Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Separable forms

Derivation of an energy level diagram shows that it consists of two sets of energy levels, one corresponding to the single lines and the other to the double lines, and that no transitions between the two sets of levels are observed. For this reason it was suggested that helium exists in two separate forms. In 1925 it became clear that, when account is taken of electron spin, the two forms are really singlet helium and triplet helium. [Pg.219]

Pyrazolines have only one double bond within the nucleus and, depending on the position of the double bond, can exist ia three separate forms l-pyrazoliue [2721 3-9] (6), 2-pyrazoliae [109-98-8] (7), and 3-pyrazoliae [6569-23-9] (8). [Pg.305]

The SIC code system defines business "establlshmenls as "distinct and separata economic activities [that] are performed at a single physical location." Under section 372.30(c) of the reporting rule, you may submit a separate Form R for each establishment, or for groups of establishments, in your covered facility, provided that all releases of the toxic chemicals... [Pg.34]

Week task forms are completed for each week. They may be designed as a separate form for each trade or as one covering all trades. The latter will, of course, depend on the number of tasks per week for the individual trades. [Pg.787]

The alkaline version of the Mn02 / zinc cell follows a different concept because it turns the construction of the Leclanche cell completely around now the cathode (Mn02 + carbon) forms a hollow cylinder contacting the inner wall of the cell container (steel) along its outer surface. The inner cavity has to accommodate anode, electrolyte, separator, and current collector. Usually, the separator forms a basket, which is automatically inserted and pre-... [Pg.200]

Use a separate form for each patient. Complete the form to the best of your abilities. Items 3,4, 7, 8,10.11, and 13 are considered essential and should be completed whenever possible. Parents/Guardians may need to consult the facility where the vaccine was administered for some of the information (such as manufacturer, lot number or laboratory data.)... [Pg.670]

The transesterification of fats and fatty oils by methanol into fatty acid methyl esters proceeds at 50-70°C without pressure. The deacidified fat is stirred for a short period with an excess of methanol and 0.1-0.5% caustic alkali as catalyst. On standing the reaction mixture separates forming a bottom layer of glycerin and a top layer of fatty acid esters. [Pg.29]

Nonmuscle/smooth muscle myosins-Il are structurally similar to striated muscle myosin-II, but they have slower rates of ATP hydrolysis than do their striated muscle counterparts. Nonmuscle/smooth muscle myosin-II is also regulated differently than striated muscle myosin-II. Nonmuscle myosin-II is divided into the invertebrate and vertebrate branches (Cheney et al., 1993). This group is ubiquitous because it is present in most lower organisms, such as slime molds, amoeba, sea urchins, etc., and in virtually all mammalian nonmuscle cells. Smooth muscle myosin-II is also somewhat heterogeneous in that at least three separate forms of smooth muscle heavy chains, with molecular weights of 196,000, 200,000, and 204,000 have been identified (Kawamoto and Adelstein, 1987). The physiological properties of these separate myosin heavy chains are not yet known. [Pg.63]

Poly(epichlorohydrin) (PECH) and poly(2,6 - dimethyl-1,4-phenylene oxide) (PPO) containing pendant mesogenic units separated form the main chain through spacers of zero to ten methylene units were synthesized and characterized in order to test the "spacer concept." Both polymers were modified by phase transfer catalyzed esterifications of the chloromethyl groups (PECH) or the bromobenzyl groups (brominated PPO) with potassium co -(4-oxybiphenyl) alkanoates and potassium u-(4-methoxy-4-oxybiphenyl)-alk.an oates. While PPO required ten methylene units as a spacer and 4,4 -methoxybiphenyl as mesogen to present thermotropic liquid crystalline mesomorphism,... [Pg.97]

The effect of substituents on colour in substituted anthraquinones may be rationalised using the valence-bond (resonance) approach, in the same way as has been presented previously for a series of azo dyes (see Chapter 2 for details). For the purpose of explaining the colour of the dyes, it is assumed that the ground electronic state of the dye most closely resembles the most stable resonance forms, the normal Kekule-type structures, and that the first excited state of the dye more closely resembles the less stable, charge-separated forms. Some relevant resonance forms for anthraquinones 52, 52c, 52d and 52f are illustrated in Figure 4.3. The ground state of the parent compound 52 is assumed to resemble closely structures such as I, while charge-separated forms, such as structure II, are assumed to make a major contribution to the first excited state. Structure II is clearly unstable due to the carbocationic centre. In the case of aminoanthraquinones 52c and 52d, donation of the lone pair from the... [Pg.73]

R = H, X = S, A = Et3N and Py). In solution the former is mainly in an ionic form the latter exists as a complex. The basicity of the amine is assumed to be important. Triethylamine is a stronger base than pyridine and the ionic form is stabilized. When the proton affinity is weak, the basicity in relation to the B(III) atom, a Lewis acid, plays an important role. This involves an equilibrium shift toward the complex. This assumption is confirmed by an easy displacement of pyridine by triethylamine. The reverse process demands more severe conditions. In the NMR spectra of the triethylamine complex the signal is shifted from 22 to 42 ppm as pyridine is added. The absence of signals of two separate forms is evidence in favor of their fast interconversion. The chemical shift of the signal in 3IP spectra is 22 ppm (EtOH), 26 ppm (Py, DMFA), and 42 ppm (EtOH, Py) for complexes with triethylamine and pyridine. [Pg.99]

