino-2-alkynyl methyl carbonate derivative 29[16]. The reaction proceeds using TMPP, a cyclic phosphite, as a ligand. When the amino group is protected as the p-toluenesulfonamide, the reaction proceeds in the presence of potassium carbonate, and the f>-alkynyl-/J-lactam 31 is obtained by the isomerization of the allenyl (vinylidene) group to the less strained alkyne. 

The carbonylation of dehydrolinalyl methyl carbonate (35) at room temperature affords the cyclopentene derivative 37 formed by the ene reaction of... 

FIGURE 26 8 The distribu tion of the C label in citronellal biosynthesized from acetate in which the methyl carbon was isoto pically enriched with C... 

Reactions of the Hydroxyl Group. The hydroxyl proton of hydroxybenzaldehydes is acidic and reacts with alkahes to form salts. The lithium, sodium, potassium, and copper salts of sahcylaldehyde exist as chelates. The cobalt salt is the most simple oxygen-carrying synthetic chelate compound (33). The stabiUty constants of numerous sahcylaldehyde—metal ion coordination compounds have been measured (34). Both sahcylaldehyde and 4-hydroxybenzaldehyde are readily converted to the corresponding anisaldehyde by reaction with a methyl hahde, methyl sulfate (35—37), or methyl carbonate (38). The reaction shown produces -anisaldehyde [123-11-5] in 93.3% yield. Other ethers can also be made by the use of the appropriate reagent. 

Other Reactions. a-Nitroalkanoic acids or thek esters can be prepared (54—56) by treating nitroparaffins with magnesium methyl carbonate, or with triisopropylaluminum and carbon dioxide. These products are reduced readily to a-amino acids. 

Alkyl Methyl Carbonate ROCO2CH3 (Chart 2) Formation ... 

An ethyl carbonate, prepared and cleaved by conditions similar to those described for a methyl carbonate, was used to protect a hydroxyl group in glucose. ... 

In an early synthesis a methyl carbonate, prepared by reaction of a phenol with methyl chloroformate, was cleaved selectively in the presence of a phenyl ester. ... 

Trimethylbenzoate (Mesitoate) Ester 34. Methyl Carbonate 36. 2,2,2-Trichloroethyl Carbonate 39. Allyl Carbonate... 

When these labeled oxaloacetates enter a second turn of the cycle, both of the carboxyl carbons are lost as CO2, but the methylene and carbonyl carbons survive through the second turn. Thus, the methyl carbon of a labeled acetyl-CoA survives two full turns of the cycle. In the third turn of the cycle, one-half of the carbon from the original methyl group of acetyl-CoA has become one of the carboxyl carbons of oxaloacetate and is thus lost as CO2. In the fourth turn of the cycle, further scrambling results in loss of half of the remaining labeled carbon (one-fourth of the original methyl carbon label of acetyl-CoA), and so on. 

It can be seen that the carbonyl and methyl carbons of labeled acetyl-CoA have very different fates in the TCA cycle. The carbonyl carbon survives the first turn intact but is completely lost in the second turn. The methyl carbon... 

---