Fibers, definition

The Textile Eiber Product Identification Act (TEPIA) requires that the fiber content of textile articles be labeled (16). The Eederal Trade Commission estabhshed and periodically refines the generic fiber definitions. The current definition for a polyester fiber is "A manufactured fiber ia which the fiber-forming substance is any long-chain synthetic polymer composed of at least 85% by weight of an ester of a substituted aromatic carboxyUc acid, including but not restricted to terephthalate units, and para substituted hydroxyben2oate units."... 

Synonyms Graphite fiber PAN carbon fiber Pitch carbon fiber Definition Made from rayon, polyacrylonitrile, or petrol, pitch avail, in various grades high tensile, high modulus, etc. 

Fiber definition for the purposes of this Directive "fiber" means carbohydrate polymers... 

In order to maintain a definite contact area, soHd supports for the solvent membrane can be introduced (85). Those typically consist of hydrophobic polymeric films having pore sizes between 0.02 and 1 p.m. Figure 9c illustrates a hoUow fiber membrane where the feed solution flows around the fiber, the solvent—extractant phase is supported on the fiber wall, and the strip solution flows within the fiber. Supported membranes can also be used in conventional extraction where the supported phase is continuously fed and removed. This technique is known as dispersion-free solvent extraction (86,87). The level of research interest in membrane extraction is reflected by the fact that the 1990 International Solvent Extraction Conference (20) featured over 50 papers on this area, mainly as appHed to metals extraction. Pilot-scale studies of treatment of metal waste streams by Hquid membrane extraction have been reported (88). The developments in membrane technology have been reviewed (89). Despite the research interest and potential, membranes have yet to be appHed at an industrial production scale (90). 

Originally, the word rayon was appHed to any ceUulose-based man-made fiber, and therefore included the cellulose acetate fibers. However, the definition of rayon was clarified in 1951 and includes textiles fibers and filaments composed of regenerated cellulose and excludes acetate. In Europe the fibers are now generally known as viscose the term viscose rayon is used whenever confusion between the fiber and the cellulose xanthate solution (also called viscose) is possible. 

Each plant or laboratory should adopt definite rules and procedures for electrical iastahations and work. All iastahations should be ia accordance with the National Electrical Code (NEC) for the type of ha2ard, eg. Class I flammable gas or vapor Class II organic, metallic, or conductive dusts and Class III combustible fibers and the degree of process containment, eg. Division 1 open and Division 2 closed (67). Regardless of the flammabiUty of the materials ia the iastaHed operations, changes ia procedure involving use of such materials often occur, sometimes without concurrent alteration of the electrical iastaHation. 

The usual definition of asbestos fiber excludes numerous other fibrous minerals which could be qualified as asbestiform following the criteria Hsted above. However, it appears the term asbestos has traditionally been attributed only to those varieties which are commercially exploited (1,2). 

Thermoanalytical methods (tga, dta) often enable definite identification of the type of asbestos fibers (Fig. 7). For example, the strong exotherm observed with chrysotile at 830°C can be used as a routine indicator for determining the chrysotile content of talc (4,10). Thermal methods are also usefiil for determining certain mineral contaminants of asbestos fibers, for example bmcite and calcite in chrysotile. 

Currendy, the Bauer-McNett classification and the QS test are the most widely used fiber classification techniques. Whereas there are quaUtative relationships between QS and BMN, there is no quantitative correspondence. It is readily understood that these standard tests do not provide accurate definition of the fiber lengths the classification also redects the hydrodynamic behavior (volumes) of the fibers, which, because of thek complex shapes, is not readily predictable. 

Asbestos and other fibers in a wide variety of bundle sizes or even individual fibrils are in commercial usage. The handling of asbestos and other fibers causes degradation of the larger fiber bundles to fibers having diameters less than two micrometers that remain airborne for extended periods of time. These airborne fibers are prone to inhalation and lung entrapment. The exact definition of harmfiil fibers and the mechanism by which they affect the body is not accurately known. 

A polymer blend is a physical or mechanical blend (alloy) of two or more homopolymers or copolymers. Although a polymer blend is not a copolymer according to the above definition, it is mentioned here because of its commercial importance and the frequency with which blends are compared with chemically bonded copolymers. Another technologically significant material relative to the copolymer is the composite, a physical or mechanical combination of a polymer with some unlike material, eg, reinforcing materials such as carbon black, graphite fiber, and glass (see Composite materials). 

Historically, dietary fiber referred to iasoluble plant cell wall material, primarily polysaccharides, not digested by the endogenous enzymes of the human digestive tract. This definition has been extended to iaclude other nondigestible polysaccharides, from plants and other sources, that are iacorporated iato processed foods. Cellulose [9004-34-6] (qv) is fibrous however, lignin [9005-53-2] (qv) and many other polysaccharides ia food do not have fiberlike stmctures (see also Carbohydrates). 

In the dyeing process absorption from the dyebath solution to the fiber eventually stops when an equiHbrium exists between the dye in the fiber phase and the dye in the solution phase. At this point by definition (no movement of dye molecules), therefore... 

Rejection Rejection is defined in Background and Definitions. The highest-rejection membranes are those designed for single-pass production of potable water from the sea. The generally accepted criterion is 99.4 percent rejection of NaCl. Some membranes, notably cellulose triacetate fibers are rated even higher. A whole range of membranes is available as rejection requirements ease, and membranes with excellent chlorine resistance and hydrolytic stability can be made with salt rejection over 90 percent. 

What is the best choice of differential cost function A variety of definitions of the cost function have been proposed. One stems form the highly original work of Fiber and Karplus [38] and Czerminski and Fiber [39], where... 

Using a differential cost function such as that of Fiber and Karplus, the potential energy is averaged over the path by including a factor of 1/L. In other definitions, such as the one employed in the MaxFlux method, there is no such nonnalization. Therefore, if the potential is set to zero, the MaxFlux method will find that the best path is the straight line path connecting reactants and products. However, methods where the differential cost is proportional to 1 /L will find that all paths are equally good. 

---