Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Standards manual

Complies with the operation manual standards specified by the supplier of the powder coating line. [Pg.58]

This manual provides instant answers for quality professionals, quality assurance managers, auditors, and protocol writers regarding what should be made part of quality manual standards and ISO 9000 standard operating procedures to enhance productivity. [Pg.425]

Vendor Manuals Standard Software Standard Computer Room Hardware Standard IT Infrastructure Standard Database... [Pg.800]

There is an extensive literature concerned with the preparation of supported catalysts but, unfortunately, it is sometimes difficult to determine precisely what procedures were used because of the ambiguity of many of the experimental descriptions. While an lUPAC manual standardizing the terms used in catalysis has been published the proposed usage is still not widely applied in the literature. The procedures described below are defined in these standard terms with some of the more commonly used descriptors also mentioned where appropriate. [Pg.268]

The manual standard method for determining bitterness in beer is based on an isooctane extraction of the degassed and acidified sample, and measuring at 275 nm the absorbance of the extract against pure iso-octane. This method was adapted by Sahle-strom et al.[48] into an FI liquid-liquid extraction system, achieving a sampling frequency of 60h . ... [Pg.207]

Automatic Structural Ahgnment against a Manual Standard the SCOP Classification of Proteins. [Pg.53]

Readers interested in specific or advanced noise control information are referred to the end of this chapter. Listed there are many texts, manuals, standards, and publications specializing in noise control that the authors have found to be useful. [Pg.411]

SEED (2012) SEED reference manual. Standard for the exchange of earthquake data, SEED format version 2.4. International Federation of Digital Seismograph Networks Incorporated Research Institutions for Seismology (IRIS), USGS. www.fdsn.org/seed manual/ SEEDManual V2.4.pdf... [Pg.2069]

Maps can be created by hand or by computer mapping packages. The latter has become standard. Nevertheless, care should be taken that the mapping process reflects the geological model. Highly complex areas may require considerable manual input to the maps which can subsequently be digitised. [Pg.142]

Up to now the Reference Block Method and the DGS-Method are world wide the most important techniques for evaluating defect signals in manual Ultrasonic Testing. Even today, individual national standards refer to either one of these two echo evaluation techniques. However, both reflected echo signals from natural defects are compared with an echo from a known reference reflector at the same distance. The result of the evaluation is either... [Pg.812]

We are confident that any user of this combined evaluation technique, as well as the development of future test standards for manual ultrasonic testing will benefit from this result, because it allows a greater flexibility in the applicable method without loosing reliability. Often an expensive production of a reference block can be avoided and therefore testing costs are reduced. Since all calculations are performed by a PC, the operator can fully concentrate on his most important duty scanning the workpiece and observing the A-scan. Additional time will be saved for the test documentation, since all testing results are stored in the instrument s memory (the PC s hard drive) with full link to the Software World (Microsoft Word, Excel, etc.). [Pg.818]

The sample frequency of the ADC (analogue to digital converter) should be 8 times higher than the test frequency (centre frequency of the spectrum). In dependence of the application, different ADC- boards are used. A standard board (20520) provides 8 bit resolution and up to 100 Msamples/s in single shot mode. For manual tests, up to 400 Msamples/s can be reached in the repetition mode. For scanning systems with high frequencies boards up to 400 Msamples/s (single shot) are available. [Pg.858]

HyperChem contains a database of amino and nucleic acid residues so you can quickly build polymers con laining these subunits. You can also read in structures in files from standard databases, such as the Brookhaven Protein Data Bank (see the HyperChem Reference Manual). [Pg.8]

There may be as many basis sets defined for polyatomic calculations as there are quantum chemists One would like to define, in advance, the standard basis sets that will be suitable to most users. However, one also wants to allow sophisticated users the capability to modify existing basis sets or define their own basis sets. We have thus defined a HyperChem basis set file format and included with HyperChem a number of these. BAS files that define standard basis sets. Users, however, can define as many of their own basis sets as they like using this file format. The details of the HyperChem basis set file format are described in the HyperChem Reference manual. [Pg.109]

Examine a procedure from Standard Methods for the Analysis of Waters and Wastewaters (or another manual of standard analytical methods), and identify the steps taken to compensate for interferences, to calibrate equipment and instruments, to standardize the method, and to acquire a representative sample. [Pg.52]

Many scientific calculators include two keys for calculating the standard deviation, only one of which corresponds to equation 4.3. Your calculator s manual will help you determine the appropriate key to use. [Pg.57]

Standard Industrial Classification Manual, National Technical Information Service, Springfield, Va., 1987. [Pg.350]

Ha2ardous Communi-cation Standard Compliance Manual Database Health and Safety Science Abstracts ISTP B Search MSDS/ETSS... [Pg.128]

Chemicals Chemical Manufacturers Association 2501 M Street, NW Washington, D.C. 20037 Manual of Standard and Recommended Practice ios. chemicals, containers, tank car unloading, and related procedures. [Pg.25]

International Union for Pure and AppHed Chemistry (lUPAC) Bank Court Way, Cowley Centre Oxford 0X4 3YP United Kingdom Among its pubheations in the standards field are Manual of Symbols and Terminologyfor Physico-chemical Quantities and Units, D. H. Whiffen, ed., Pergamon, New York, 1979, and Nomenclature of Inorganic Chemisty, Pergamon, New York, 1977. [Pg.26]

A piping system can be evaluated for its displacement and stress either by manual methods (charts, tables, hand calculation) or computerized solution. The latter has become the standard approach desktop and laptop computers can handle all but the most compHcated problems. Manual methods are used only for rough estimates on very simple systems. [Pg.61]

TheMmerican Standards and Testing Methods Manual, The American Society for Testing and Materials, Philadelphia, Pa., 1992. [Pg.323]

The quahty manual should be organized to faciUtate referral to the quahty system standard. It should be brief and refer to other documentation for more detail. The manual should be under document control, ie, each page is uniquely identified as to date or revision number and its preparer. It is common practice to offer customers a copy of the manual upon request, ie, the manual should not be proprietary. [Pg.369]

The second aspect of quahty documentation is to detail how the work processes referred to in the manual are performed. The QA unit is often the organization responsible for issuing a set of procedures designed to assure conformance to the appropriate standards or to company poHcy. The procedures, often called standard operation procedures (SOP) or quahty operating procedures (QOP), should include such topics as customer complaints, audit protocols, stabihty testing, preparation of COAs, test method vahdation, etc. [Pg.369]

Standard Industrial Classification Manual, Executive Office of the President, Office of Management and Budget, 1987 for sale by National Technical... [Pg.74]


See other pages where Standards manual is mentioned: [Pg.26]    [Pg.396]    [Pg.10]    [Pg.359]    [Pg.2344]    [Pg.131]    [Pg.26]    [Pg.396]    [Pg.10]    [Pg.359]    [Pg.2344]    [Pg.131]    [Pg.804]    [Pg.96]    [Pg.191]    [Pg.196]    [Pg.191]    [Pg.196]    [Pg.272]    [Pg.349]    [Pg.350]    [Pg.467]    [Pg.200]    [Pg.135]    [Pg.99]    [Pg.101]    [Pg.153]    [Pg.321]    [Pg.369]   
See also in sourсe #XX -- [ Pg.254 ]




SEARCH



© 2024 chempedia.info