Identification, definition

Presently, there are no guidelines that are specifically directed at the identification (definition) and control of impurities in excipients. ... 

Staee 1. Problem Identification/Definition Evaluation/Decision... 

The definition of entropy and the identification of temperature made in the last subsection provides us with a coimection between the microcanonical ensemble and themiodynamics. 

Identification of Aromatic Hydrocarbons. Picric acid combines with many aromatic hydrocarbons, giving addition products of definite m.p. Thus with naphthalene it gives yellow naphthalene picrate, C oHg,(N08)jCeHiOH, m.p. 152°, and with anthracene it gives red anthracene picrate, C 4Hio,(NOj)jCeHjOH, m.p. 138 . For practical details, see p. 394. 

Normal distribution curves showing the definition of detection limit and limit of identification (LOI). The probability of a type 1 error is indicated by the dark shading, and the probability of a type 2 error is indicated by light shading. 

The Textile Eiber Product Identification Act (TEPIA) requires that the fiber content of textile articles be labeled (16). The Eederal Trade Commission estabhshed and periodically refines the generic fiber definitions. The current definition for a polyester fiber is "A manufactured fiber ia which the fiber-forming substance is any long-chain synthetic polymer composed of at least 85% by weight of an ester of a substituted aromatic carboxyUc acid, including but not restricted to terephthalate units, and para substituted hydroxyben2oate units."... 

Thermoanalytical methods (tga, dta) often enable definite identification of the type of asbestos fibers (Fig. 7). For example, the strong exotherm observed with chrysotile at 830°C can be used as a routine indicator for determining the chrysotile content of talc (4,10). Thermal methods are also usefiil for determining certain mineral contaminants of asbestos fibers, for example bmcite and calcite in chrysotile. 

Infrared (in) spectrometers are gaining popularity as detectors for gas chromatographic systems, particularly because the Fourier transform iafrared (ftir) spectrometer allows spectra of the eluting stream to be gathered quickly. Gc/k data are valuable alone and as an adjunct to gc/ms experiments. Gc/k is a definitive tool for identification of isomers (see Infrared and raman spectroscopy). 

Certain commercial materials and equipment may be identified in the article for adequate definition of subject matter. In no instance does such identification imply recommendation or endorsement by the National Institute of Standards and Technology, or that the material or equipment is necessarily the best available for the purpose. 

Instead of conversion, some producers prefer to use other identifications of severity, including coil outlet temperature, propylene to methane ratio, propylene to ethylene ratio, or cracking severity index (33). Of course, all these definitions are somewhat dependent on feed properties, and most also depend on the operating conditions. 

Pumping and heat exchange form part of a functional unit. Tn-process storage is ignored, but large storage requirements for raw materials, intermediates, or products are usually estimated separately. Sometimes there are difficiilties in the identification and definition of the functional units involved in a process. 

In order to establish consensus on the scope of the endocrine disrupter issue, to facilitate the identification of active chemicals and, ultimately, to underpin any future regulatory control, it is essential to agree a precise definition of an endocrine disrupter (ED). Such a definition was proposed at a major European Workshop on EDs. ... 

When the gas chromatograph is attached to a mass spectrometer, a very powerful analytical tool (gas chromatography-mass spectrometry, GC-MS) is produced. Vapour gas chromatography allows the analyses of mixtures but does not allow the definitive identification of unknown substances whereas mass spectrometry is good for the identification of a single compound but is less than ideal for the identification of mixtures of... 

The most useful application of ISS is in the detection and identification of sur-fece contamination, which is one of the major causes of product failures and problems in product development. The surface composition of a solid material is almost always different than its bulk. Therefore, surface chemistry is usually the study of unknown surfaces of solid materials. To better understand the concept of surface analysis, which is used very loosely among many scientists, we must first establish a definition for that term. This is particularly Important when considering ISS... 

Contracts with the federal government require compliance with Executive Order Nos. 11625 and 12138 to utilize small and small disadvantaged businesses. The contractor/subcontractor must complete a copy of the representations and certifications providing self-certification of business classification under existing federal definitions. The representations and certifications also provide tax identification information required by the Internal Revenue Service. The original of the representation and certification form should be sent to regional purchasing and a copy included in the project file. 

The Severe Accident Policy Statement formulates systematic safety examinations for detection of accident vulnerabilities and implementation of cost-effective changes. The NRC issued Generic Letter 88-20 to implement this plan through IPEs. While the primary goal was the identification of plant vulnerabilities, no definition of vulnerability was provided. Only 4 operators of BWRs identified vulnerabilities and only 16 operators of PWRs did so. Over 500 plant improvements were identified, but few vulnerabilities were. 

In spite of numerous advances in the field of detection there are not and never have been any genuinely substance-specific chemical detection reactions. This means that, unlike the spectrometric methods, the methods of detection normally employed in chromatography cannot be employed for an unequivocal identification of compounds, they can only provide more or less definite indications for the characterization of the separated substances. Universal reagents are usually employed for a first analysis of the separation of samples of unknowns. This is then followed by the use of group-specific reagents. The more individual the pieces of information that can be provided from various sources for a presumed substance the more certainly is its presence indicated. However, all this evidence remains indicative it is not a confirmation of identity. 

