Textile, size

Starch can be split into amylose and amylopectin by a commercial process based on selective solubilities. Amylose is used for making edible films, and amylopectin for textile sizing and finishing, and as a thickener in foods. 

Textile sizing Textile technology Textile treatment... 

Locust bean gum and its derivatives are exceUent film formers and can be used either alone or in combination with starch as textile sizing agents and dye thickeners in textile printing, and as fiber bonding and beater additives in the papermaking industry. However, in most of these appHcations it has been replaced by guar. 

Tamarind kernel powder is insoluble in cold water, but upon heating forms thick viscous coUoidal dispersions at relatively low concentrations (2—3%). Upon drying, elastic films are formed. Tamarind seed polysaccharide is used as a low cost textile sizing agent in India. 

Com and rice starches have been oxidized and subsequently cyanoethylated (97). As molecular size decreases due to degradation during oxidation, the degree of cyanoethylation increases. The derivatized starch shows pseudoplastic flow in water dispersion at higher levels of cyanoethylation the flow is thixotropic. Com and rice starches have been oxidized and subsequently carboxymethylated (98). Such derivatives are superior in the production of textile sizes. Potato starch has been oxidized with neutral aqueous bromine and fully chemically (99) and physically (100) characterized. Amylose is more sensitive to bromine oxidation than amylopectin and oxidation causes a decrease in both gelatinization temperature range and gelatinization enthalpy. 

Sodium chlorite oxidation of com and rice starches is recommended for the production of textile sizes (101) and oxidized starch is recommended as a hardening agent in the immobilization of microbial cells within gelatin (102). 

Starch monophosphates are quite useful in foods because of their superior freeze—thaw stabiUty. As thickeners in frozen gravy and frozen cream pie preparations, they are preferred to other starches. A pregelatinized starch phosphate has been developed (131) which is dispersible in cold water, for use in instant dessert powders and icings and nonfood uses such as core binders for metal molds, in papermaking to improve fold strength and surface characteristics, as a textile size, in aluminum refining, and as a detergent builder. 

Poly(vinyl alcohol) will function as a non-ionic surface active agent and is used in suspension polymerisation as a protective colloid. In many applications it serves as a binder and thickener is addition to an emulsifying agent. The polymer is also employed in adhesives, binders, paper sizing, paper coatings, textile sizing, ceramics, cosmetics and as a steel quenchant. 

Poly(methyl acrylate) is water-sensitive and, unlike the corresponding methacrylate, is attacked by alkalis. This polymer and some of the lower acrylate polymers are used in leather finishing and as a textile size. 

The polymers are of interest as water-soluble packaging films for a wide variety of domestic and industrial materials. (Additional advantages of the poly(ethylene oxide)s are that they remain dry to the feel at high humidities and may be heat sealed.) The materials are also of use in a number of solution application such as textile sizes and thickening agents. As a water-soluble film they are competitive with poly(vinyl alcohol) whereas in their solution applications they meet competition from many longer established natural and synthetic water-soluble polymers. 

Amylopectin is the polymeric component of starch and consists mainly of glucose units joined at the 1,4-positions. Relative molar mass tends to be very high, e.g. between 7 and 70 million. A variety of modified starches are used commercially which are produced by derivatisation to give materials such as ethanoates (acetates), phosphates, and hydroxyalkyl ethers. Modified and unmodified starches are used in approximately equal tonnages, mainly in papermaking, paper coatings, paper adhesives, textile sizes, and food thickeners. 

Vinyl acetate is polymerized to poly(vinyl acetate), (PVAc), which finds use in adhesives and water-based paints. Some PVAc is hydrolyzed (reacted with water) to poly(vinyl alcohol) (PVA) for textile sizing, adhesives, and paper coatings. A substantial amount of U.S.-produced vinyl acetate is exported. Prior to 1970, almost all vinyl acetate was made from acetylene. Now none of it is. 

Pure xylan is not employed in industry. but crude xylan or pentosans are of industrial importance. Xylan has been proposed as a textile size but is not employed as yet for this purpose.130 Perhaps the largest use of pentosans is in their conversion to furfural, which has many applications and serves as the source of other furan derivatives. At the present time, large quantities of furfural are used in the extractive purification of petroleum products, and recently a large plant has been constructed to convert furfural by a series of reactions to adipic acid and hexamethylene-diamine, basic ingredients in the synthesis of nylon. In commercial furfural manufacture, rough ground corn cobs are subjected to steam distillation in the presence of hydrochloric acid. As mentioned above, direct preferential hydrolysis of the pentosan in cobs or other pentosan-bearing products could be used for the commercial manufacture of D-xylose. 

By 2000, the alpha olefin market had grown to more than 3. billion pounds. Technology had brought down the cost of producing them and simultaneously, a broad range of applications for all the alpha olefins expanded rapidly—surfactants, synthetic lubricants, plasticizer alcohols, fatty acids, mercaptans, comonomers, biocides, paper and textile sizing, oil field chemicals, lube oil., additives, plastic processing aids, and cosmetics. 

Uses Solvent for nitrocellulose and ethyl cellulose coated paper, lacquers cements nail enamels, leather finishes textile sizing and printing compounds plastic wood. 

Acetylating and dehydrating agent used in the chemical and pharmaceutical industries for the manufacture of cellulose acetate, for textile sizing agents and cold bleaching activators, for polishing metals and for the production of brake fluids, dyes, explosives. 

Uses. In solvents, especially lacquer solvents textile sizes and paper coatings... 

POLYMERS, WATER-SOLUBLE. Any substance of high molecular weight which swells or dissolves in water at normal temperature. These fall into several groups, including natural, semisynthetic, and synthetic products. Their common property of water solubility makes them valuable for a wide variety of applications as thickeners, adhesives, coatings, fooe additives, textile sizing, etc. 

The main applications for PVA are in textile sizing, adhesives, polymerization stabilizers, paper coating, poly(vinyl butyial), and PVA fibers. In terms of percentage, and omitting the production of PVA not isolated prior to conversion into poly(vinyl butyral), the principal applications are textile sizes, at 30% adhesives, including use as a protective colloid, at 25% fibers, at 15% paper sizes, at 15%, poly(vinyl butyral), at 10% and others, at 5%, which include water-soluble films, nonwoven fabric binders, thickeners, slow-release binders for fertilizer, photoprinting plates, sponges for cosmetic, and health care applications. 

Textile sizing agents such as polyvinyl alcohol may also be reclaimed from hot process water. Here, both polymeric membranes and inorganic, dynamic membranes are appropriate choices. Systems based on polymeric membranes operate at lower fluxes and require less recirculation pumping, and are somewhat more economical. Plants with treatment capacities as high as 60 m3 per hour are in operation. 

The performance and quality of starch can be improved through chemical modification (see Chapter 17). Chemical modifications provide processed foods, such as frozen, instant, dehydrated, encapsulated and heat-and-serve products, the appropriate texture, quality and shelf life (see Chapter 21), and improved processing condition tolerance, such as improved heat, shear and acid stability. Modification also allows starches to be used in the paper industry (see Chapter 19) as wet-end additives, sizing agents, coating binders, and adhesives and as textile sizes. 

---