Sodium-potassium nitrate, carbonate

Kust (4) has potentiometrically determined the equilibrium constant for carbonate dissociation in fused sodium-potassium nitrate eutectic ... 

In addition, precipitation of fission-product elements has been demonstrated. The addition of sodium carbonate or sodium sulfate to molten equimolar sodium-potassium nitrate containing soluble strontium nitrate results in precipitation of strontium carbonate or strontium sulfate, respectively. Molybdenum trioxide, M0O3, added to an equimolar sodium-potassium nitrate melt resulted in evolution of nitrogen dioxide and dissolution of the molybdenum, presumably as the molybdate anion, MogOy (14). Addition of soluble strontium nitrate to this nitrate melt produced an insoluble precipitate that was also insoluble in water. The existence of an aqueous insoluble strontium molybdate is known, and it is believed that a similar species is formed in the melt. 

Soil as an Electrolyte Most soils are conductive due to the presence of dissolved ions, such as calcium, magnesium, sodium, potassium, (bi) carbonate, some soluble fatty acids, nitrate, phosphate, sulfate, and chloride ions. Most seemingly, dry soils have more than 5% moisture, sufficient to provide a continuous path for these ions to move. This is essential for plants as the roots need access to these nutrients and ion transport across membranes is the means with which they extract them. The most signihcant feature of natural soils, with respect to their contamination and subsequent remediation, is the high ion exchange capacity (Table 33.1). 

Fusion of a manganese compound with sodium carbonate and potassium nitrate (on porcelain) gives a green manganate(VI) (p.. 86)... 

An alloy of sodium and potassium (NaK) is used as a heat-transfer medium. Many potassium salts are of utmost importance, including the hydroxide, nitrate, carbonate, chloride, chlorate, bromide, iodide, cyanide, sulfate, chromate, and dichromate. 

Nantokite, see Copper(I) chloride Natron, see Sodium carbonate Naumannite, see Silver selenide Neutral verdigris, see Copper(H) acetate Nitre (niter), see Potassium nitrate Nitric oxide, see Nitrogen(II) oxide Nitrobarite, see Barium nitrate Nitromagnesite, see Magnesium nitrate 6-water Nitroprusside, see Sodium pentacyanonitrosylfer-rate(II) 2-water... 

Sal soda, see Sodium carbonate 10-water Saltpeter, see Potassium nitrate Scacchite, see Manganese chloride Scheelite, see Calcium tungstate(VI)(2—)... 

Black Powder. Black powder is mainly used as an igniter for nitrocellulose gun propellant, and to some extent in safety blasting fuse, delay fuses, and in firecrackers. Potassium nitrate black powder (74 wt %, 15.6 wt % carbon, 10.4 wt % sulfur) is used for military appHcations. The slower-burning, less cosdy, and more hygroscopic sodium nitrate black powder (71.0 wt %, 16.5 wt % carbon, 12.5 wt % sulfur) is used industrially. The reaction products of black powder are complex (Table 12) and change with the conditions of initia tion, confinement, and density. The reported thermochemical and performance characteristics vary greatly and depend on the source of material, its physical form, and the method of determination. Typical values are Hsted in Table 13. 

The cmde phthaUc anhydride is subjected to a thermal pretreatment or heat soak at atmospheric pressure to complete dehydration of traces of phthahc acid and to convert color bodies to higher boiling compounds that can be removed by distillation. The addition of chemicals during the heat soak promotes condensation reactions and shortens the time required for them. Use of potassium hydroxide and sodium nitrate, carbonate, bicarbonate, sulfate, or borate has been patented (30). Purification is by continuous vacuum distillation, as shown by two columns in Figure 1. The most troublesome impurity is phthahde (l(3)-isobenzofuranone), which is stmcturaHy similar to phthahc anhydride. Reactor and recovery conditions must be carefully chosen to minimize phthahde contamination (31). Phthahde [87-41-2] is also reduced by adding potassium hydroxide during the heat soak (30). 

Gas-phase oxidation of propylene using oxygen in the presence of a molten nitrate salt such as sodium nitrate, potassium nitrate, or lithium nitrate and a co-catalyst such as sodium hydroxide results in propylene oxide selectivities greater than 50%. The principal by-products are acetaldehyde, carbon monoxide, carbon dioxide, and acrolein (206—207). This same catalyst system oxidizes propane to propylene oxide and a host of other by-products (208). 

Organic selenium compounds and siUceous materials (rock, ore, concentrates) are fused with mixtures of sodium carbonate and various oxidants, eg, sodium peroxide, potassium nitrate, or potassium persulfate. For volatile compounds, this fusion is performed in a bomb or a closed system microwave digestion vessel. An oxidizing fusion usually converts selenium into Se(VI) rather than Se(IV). 

Quantitatively, sulfur in a free or combined state is generally determined by oxidizing it to a soluble sulfate, by fusion with an alkaH carbonate if necessary, and precipitating it as insoluble barium sulfate. Oxidation can be effected with such agents as concentrated or fuming nitric acid, bromine, sodium peroxide, potassium nitrate, or potassium chlorate. Free sulfur is normally determined by solution in carbon disulfide, the latter being distilled from the extract. This method is not useful if the sample contains polymeric sulfur. 

