Styrene chloride

Using this method, we have prepared polyethylene samples possessing a variety of functional groups, including acrylates, styrenes, chlorides and the like. Shown in Figure 2, these polymers with commercially relevant, precisely placed substituents provide models for evaluation of the effect of functionality on polyethylene. All of these functionalized ADMET polyethylenes crystallize, and the details of their thermal and crystallization behavior will be discussed in the sections that follow. 

Oxidation, (a) Oxidise 1 g. of styrene with KMn04 and NajCOj (for details see oxidation of benzyl chloride, p. 391). Benzoic acid, m.p. 121 is obtained. Stilbene similarly gives benzoic acid, but requires longer heating—about 1 hour. 

Vinylidene chloride and vinyl chloride lead to the copolymer known as Saran. Other commercial copolymers are produced from vinyl chloride and acrylonitrile (Dynel), and from maleic anhydride and styrene. 

In a 250 ml. distilling flask (1) place 122 g. (119 ml.) of p-phenylethyl alcohol and 40 g. of sodium hydroxide peUets (or 56 g. of potassium hydroxide). Heat is evolved. Warm gently until bubbles commence to form and the mixture separates into two sharply-defined layers. Distil slowly water, etc. passes over first accompamed by the gradual dis appearance of the upper phase. FinaUy the styrene passes over at 140 160° (mainly 150°) coUect this separately in a receiver containing about 0 1 g. of hydroquinone. Dry the distillate with a httle anhydrous calcium chloride or magnesium sulphate, and then distil under reduced pressure (2). C oUect the pure styrene at 42-43°/18 mm. The 3rield is 80 g. Add about 0-2 g. of hydroquinone (anti-oxidant) if it is desired to keep the phenylethylene. 

Chlorides are inert. However, the reaction ofp-chlorobenzophenone (9) with a styrene derivative proceeds satisfactorily at 150 C by u.sing dippb [l,4-bis(-diisopropylphosphino)butane] as a ligand to give the stilbene derivative 10. However, dippp [l,3-bis(diisopropylphosphino)propane] is an ineffective ligand[13]. On the other hand, the coupling of chlorobenzene with styrene proceeds in the presence of Zn under base-free conditions to afford the cis-stilbene 11 as a main product with evolution of H . As the ligand, dippp is... 

Acyl halides are intermediates of the carbonylations of alkenes and organic-halides. Decarbonylation of acyl halides as a reversible process of the carbo-nylation is possible with Pd catalyst. The decarbonylation of aliphatic acid chlorides proceeds with Pd(0) catalyst, such as Pd on carbon or PdC, at around 200 °C[109,753]. The product is a mixture of isomeric internal alkenes. For example, when decanoyl chloride is heated with PdCF at 200 C in a distillation flask, rapid evolution of CO and HCl stops after I h, during which time a mixture of nonene isomers was distilled off in a high yield. The decarbonylation of phenylpropionyl chloride (883) affords styrene (53%). In addition, l,5-diphenyl-l-penten-3-one (884) is obtained as a byproduct (10%). formed by the insertion of styrene into the acyl chloride. Formation of the latter supports the formation of acylpalladium species as an intermediate of the decarbonylation. Decarbonylation of the benzoyl chloride 885 can be carried out in good yields at 360 with Pd on carbon as a catalyst, yielding the aryl chloride 886[754]. 

Copolymerization can be carried out with styrene, acetonitrile, vinyl chloride, methyl acrylate, vinylpyridines, 2-vinylfurans, and so forth. The addition of 2-substituted thiazoles to different dienes or mixtures of dienes with other vinyl compounds often increases the rate of polymeriza tion and improves the tensile strength and the rate of cure of the final polymers. This allows vulcanization at lower temperature, or with reduced amounts of accelerators and vulcanizing agents. 

