HMIS Hazardous Materials Identification

Hazardous material (HAZMAT)-. Effective HMIS (hazardous material identification system) and MSDS (material safety data sheet) programs are both essential elements of a safety program The HMIS system identifies and labels substances that may pose some hazard to those who use them. The MSD sheets, provided by the suppliers of materials deemed to be hazardous, are kept on file to quickly identify all hazards and the appropriate responses in emergency situations. This mandated part of a safety program can be handed off to a subteam that ensures the MSDS database in updated and the HMIS labeling program is audited for compliance. 

HMIS Hazardous material identification system. Color-coded labels combined with a numerical designation used to identify potentially hazardous materials. 

A rating system (HMIS - Hazardous Materials Identification System) has been devised by The National Paint Coatings Association to assist emergency responders. The following are the simple explanations of nmnerical symbols. Health 0 - Like ordinary material. 

You might be wondering if there is a simple system for labelling chemicals in the lab that characterizes the hazards at ambient conditions. As a response to the implementation of the Haz Com Standard in 1983, the HMIS (Hazardous Materials Identification System) was developed by the National Paint Coatings Association (now the American Coatings Association). This system bears a striking resemblance to the NFPA system and has a simple rating system (0-4) for health hazard, fire hazard, physical hazard, and personal protection. Unfortunately this is a proprietary system that has seen relatively little adoption but if you see some hazard label that is similar to the NFPA colors, it is probably the HMIS system. 

A Hazardous Materials Identification System (HMIS) for glacial acetic acid. 

A Hazardous Materials Identification System (HMIS) for glacial acetic acid B Definition of the hazard index and personal protection index HMIS is copyrighted by the National Paint and Coatings Association and marketed exclusively through Labelmaster, Chicago, IL... 

The National Paint and Coating Association (NPCA) Label Guide and the Hazardous Materials Identification System (HMIS) are then presented. HMIS is the most comprehensive in-plant hazard communication program developed as a single total integrated system. 

On April 30, 1981, NPCA sent a comprehensive implementation starter kit to each of its members. This manual is the most complete hazard communication system available today. It is identified as NPCA in-plant Hazardous Materials Identification System (HMIS). 

In order to assist NPCA member companies in communicating such health and safety information to their workers. NPCA through the Occupational Health and Safety Task Force (and in conjunction with the Canadian Paint and Coatings Association—CPCA) has developed a Hazardous Materials Identification System (HMIS) for use by the paint manufacturers. The system allows the paint manufacturing industry to quickly and concisely inform their employees about the variety of hazards presented by the large number of raw materials in the plant. 

The system, as described in the first portion of this manuai, is the basic Hazardous Materials Identification System. As noted earlier, it is a flexible system which may stand on its own as a means of worker hazard identification and is also compatible with other existing plant education and training programs. Legislative or regulatory provisions that cail for the special identification of extremely hazardous materials (such as carcinogens) can easily be incorporated into the HMIS. too. 

Most companies using a hazardous materials identification system have found that the best way to affix HMIS labels is to assign a person in the receiving department the responsibility for inventorying and affixing the HMIS labels. This can be accomplished in two ways, as described in c and d. 

CFR1910.1200 41CFR101-42.202(a) through (c) 4.1.3 Identification and Documentation of Hazardous Materials - Actual or potential hazards associated with an excess hazardous material shall be documented with a Material Safety Data Sheet (MSDS) supplied by the manufacturer, distributor or importer. If an MSDS is not available, a Hazardous Materials Identification System (HMIS) record from the automated Department of Defense database is acceptable. If an MSDS or HMIS record is not available, a hazard identification document prepared by the owning DOE organization that meets the MSDS content requirements for hazardous chemicals set forth in the OSHA Hazard Communication Standard (29CFR1910.1200) shall be used. 

There are several forms of warning labels available that provide information about the hazards of chemicals in the workplace. Two of the most commonly used are the Hazardous Material Identification System (HMIS) warning label and the National Fire... 

Hazardous Material Identification System (HMIS) label—A color coded labeling system that warns of the hazards associated with a particular chemical. 

Hazardous Materials Identification System (HMIS). Developed by the National Paint and boatings Association to provide information on the acute health, flammability, and reactivity hazards encountered in the workplace environment when improperly managed possesses at least one of four characteristics ignitability, corrosivity, reactivity, or toxicity, or appears on special EPA lists. 

The health rating is provided on the left at the 9 o clock position and is colored blue. The flammability rating is provided at the top or 12 o clock position and is colored red. The reactivity hazard is provided on the right at the 3 o clock position and is colored yellow. The relative rankings for each hazard are indicated in each quadrant. Special hazard identifiers are provided in the bottom quadrant at the 6 o clock position, which is usually white. Special hazard qualifiers generally include radioactivity, explosives, corrosive, water reactive, oxidizer, etc. The NFPA fire hazard identification scheme is somewhat limited as it only identifies relative potential hazards with the individual material. It does not identify the material itself or all of its potential reactions with other materials. See Figure C.3 for a depiction of this placard. See also Chemical Hazard Label Hazardous Materials Identification System (HMIS ) NFPA 704, Standard System for the Identification of the Hazards of Materials for Emergency Response. 

Identification labels applied to containers of hazardous materials to readily inform employees of their workplace hazards as required under Occupational Safety and Health Administration (OSHA) regulation 29 CFR 1910.1200. They use an easy to understand identification hazard rating. See also Hazardous Materials Identification System (HMIS" ). 

A legislated hazard communication system including labels, Material Safety Data Sheets, and a worker training program. See also Hazardous Materials Identification System (HMIS ). 

In other words, employers may continue to use rating systems such as National Fire Protection Association (NFPA ) 704 diamonds or Hazardous Materials Identification System (HMIS ) III requirements for in-house workplace labels as long as they are consistent with the requirements of the HazCom Standard, and the employees have immediate access to the specific hazard information as discussed above. If you use NFPA or HMIS labeling, you must, through training, ensure that your employees are fully aware of the hazards of the chemicals used. 

The Hazardous Materials Identification System (HMIS) H 3 (serious health hazard) F 1 (slight flammability hazard) R 1 (slight reactivity hazard) (Genium s, 1999)... 

---