If tin and sulfur are heated, a vigorous reaction takes place with the formation of tin sulfides. At 100—400°C, hydrogen sulfide reacts with tin, forming stannous sulfide however, at ordinary temperatures no reaction occurs. Stannous sulfide also forms from the reaction of tin with an aqueous solution of sulfur dioxide. Molten tin reacts with phosphoms, forming a phosphide. Aqueous solutions of the hydroxides and carbonates of sodium and potassium, especially when warm, attack tin. Stannates are produced by the action of strong sodium hydroxide and potassium hydroxide solutions on tin. Oxidizing agents, eg, sodium or potassium nitrate or nitrite, are used to prevent the formation of stannites and to promote the reactions. 

The main metals in brines throughout the world are sodium, magnesium, calcium, and potassium. Other metals, such as lithium and boron, are found in lesser amounts. The main nonmetals ate chloride, sulfate, and carbonate, with nitrate occurring in a few isolated areas. A significant fraction of sodium nitrate and potassium nitrate comes from these isolated deposits. Other nonmetals produced from brine ate bromine and iodine. 

Ion-selective electrodes are available for the electro analysis of most small anions, eg, haUdes, sulfide, carbonate, nitrate, etc, and cations, eg, lithium, sodium, potassium, hydrogen, magnesium, calcium, etc, but having varying degrees of selectivity. The most successful uses of these electrodes involve process monitoring, eg, for pH, where precision beyond the unstable reference electrode s abiUty to deUver is not generally required, and for clinical apphcations, eg, sodium, potassium, chloride, and carbonate in blood, urine, and semm. 

Elsewhere, in a series of Japanese patents, mixtures of resorcinol + sodium nitrate, glycerine + sodium nitrate, lithium hydroxide + tungstate, etc., have been claimed to be effective. An example of the use of inhibited cooling mixtures of low toxicity is provided by a patent which describes a mixture of silicate-I- polyphosphate -I- a saccharide, e.g. sucrose or fructose, as the inhibitor formulation in a propylene glycol -I- potassium-hydrogen-carbonate mixture used in aluminium cooler boxes for ice-cream. 

Substances which are insoluble or only partially soluble in acids are brought into solution by fusion with the appropriate reagent. The most commonly used fusion reagents, or fluxes as they are called, are anhydrous sodium carbonate, either alone or, less frequently, mixed with potassium nitrate or sodium peroxide potassium pyrosulphate, or sodium pyrosulphate sodium peroxide sodium hydroxide or potassium hydroxide. Anhydrous lithium metaborate has found favour as a flux, especially for materials containing silica 12 when the resulting fused mass is dissolved in dilute acids, no separation of silica takes place as it does when a sodium carbonate melt is similarly treated. Other advantages claimed for lithium metaborate are the following. 

Naturally, the flux employed will depend upon the nature of the insoluble substance. Thus acidic materials are attacked by basic fluxes (carbonates, hydroxides, metaborates), whilst basic materials are attacked by acidic fluxes (pyroborates, pyrosulphates, and acid fluorides). In some instances an oxidising medium is useful, in which case sodium peroxide or sodium carbonate mixed with sodium peroxide or potassium nitrate may be used. The vessel in which fusion is effected must be carefully chosen platinum crucibles are employed for... 

A process for the gravimetric determination of mixtures of selenium and tellurium is also described. Selenium and tellurium occur in practice either as the impure elements or as selenides or tellurides. They may be brought into solution by mixing intimately with 2 parts of sodium carbonate and 1 part of potassium nitrate in a nickel crucible, covering with a layer of the mixture, and then heating gradually to fusion. The cold melt is extracted with water, and filtered. The elements are then determined in the filtrate. 

A. Dry Process Discussion. The oxidation is carried out by fusion with sodium peroxide, or, less efficiently, with sodium carbonate and potassium nitrate ... 

C03-0109. The following pairs of substances are quite different despite having similar names. Write correct formulas for each, (a) sodium nitrite and sodium nitrate (b) potassium carbonate and potassium hydrogen carbonate (c) iron(II) oxide and iron(IIt) oxide and (d) iodine and iodide ion. 

The same goes for carbon (the accident was caused because carbon was used instead of manganese dioxide, by mistake), sulphur and phosphorus. There was a detonation with carbon. With phosphorus the detonation occurred once the carbon disulphide used to dissolve phosphorus vapourised red phosphorus behaves the same way. The same happened with the potassium chlor-ate/sodium nitrate/sulphur/carbon mixture, which led to a violent detonation as well as with the potassium perchlorate/aluminium/potassium nitrate/barium nitrate/water mixture. In the last case the explosion took place after an induction period of 24h. 

Metal oxosalts MRH Ammonium nitrate 8.79/69, potassium nitrate 7.57/58, silver nitrate 6.95/70, barium sulfate 4.27/71, copper(II) sulfate 7.03/58, sodium sulfate 5.86/60, potassium carbonate, 3.10/66. 