ETHYLENE We discussed ethylene production in an earlier boxed essay (Section 5 1) where it was pointed out that the output of the U S petrochemi cal industry exceeds 5 x 10 ° Ib/year Approximately 90% of this material is used for the preparation of four compounds (polyethylene ethylene oxide vinyl chloride and styrene) with polymerization to poly ethylene accounting for half the total Both vinyl chloride and styrene are polymerized to give poly(vinyl chloride) and polystyrene respectively (see Table 6 5) Ethylene oxide is a starting material for the preparation of ethylene glycol for use as an an tifreeze in automobile radiators and in the produc tion of polyester fibers (see the boxed essay Condensation Polymers Polyamides and Polyesters in Chapter 20)... 

Alkenyl halides such as vinyl chloride (H2C=CHC1) do not form carbocations on treatment with aluminum chloride and so cannot be used m Friedel-Crafts reactions Thus the industrial preparation of styrene from benzene and ethylene does not involve vinyl chloride but proceeds by way of ethylbenzene... 

Acrylonitrile-butadiene-styrene (ABS) copolymer Poly(vinylidene chloride)... 

Acrylic poly (vinyl chloride) alloy Acrylonitrile-butadiene-styrene-poly(vinyl chloride) alloy... 

Polyolefin Polyester Block copolymers of styrene and butadiene or styrene and isoprene Block copolymers of styrene and ethylene or styrene and butylene Poly(vinyl chloride) and poly(vinyl acetate) ... 

Figure 9.17 Plot of log [i ]M versus retention volume for various polymers, showing how different systems are represented by a single calibration curve when data are represented in this manner. The polymers used include linear and branched polystyrene, poly(methyl methacrylate), poly(vinyl chloride), poly(phenyl siloxane), polybutadiene, and branched, block, and graft copolymers of styrene and methyl methacrylate. [From Z. Grubisec, P. Rempp, and H. Benoit, Polym. Lett. 5 753 (1967), used with permission of Wiley.]...

Uses. The a2obisnitriles have been used for bulk, solution, emulsion, and suspension polymeri2ation of all of the common vinyl monomers, including ethylene, styrene vinyl chloride, vinyl acetate, acrylonitrile, and methyl methacrylate. The polymeri2ations of unsaturated polyesters and copolymeri2ations of vinyl compounds also have been initiated by these compounds. 

A number of methods such as ultrasonics (137), radiation (138), and chemical techniques (139—141), including the use of polymer radicals, polymer ions, and organometaUic initiators, have been used to prepare acrylonitrile block copolymers (142). Block comonomers include styrene, methyl acrylate, methyl methacrylate, vinyl chloride, vinyl acetate, 4-vinylpyridine, acryUc acid, and -butyl isocyanate. 

In the case of poly(vinyl chloride) plastics, the FWA is mixed dry with the PVC powder before processing or dissolved in the plasticising agent (see Vinyl polymers). Polystyrene, acrylonitrile—butadiene—styrene (ABS), and polyolefin granulates are powdered with FWA prior to extmsion (2,78) (see... 

Physical Stabilization Process. Cellulai polystyrene [9003-53-6] the outstanding example poly(vinyl chloride) [9002-86-2] copolymers of styrene and acrylonitrile (SAN copolymers [9003-54-7]) and polyethylene [9002-88-4] can be manufactured by this process. 

The combination of stmctural strength and flotation has stimulated the design of pleasure boats using a foamed-in-place polyurethane between thin skins of high tensUe strength (231). Other ceUular polymers that have been used in considerable quantities for buoyancy appHcations are those produced from polyethylene, poly(vinyl chloride), and certain types of mbber. The susceptibUity of polystyrene foams to attack by certain petroleum products that are likely to come in contact with boats led to the development of foams from copolymers of styrene and acrylonitrUe which are resistant to these materials... 

Sulfonated styrene—divinylbensene cross-linked polymers have been appHed in many of the previously mentioned reactions and also in the acylation of thiophene with acetic anhydride and acetyl chloride (209). Resins of this type (Dowex 50, Amherljte IR-112, and Permutit Q) are particularly effective catalysts in the alkylation of phenols with olefins (such as propylene, isobutylene, diisobutylene), alkyl haUdes, and alcohols (210) (see Ion exchange). Superacids. 