The Center for Chemical Process Safety s projects fall into a number of general topic areas that comprise a comprehensive program. These topic areas include identification of hazards and analysis of risks, prevention and mitigation of the hazards identified, and better definition of areas affected by a release of hazardous materials. This book is the latest in the series dealing with hazard identification and risk analysis. 

The presence of iminium salts can be detected by chemical means or by spectroscopic methods. The chemical means of detecting iminium salts are reactions with nucleophiles and are the subject of this review. The spectroscopic methods are more useful for rapid identification because with the large number of model compounds available now the spectroscopic methods are fast and reliable. The two methods that are used primarily are infrared and nuclear magnetic resonance spectroscopy. Some attempts have been made to determine the presence of iminium salts by ultraviolet spectroscopy, but these are not definitive as yet (14,25). 

Hazard identification is defined as tlie process of determining whetlier human exposure to an agent could cause an increase in the incidence of a health condition (cancer, birtli defect, etc.) or whetlier exposure to nonliumans, such as fish, birds, and otlier fonns of wildlife, could cause adverse effects. Hazard identification cliaracterizes tlie liazard in terms of tlie agent and dose of the agent. Since tliere are few hazardous chemicals or hazardous agents for wliich definitive exposure data in humans exists, tlie identification of health hazards is often characterized by the effects of health hazards on laboratory test animals or other test systems. ... 

Definitive identification of lysine as the modified active-site residue has come from radioisotope-labeling studies. NaBH4 reduction of the aldolase Schiff base intermediate formed from C-labeled dihydroxyacetone-P yields an enzyme covalently labeled with C. Acid hydrolysis of the inactivated enzyme liberates a novel C-labeled amino acid, N -dihydroxypropyl-L-lysine. This is the product anticipated from reduction of the Schiff base formed between a lysine residue and the C-labeled dihydroxy-acetone-P. (The phosphate group is lost during acid hydrolysis of the inactivated enzyme.) The use of C labeling in a case such as this facilitates the separation and identification of the telltale amino acid. 

The above considerations indicate the complex nature of the hydrocarbons known as caryophyllene. For practical purposes, however, the compounds indicated are obtained of practically definite melting-points, and, in spite of the complicated isomerism existing amongst most of them, are useful for identification of the sesquiterpene or mixture of sesquiterpenes, occurring naturally and known as caryophyllene . 

It is important to recognize that the following analytical methods essentially determine EO-PO ratio ( H NMR, IR, cleavage methods) or even simply alkylene oxide content (compleximetric methods) of the analyte, and as such are not specific quantitative or qualitative methods for poloxamers, since EO-PO copolymers of a different structure (for instance, random copolymers, or PO-EO-PO block copolymers) may respond to the methods in a way indistinguishable from poloxamers. The principal technique that permits definitive identification of a sample as a poloxamer is C NMR, which allows structural details, such as the distribution of EO and PO units along the polymer chain, to be elucidated [10]. 

Historical Introduction and Perchlorates in General History. The early history of perchlorates and the perchlorate mdustryhas been thoroughly discussed (Refs 12 14, p 2), so it will be only briefly reviewed here. Early exptl work on chlorates and perchlorates was closely tied to the discovery and identification of Cl. Several workers, notably Priestly, Lavoisier, and Scheele reported the isolation of volat liqs and gases which probably were oxides or oxyacids of Cl, but they failed to identify and characterize the compds isolated. Scheele, for example, treated muriatic ac (HCl) with Mn dioxide and obtained a volat liq which he called muriatic ac derived of its phlogiston (Ref 14, p3). The first perchlorate definitely identified was the K salt which was prepd by Stadion in 1816 by the thermal decompn of K chlorate (Ref 2). From this he prepd a hydrate of perchloric ac by heating the K salt with sulfuric ac (Ref 3). Pure (anhyd) perchloric ac was first prepd by Roscoe in 1862 by distn of the hydrated ac (Ref 4)... 

Although a number of solid compounds of plutonium were synthesized by ultramicrochemical techniques during our first year and a half at the Metallurgical Laboratory, it was not until November, 1943 that a positive identification of a crystal structure was made. W. H. Zachariasen joined the project in the fall of 1943 and very soon began to make definitive identifi-... 

Manley-Harris and Richards (Missoula, Montana) have compiled a comprehensive account of the dianhydrides of D-fructose and related compounds, more than 30 in all. These compounds, several of which are of importance in the sugar industry, have in the past presented significant problems in their chemical characterization. Their chemistry was surveyed as early as 1945 by McDonald in Volume 2 of this series, and discussed again in Volume 22 by Verstraeten. The current article furnishes detailed NMR data for each of the anhydrides, providing definitive reference data for accurate identification and correlation with earlier literature, where erroneous structural attributions are rather frequent. 

Although clinical examination provides important clues to diagnosis of congenital myopathies, ultrastructural and histochemical examination of muscle biopsies provides the key to definitive identification. Most of the congenital myopathies... 

A system is a convenient concept that is used to describe how the individual parts of anything (a system) are perceived to interact. System concepts are used by many disciplines and may form a common framework to support global environmental studies. A system definition must start with the identification of the boundaries of the system of interest. Next, the inputs and outputs to that system must be identified. The inputs and outputs of subsystems are the conventional linkages to other subsystems and facilitate the integration of any part of the system into the whole. As discussed previously, it is important that a common and consistent set of units be selected to describe these inputs and outputs. Once the inputs and outputs... 

---