Nitration of 206 with a mixture of potassium nitrate and sulfuric acid yielded a mixture of dinitro derivative 240 and oxidation product 46. Heating 206 with sodium borohydride led to hydrolysis to 208 rather than to any reduction product. On the other hand, reduction with zinc in cold acetic acid provided dihydro derivative 241, whereas catalytic hydrogenation over palladium on carbon provided tetrahydro derivative 242 (Scheme 59) [90JCS(P 1) 1463]. 

Figure 11.2. Top shows exchange of higher valent iron for lower valent potassium when sodium and iron are at the same concentrations. Bottom shows exchange of sodium for potassium when sodium is at a much higher concentration than iron or potassium. The common anions in soil, chloride, sulfate, nitrate, carbonate, bicarbonate, and the anions of small acids such as acetate, have been omitted for clarity. 

Major constituents (greater than 5 mg/L) Minor constituents (O.Ol-lO.Omg/L) Selected trace constituents (less than 0.1 mg/L) Bicarbonate, calcium, carbonic acid, chloride, magnesium, silicon, sodium, sulfate Boron, carbonate, fluoride, iron, nitrate, potassium, strontium Aluminum, arsenic, barium, bromide, cadmium, chromium, cobalt, copper, gold, iodide, lead, Uthium, manganese, molybdenum, nickel, phosphate, radium, selenium, silver, tin, titanium, uranium, vanadium, zinc, zirconium... 

A mixture of anhydrous lithium nitrate and trifluoroacetic anhydride in acetonitrile in the presence of sodium carbonate has been used to convert alcohols to nitrate esters for a range of peptide, carbohydrate and steroid substrates. Yields are good to high but products need puritication to remove trifluoroacetate ester impurities, which can be signiflcant in the absence of the carbonate. A similar system used for the nitration of electron-rich aromatic heterocycles employs trifluoroacetic anhydride with ammonium or potassium nitrate. ... 

Grayish-white metal hody-centered cubic crystalline structure density 19.3 g/cm3 melts at 3,422°C vaporizes at 5,555°C vapor pressure 1 torr at 3,990°C electrical resistivity 5.5 microhm-cm at 20°C modulus of elasticity about 50 to 57 x lO psi (single crystal) Poisson s ratio 0.17 magnetic sus-ceptibilty +59 x 10-6 thermal neutron absorption cross section 19.2 + 1.0 barns (2,200m/sec) velocity of sound, about 13,000 ft/sec insoluble in water practically insoluble in most acids and alkabes dissolves slowly in hot concentrated nitric acid dissolves in saturated aqueous solution of sodium chlorate and basic solution of potassium ferricyanide also solubibzed by fusion with sodium hydroxide or sodium carbonate in the presence of potassium nitrate followed by treatment with water... 

Tungsten metal is not affected by aqueous alkalies at room temperature. In molten state, caustic soda and caustic potash slowly oxidize tungsten in the presence of air. Oxidiation is more rapid in the presence of an oxidizing agent such as potassium nitrate, potassium chlorate, or lead dioxide. A similar reaction occurs with fused sodium or potassium carbonate. Tungsten dissolves... 

Aluminum foil, Iodine powder. Carbon disulfide, 1,4,6,9-Tetrabromodiamantane, Sodium bisulfite. Hydrochloric acid. Methanol, Acetonitrile, Acetone, Sodium hydroxide. Magnesium sulfate. Potassium permanganate. Toluene Methylene chloride, 2-Bromomethanol, Trioxane, Aluminum chloride. Magnesium sulfate, Nitroform, Acetone, Sodium bicarbonate. Hexane, Silver nitrate. Acetonitrile 1,2-Dichloroethane, HexamethyldisUane, Iodine, Cyclohexane, 1,3-Dioxolane, Nitroform, Methylene chloride, Dimethylformamide, Sodium sulfate. Hydrochloric acid. Magnesium sulfate. Nitric acid. Sulfuric acid Sulfuryl chloride. Acetic anhydride. Nitric acid. Sodium bicarbonate. Sodium sulfate Nitric acid. Sulfuric acid, Malonamide Nitric acid. Sulfuric acid, Cyanoacetic acid Sulfuric acid, Acetasalicyclic acid. Potassium nitrate Nitroform, Diethyl ether, 1-Bromo-l-nitroethane, Sodium sulfuate... 

Nitric acid, Sulfuric acid, Phloroglucinol, Hydrochloric acid Sodium chlorate. Copper sulfate. Ammonium hydroxide. Alcohol Sodium chlorate. Copper sulfate. Ammonium hydroxide. Alcohol Sulfuric acid. Potassium nitrate, 1,3,5-Trifluorobenzene, Methylene chloride. Hexane, Charcoal, Sodium sulfate, 2-Amino-2-methylpropanone, Potassium hydrogen carbonate, 1,2-Dichloroethane, Trifluoroacetic acid. Urea, Dimethylformamide Nitric acid. Urine... 

Nitroglycerin, Potassium nitrate, Nitrocellulose, Wood meal, Vaseline, Charcoal powder Nitroglycerin, Potassium perchlorate, Ammonium oxalate, Nitrocellulose, Wood meal Nitroglycerin, Sodium nitrate, Sodium carbonate, Wood meal... 

---