Other Polymers. Besides polycarbonates, poly(methyl methacrylate)s, cycfic polyolefins, and uv-curable cross-linked polymers, a host of other polymers have been examined for their suitabiUty as substrate materials for optical data storage, preferably compact disks, in the last years. These polymers have not gained commercial importance polystyrene (PS), poly(vinyl chloride) (PVC), cellulose acetobutyrate (CAB), bis(diallylpolycarbonate) (BDPC), poly(ethylene terephthalate) (PET), styrene—acrylonitrile copolymers (SAN), poly(vinyl acetate) (PVAC), and for substrates with high resistance to heat softening, polysulfones (PSU) and polyimides (PI). 

In these equations I is the initiator and I- is the radical intermediate, M is a vinyl monomer, I—M- is an initial monomer radical, I—M M- is a propagating polymer radical, and and are polymer end groups that result from termination by disproportionation. Common vinyl monomers that can be homo-or copolymeri2ed by radical initiation include ethylene, butadiene, styrene, vinyl chloride, vinyl acetate, acrylic and methacrylic acid esters, acrylonitrile, A/-vinylirnida2ole, A/-vinyl-2-pyrrohdinone, and others (2). 

Anionic polymerization of vinyl monomers can be effected with a variety of organometaUic compounds alkyllithium compounds are the most useful class (1,33—35). A variety of simple alkyllithium compounds are available commercially. Most simple alkyllithium compounds are soluble in hydrocarbon solvents such as hexane and cyclohexane and they can be prepared by reaction of the corresponding alkyl chlorides with lithium metal. Methyllithium [917-54-4] and phenyllithium [591-51-5] are available in diethyl ether and cyclohexane—ether solutions, respectively, because they are not soluble in hydrocarbon solvents vinyllithium [917-57-7] and allyllithium [3052-45-7] are also insoluble in hydrocarbon solutions and can only be prepared in ether solutions (38,39). Hydrocarbon-soluble alkyllithium initiators are used directiy to initiate polymerization of styrene and diene monomers quantitatively one unique aspect of hthium-based initiators in hydrocarbon solution is that elastomeric polydienes with high 1,4-microstmcture are obtained (1,24,33—37). Certain alkyllithium compounds can be purified by recrystallization (ethyllithium), sublimation (ethyllithium, /-butyUithium [594-19-4] isopropyllithium [2417-93-8] or distillation (j -butyUithium) (40,41). Unfortunately, / -butyUithium is noncrystaUine and too high boiling to be purified by distiUation (38). Since methyllithium and phenyllithium are crystalline soUds which are insoluble in hydrocarbon solution, they can be precipitated into these solutions and then redissolved in appropriate polar solvents (42,43). OrganometaUic compounds of other alkaU metals are insoluble in hydrocarbon solution and possess negligible vapor pressures as expected for salt-like compounds. 

Many synthetic latices exist (7,8) (see Elastomers, synthetic). They contain butadiene and styrene copolymers (elastomeric), styrene—butadiene copolymers (resinous), butadiene and acrylonitrile copolymers, butadiene with styrene and acrylonitrile, chloroprene copolymers, methacrylate and acrylate ester copolymers, vinyl acetate copolymers, vinyl and vinyUdene chloride copolymers, ethylene copolymers, fluorinated copolymers, acrylamide copolymers, styrene—acrolein copolymers, and pyrrole and pyrrole copolymers. Many of these latices also have carboxylated versions. 

MBS polymers are prepared by grafting methyl methacrylate and styrene onto a styrene—butadiene mbber in an emulsion process. The product is a two-phase polymer useful as an impact modifier for rigid poly(vinyl chloride). 

A review covers the preparation and properties of both MABS and MBS polymers (75). Literature is available on the grafting of methacrylates onto a wide variety of other substrates (76,77). Typical examples include the grafting of methyl methacrylate onto mbbers by a variety of methods chemical (78,79), photochemical (80), radiation (80,81), and mastication (82). Methyl methacrylate has been grafted onto such substrates as cellulose (83), poly(vinyl alcohol) (84), polyester fibers (85), polyethylene (86), poly(styrene) (87), poly(vinyl chloride) (88), and other alkyl methacrylates (89). 

---