Copolymers poly-

Prepared generally by ester interchange from polyvinylacelate (ethanoate) using methanol and base also formed by hydrolysis of the acetate by NaOH and water. The properties of the poly(vinyl alcohol) depend upon the structure of the original polyvinyl acetate. Forms copolymers. Used as a size in the textile industry, in aqueous adhesives, in the production of polyvinyl acetates (e.g. butynal) for safety glasses. U.S. production 1980... 

Several studies have concerned the microstnicture of lamellae in materials such as the block copolymers polystyrene-h/oc/r-poly-l-vinylpyridine [139] and polystyrene-h/oc/r-polybutadiene [140], as well as single crystals of poly-para-xylylene [139], and reveal features (such as intersecting lamellae (figure Bl.19.29)) that had not been previously observed. 

Figure Bl.19.29. AFM image of poly sty rene/poly butadiene copolymer, showing lamellar stnicture. (Taken ftom [140], figure 1.)...

Several studies have demonstrated the successful incoriDoration of [60]fullerene into polymeric stmctures by following two general concepts (i) in-chain addition, so called pearl necklace type polymers or (ii) on-chain addition pendant polymers. Pendant copolymers emerge predominantly from the controlled mono- and multiple functionalization of the fullerene core with different amine-, azide-, ethylene propylene terjDolymer, polystyrene, poly(oxyethylene) and poly(oxypropylene) precursors [63,64,65,66,62 and 66]. On the other hand, (-CggPd-) polymers of the pearl necklace type were fonned via the periodic linkage of [60]fullerene and Pd monomer units after their initial reaction with thep-xy y ene diradical [69,70 and 71]. 

Alexandridis P, Olsson U and Lindman B 1997 Structural polymorphism of amphiphilic copolymers Six lyotropic liquid crystalline and two solution phases in a poly(oxybutylene)-poly(oxyethylene)-water-xylene system Langmuir 23-34... 

Wanka G, Floffman FI and Ulbrict W 1990 The aggregation behavior of poly-(oxyethylene)-poly(oxypropylene)-poly-(oxyethylene)-block copolymers in aqueous solutions Colloid Polym. Sc/. 268 101-17... 

Waldman D A, Kolb B U, McCarthy T J and Hsu S L 1988 Infrared study of adsorbed monolayers of poly(styrene-propylene sulphide) (PS-PPS) block copolymers Polym. Mater. Sc/. Eng. 59 326-33... 

Poly(methyl methacrylate) (PMMA) Ethylene-chlorotrifluoroethylene copolymer... 

Poly(chlorotrifluoroethylene) (PCTFE) Butadiene-maleic acid copolymer (BMC)... 

Poly butylene (PB) Styrene-butadiene block copolymer... 

Acrylonitrile-butadiene-styrene (ABS) copolymer Poly(vinylidene chloride)... 

Styrene-acrylonitrile (SAN) copolymer Poly(vinyl butyrate) (PVB)... 

Styrene-butadiene copolymer Poly(vinyl formal)... 

Properties Homopolymer Copolymer 20% glass-reinforced homopolymer 25% glass-reinforced copolymer 21% poly(tetrafluoroethylene)- filled homopolymer... 

Fluorinated ethylene-propylene resin Poly(vinylidene fluoride) Ethylene-tetrafluoroethylene copolymer Ethylene- chlorotrifluoro- ethylene copolymer Cellulose- filled Glass-fiber- reinforced... 

Polyolefin Polyester Block copolymers of styrene and butadiene or styrene and isoprene Block copolymers of styrene and ethylene or styrene and butylene Poly(vinyl chloride) and poly(vinyl acetate) ... 

When a 0.8006-g sample of a poly(styrene/maleic anhydride) copolymer was prepared in the same manner, the following results were obtained... 

The following data were obtained on the same system described in Example 3.6. This time the copolymer (C) concentration is fixed at 25% by weight and the proportions of poly butadiene (B) and polyisoprene (I) are varied ... 

It is not the purpose of this book to discuss in detail the contributions of NMR spectroscopy to the determination of molecular structure. This is a specialized field in itself and a great deal has been written on the subject. In this section we shall consider only the application of NMR to the elucidation of stereoregularity in polymers. Numerous other applications of this powerful technique have also been made in polymer chemistry, including the study of positional and geometrical isomerism (Sec. 1.6), copolymers (Sec. 7.7), and helix-coil transitions (Sec. 1.11). We shall also make no attempt to compare the NMR spectra of various different polymers instead, we shall examine only the NMR spectra of different poly (methyl methacrylate) preparations to illustrate the capabilities of the method, using the first system that was investigated by this technique as the example. 