Despite this selectivity advantage of homogeneous catalysts, almost all of the industrial catalytic processes use heterogeneous catalysts, because of their one major advantage, their ease of separation form the reaction product. Being insoluble in the reaction... [Pg.3]

Interstellar ice The formation of ice layers or mantles on the surface of interstellar dust grains formed by the adsorption of O and H separately, forming water ice on the surface. [Pg.312]

Evidently the positive charge is more readily accepted by the dimethyl-amino group in the excited state, or the resonance description of the excited state of the molecule weights the charge-separated form LXXXIV more heavily. [Pg.245]

Starch is the major energy store of plants chemically it is a polymer of glucose and occurs in two separate forms, amylose and amylopectin. The ratio of the two types depends on the plant that the starch has come from typically starch is 20 30% amylose and 70-80% amylopectin but there are amylomaizes with more than 50% amylose while waxy maize produces almost pure amylopectin with less than 3% amylose. [Pg.35]

In this case, the effects of cco, Cq2, and T cannot be separated. However, the simplifying assumption of a separable form is often made the coupling between parameters may be weak, and even where it is strong, the simpler form may be an adequate representation over a narrow range of operating conditions. [Pg.66]

Since interconversions between different states of symmetry (i.e., between ortho- and parahydrogen) are forbidden, the adjustment of the relative ratios of the two spin isomers to the values corresponding to the thermal equilibrium at an arbitrary temperature is normally very slow and, therefore, must be catalyzed. In the absence of a catalyst, dihydrogen samples retain their once achieved ratio and, accordingly, they can be stored in their enriched or separated forms for rather long periods (a few weeks or even a few years in favorable cases). [Pg.319]

The chemical industry is a sub-industry of the process industry. The process industry is characterized by production in processes that can be convergent as well as divergent. The process industry consists of firms that "add value by mixing, separating, forming and/or chemical reactions by either batch of continuous mode" (Wallace 1992 reviewed by Den-nis/Meredith 2000, p. 683). Products in process industries can be intermediates and finished products at the same time sold or used for others products. Other sub-industries in the process industries are oil and gas, steel and metals, pulp and paper or pharmaceuticals as well as parts of consumer goods such as food production. [Pg.75]

The extent of the interaction depends upon the geometry of approach of the components, since this affects the amounts of possible approach. It also depends upon the phase relationships of the orbitals and upon their energy separations. A small energy separation forms greater interaction. [Pg.28]

Figure 1.18 Solvent polarity effect in an Sn 1 reaction. Increasing the polarity of the solvent stabihzes the charge separation formed in the transition state, lowering the activation energy and increasing the rate of reaction... Figure 1.18 Solvent polarity effect in an Sn 1 reaction. Increasing the polarity of the solvent stabihzes the charge separation formed in the transition state, lowering the activation energy and increasing the rate of reaction...
Such a process depends upon the difference in departure from ideality between the solvent and the components of the binary mixture to be separated. In the following example, both toluene and iso-octane separately form non-ideal liquid solutions with phenol, although the extent of the non-ideality with iso-octane is greater than that with toluene. When all three substances are present, therefore, the toluene and iso-octane themselves behave as a non-ideal mixture, and their relative volatility becomes high. [Pg.620]

Some aspects of the sequence classification of esterases need clarification [87]. In the case of ES4, two separate forms were purified and found to have virtually identical specificity and chemical properties. The enzymes ES8 and ES10 appear to be a monomer and a dimer, respectively, of the same enzyme, and ES9 is probably a combination of ES7 and ES8/10 [88]. For esterase ESI5, different p/ values have been reported by different authors. [Pg.49]

The aqueous batteries use water based electrolytes (e.g., KOH electrolyte for NiCd and NiMH and H2-SO4 electrolyte for lead acid), which are less resistive then nonaqueous electrolytes. Polyolefin materials are generally suitable for use in the manufacture of separators for these batteries, but they are not inherently wettable by aqueous electrolytes. Such electrolytes are therefore unable to penetrate the pores of a separator formed from such a material, so that ion migration through the pores in solution will not occur without modification. This problem is sometimes overcome by treating the polyolefin material with a surfactant, which allows an aqueous electrolyte to wet the material. However, such surfactant can be removed from the surfaces of the polyolefin material when electrolyte is lost from the device, for example during charging and discharging cycles, and it is not subsequently replaced on the material when the electrolyte is replenished. [Pg.206]

Particular mesophase formed by a binary mixture, the components of which do not separately form mesophases, with the particular mesophase existing above the melting points of both components. [Pg.112]


See other pages where Separable forms is mentioned: [Pg.469]    [Pg.87]    [Pg.259]    [Pg.10]    [Pg.440]    [Pg.1075]    [Pg.186]    [Pg.188]    [Pg.636]    [Pg.658]    [Pg.328]    [Pg.67]    [Pg.416]    [Pg.1178]    [Pg.28]    [Pg.115]    [Pg.136]    [Pg.178]    [Pg.548]    [Pg.35]    [Pg.47]    [Pg.229]    [Pg.268]    [Pg.10]    [Pg.87]    [Pg.35]    [Pg.220]   
See also in sourсe #XX -- [ Pg.9 ]




SEARCH



Film forming processing separation

Insoluble substance forms and separates from

Liquid-solid particle, separators Specification form

Separation by Forming Two Binary Azeotropes

Separation by Forming a Ternary Azeotrope

© 2024 chempedia.info