Knobs

The oxygen used in the combustion is supplied by a small cylinder (120 Atm.) fitted with a pressure reduction valve, pressure gauge (to avoid the risk of the cylinder becoming exhausted during an actual determination) and fine control knob. It is important that the valve is kept free from oil or grease of any kind. In order to ensure the complete purity of the oxygen it is first passed through a purification train. 

Some empirical equations to predict cyclone pressure drop have been proposed (165,166). One (166) rehably predicts pressure drop under clean air flow for a cyclone having the API model dimensions. Somewhat surprisingly, pressure drop decreases with increasing dust loading. One reasonable explanation for this phenomenon is that dust particles approaching the cyclone wall break up the boundary layer film (much like spoiler knobs on an airplane wing) and reduce drag forces. 

The stainless steel plates are separated (ca 3 pm between) by nonabsorbent vulcanized gaskets. Various profiles and configurations, including raised knobs, crescents, channels, or diamonds, provide a rapid, uniform heat-transfer plate surface. During operation the plates must be pressed together to provide a seal, and mounted and coimected in such a manner that air is eliminated and that the product drains from the plates without opening. 

Process-variable feedback for the controller is achieved by one of two methods. The process variable can (I) be measured and transmitted to the controller by using a separate measurement transmitter with a 0.2-I.0-bar (3-15-psi pneumatic output, or (2) be sensed directly by the controller, which contains the measurement sensor within its enclosure. Controllers with integral sensing elements are available that sense pressure, differential pressure, temperature, and level. Some controller designs have the set point adjustment knob in the controller, making set point adjustment a local and manual operation. Other types receive a set point from a remotely located pneumatic source, such as a manual air set regulator or another controller, to achieve set point adjustment. There are versions of the pneumatic controller that support the useful one-, two-, and three-mode combinations of proportional, integral, and derivative actions. Other options include auto/manual transfer stations, antireset windup circuitry, on/off control, and process-variable and set point indicators. 

Metal enclosed type This type of assembly is completely enclosed on all sides by sheet metal except for the operating handles, knobs, instruments and inspection windows. The more conventional of them in use may be classified as follows,... 

In outdoor type switchgear or controlgear assemblies the normal practice is to provide a double door in the front to house the front panel and protect the door knobs, meters, lights, pushbuttons, reset knobs or other accessories mounted on the door and thus prevent water or dust leaking through joints, knockouts and fitments etc. It is also recommended to have a canopy on the top of the enclosure to protect the panel from direct rain. Figures 13.6 and 13.28 illustrate this type of construction. 

Indicating instruments, lamps, pushbuttons, selector switches and reset knobs etc. are mounted on the trolley on a hinged auxiliary door, as shown in Figures... 

A whole science, called metallography, is devoted to this. The oldest method is to cut the alloy in half, polish the cut faces, etch them in acid to colour the phases differently, and look at them in the light microscope. But you don t even need a microscope to see some grains. Look at any galvanised steel fire-escape or cast brass door knob and you will see the grains, etched by acid rain or the salts from people s hands. 

Detailed structure determinations of GCN4 and other coiled-coil proteins have shown that the a helices pack against each other according to the "knobs in holes" model first suggested by Francis Crick (Figure 3.5). Each side chain in the hydrophobic region of one of the a helices can contact four side chains from the second a helix. The side chain of a residue in position "d"... 

Figure 3.S Schematic diagram of packing side chains In the hydrophobic core of colled-coll structures according to the "knobs In holes" model. The positions of the side chains along the surface of the cylindrical a helix Is pro-jected onto a plane parallel with the heUcal axis for both a helices of the coiled-coil. (a) Projected positions of side chains in helix 1. (b) Projected positions of side chains in helix 2. (c) Superposition of (a) and (b) using the relative orientation of the helices In the coiled-coil structure. The side-chain positions of the first helix, the "knobs," superimpose between the side-chain positions In the second helix, the "holes." The green shading outlines a d-resldue (leucine) from helix 1 surrounded by four side chains from helix 2, and the brown shading outlines an a-resldue (usually hydrophobic) from helix 1 surrounded by four side chains from helix 2.

In most four-helix bundle structures, including those shown in Figure 3.7, the a helices are packed against each other according to the "ridges in grooves" model discussed later in this chapter. However, there are also examples where coiled-coil dimers packed by the "knobs in holes" model participate in four-helix bundle structures. A particularly simple illustrative example is the Rop protein, a small RNA-binding protein that is encoded by certain plasmids and is involved in plasmid replication. The monomeric sub unit of Rop is a polypeptide chain of 63 amino acids built up from two... 

Figure 3.8 Schematic diagram of the dimeric Rop molecule. Each subunit comprises two a helices arranged in a coiled-coil structure with side chains packed into the hydrophobic core according to the "knobs in holes" model. The two subunits are arranged in such a way that a bundle of four a helices is formed.

The important features of rigidity and transparency make the material competitive with polystyrene, cellulose acetate and poly(methyl methacrylate) for a number of applications. In general the copolymer is cheaper than poly(methyl methacrylate) and cellulose acetate, tougher than poly(methyl methacrylate) and polystyrene and superior in chemical and most physical properties to polystyrene and cellulose acetate. It does not have such a high transparency or such food weathering properties as poly(methyl methacrylate). As a result of these considerations the styrene-acrylonitrile copolymers have found applications for dials, knobs and covers for domestic appliances, electrical equipment and car equipment, for picnic ware and housewares, and a number of other industrial and domestic applications with requirements somewhat more stringent than can be met by polystyrene. 

The ether is also used in paint, varnish and lacquer formulations. A recent development is the use of ethyl cellulose gel lacquers. These are permanent coatings applied in a similar way to the strippable coatings. They have been used in the United States for coating tool handles, door knobs and bowling pins. 

The newer improved heat-resistant grades are finding use in saucepan handles, saucepan lid knobs, lamp housings, cooker handles, welding tongs and electric iron parts. 

The principal application of melamine-formaldehyde moulding compositions is for the manufacture of tableware, largely because of their wide colour range, surface hardness and stain resistance. The stain resistance does, however, leave something to be desired and one aim of current research is to discover alternative materials superior in this respect. Cellulose-filled compositions also find a small outlet for trays, clock cases and radio cabinets and other purposes. The mineral-filled powders are used in electrical applications and knobs and handles for kitchen utensils. 

Tuberculation-the formation of localized corrosion products scattered over tlic surface in the form of knob-like tiles. 

A process waste heat boiler was damaged when the control operator inadvertently closed the cooling water valve when he intended to open it. The manual control knob turned in the opposite direction from most of the other valves in the plant—the L, cooling water valve was air to close—most control valves were air... 

In an inherently safer design all of the control knobs would jii the same way to open a valve. 

In a similar incident, a furnace damper was closed in error. It was operated pneumatically. There was no indication on the control knob to show which was the open position and which was the closed position. 

Small leaks from the glands of a carbon monoxide compressor were collected by a fan and discharged outside the building. A man working near the compressor was affected by carbon monoxide. Itwas then found that a damper in the fan delivery line was shut. There was no label or other indication to show whether the damper was closed or open. In a similar incident, a furnace damper was closed in error. It was operated pneumatically, and again there was no indication on the control knob to show which were the open and closed positions. 

Daumling, m. little thumb Meek.) cam, knob, or the like. 

Griff, m. grip, grasp handle, knob, pull touch, feel. 

---