Figure 9.17 Plot of log [i ]M versus retention volume for various polymers, showing how different systems are represented by a single calibration curve when data are represented in this manner. The polymers used include linear and branched polystyrene, poly(methyl methacrylate), poly(vinyl chloride), poly(phenyl siloxane), polybutadiene, and branched, block, and graft copolymers of styrene and methyl methacrylate. [From Z. Grubisec, P. Rempp, and H. Benoit, Polym. Lett. 5 753 (1967), used with permission of Wiley.]...

VF copolymers [FLUORINE COMPOUNDS, ORGANIC - POLY(VINYL FLUORIDE)] (Vol 11)... 

COLORANTSFORFOOD,DRUGS,COSPffiTICSANDPffiDICALDEVICES] (Void) Poly(hydroxyethyl methacrylate)-dye copolymers... 

Materials that typify thermoresponsive behavior are polyethylene—poly (ethylene glycol) copolymers that are used to functionalize the surfaces of polyethylene films (smart surfaces) (20). When the copolymer is immersed in water, the poly(ethylene glycol) functionaUties at the surfaces have solvation behavior similar to poly(ethylene glycol) itself. The abiUty to design a smart surface in these cases is based on the observed behavior of inverse temperature-dependent solubiUty of poly(alkene oxide)s in water. The behavior is used to produce surface-modified polymers that reversibly change their hydrophilicity and solvation with changes in temperatures. Similar behaviors have been observed as a function of changes in pH (21—24). 

Formaldehyde homopolymer is composed exclusively of repeating oxymethylene units and is described by the term poly oxymethylene (POM) [9002-81-7]. Commercially significant copolymers, for example [95327-43-8] have a minor fraction (typically less than 5 mol %) of alkyUdene or other units, derived from cycHc ethers or cycHc formals, distributed along the polymer chain. The occasional break in the oxymethylene sequences has significant ramifications for polymer stabilization. 

The many commercially attractive properties of acetal resins are due in large part to the inherent high crystallinity of the base polymers. Values reported for percentage crystallinity (x ray, density) range from 60 to 77%. The lower values are typical of copolymer. Poly oxymethylene most commonly crystallizes in a hexagonal unit cell (9) with the polymer chains in a 9/5 helix (10,11). An orthorhombic unit cell has also been reported (9). The oxyethylene units in copolymers of trioxane and ethylene oxide can be incorporated in the crystal lattice (12). The nominal value of the melting point of homopolymer is 175°C, that of the copolymer is 165°C. Other thermal properties, which depend substantially on the crystallization or melting of the polymer, are Hsted in Table 1. See also reference 13. 

Acrylics. Acetone is converted via the intermediate acetone cyanohydrin to the monomer methyl methacrylate (MMA) [80-62-6]. The MMA is polymerized to poly(methyl methacrylate) (PMMA) to make the familiar clear acryUc sheet. PMMA is also used in mol ding and extmsion powders. Hydrolysis of acetone cyanohydrin gives methacrylic acid (MAA), a monomer which goes direcdy into acryUc latexes, carboxylated styrene—butadiene polymers, or ethylene—MAA ionomers. As part of the methacrylic stmcture, acetone is found in the following major end use products acryUc sheet mol ding resins, impact modifiers and processing aids, acryUc film, ABS and polyester resin modifiers, surface coatings, acryUc lacquers, emulsion polymers, petroleum chemicals, and various copolymers (see METHACRYLIC ACID AND DERIVATIVES METHACRYLIC POLYMERS). 

The major use of vinylpyrrohdinone is as a monomer in manufacture of poly(vinylpyrrohdinone) (PVP) homopolymer and in various copolymers, where it frequendy imparts hydrophilic properties. When PVP was first produced, its principal use was as a blood plasma substitute and extender, a use no longer sanctioned. These polymers are used in pharmaceutical and cosmetic appHcations, soft contact lenses, and viscosity index improvers. The monomer serves as a component in radiation-cured polymer compositions, serving as a reactive diluent that reduces viscosity and increases cross-linking rates (see... 

Under conditions of extreme acidity or alkalinity, acryhc ester polymers can be made to hydroly2e to poly(acryhc acid) or an acid salt and the corresponding alcohol. However, acryhc polymers and copolymers have a greater resistance to both acidic and alkaline hydrolysis than competitive poly(vinyl acetate) and vinyl acetate copolymers. Even poly(methyl acrylate), the most readily hydroly2ed polymer of the series, is more resistant to alkah than poly(vinyl acetate) (57). Butyl acrylate copolymers are more hydrolytically stable than ethyl acrylate copolymers (58). 

Suspension Polymerization. Suspension polymerisation yields polymer in the form of tiny beads, which ate primarily used as mol ding powders and ion-exchange resins. Most suspension polymers prepared as mol ding powders are poly(methyl methacrylate) copolymers containing up to 20% acrylate for reduced btittieness and improved processibiUty are also common. 

---