Reactions with ethylene

Trifluoromethanesulfonic acid is miscible in all proportions with water and is soluble in many polar organic solvents such as dimethylformamide, dimethyl sulfoxide, and acetonitrile. In addition, it is soluble in alcohols, ketones, ethers, and esters, but these generally are not suitably inert solvents. The acid reacts with ethyl ether to give a colorless, Hquid oxonium complex, which on further heating gives the ethyl ester and ethylene. Reaction with ethanol gives the ester, but in addition dehydration and ether formation occurs. 

Less by-products generated from ethylene reactions with other compounds than from other olefins. 

Ethylene Reaction with NOj Investigation at the laboratory of US Rubber Co (Ref 2) showed that when ethylene was treated with NjO.4 by the method of Levy Scaife (Ref 1), the following compds were obtd ls2-Dinitroe thane Nitroethylnitrate and Nitroethanol... 

Mg+" reacts with alkyl halides in the gas phase via a range of substrate-dependent pathways Not all halides are reactive—examples of unreactive substrates include methyl chloride, vinyl chloride, trichloro and tetrachloro ethylene. Reaction with ethyl chloride proceeds via an elimination reaction (equation 18) followed by a displacement reaction (equation 19). For larger alkyl halides, such as isopropyl chloride, chloride abstraction also occurs (equation 20). For multiply halogenated substrates such as carbon tetrachloride, oxidative reactions occur (equations 21 and 22), although organometallic... 

Onsager inverted snowball theory (Com.) relation to Smoluchowski equation in, 35 relaxation time by, 34 rotational diffusion and, 36 Ozone in the atmosphere, 108 alkene reactions with, 108 Crigee intermediate from, 108 molozonide from, 108 ethylene reaction with, 109 acetaldehyde effect on, 113 formic anhydride from, 110 sulfur dioxide effect on, 113 sulfuric acid aerosols from, 114 infrared detection of, 108 tetramethylethylene (TME) reaction with, 117... 

Condensation polymerization differs from addition polymerization in that the polymer is formed by reaction of monomers, each step in the process resulting in the elimination of some easily removed molecule (often water). E.g. the polyester polyethylene terephthalate (Terylene) is formed by the condensation polymerization (polycondensation) of ethylene glycol with terephthalic acid ... 

Several studies have demonstrated the successful incoriDoration of [60]fullerene into polymeric stmctures by following two general concepts (i) in-chain addition, so called pearl necklace type polymers or (ii) on-chain addition pendant polymers. Pendant copolymers emerge predominantly from the controlled mono- and multiple functionalization of the fullerene core with different amine-, azide-, ethylene propylene terjDolymer, polystyrene, poly(oxyethylene) and poly(oxypropylene) precursors [63,64,65,66,62 and 66]. On the other hand, (-CggPd-) polymers of the pearl necklace type were fonned via the periodic linkage of [60]fullerene and Pd monomer units after their initial reaction with thep-xy y ene diradical [69,70 and 71]. 

Bromine. Slip the glass cover of a jar momentarily aside, add 2-3 ml. of bromine water, replace the cover and shake the contents of the jar vigorously. Note that the bromine is absorbed only very slowly, in marked contrast to the rapid absorption by ethylene. This slow reaction with bromine water is also in marked contrast to the action of chlorine water, which unites with acetylene with explosive violence. (Therefore do not attempt this test with chlorine or chlorine water.)... 

Upon reaction with an alcohol in the presence of a catalyst, the monoalkyl ether of ethylene glycol is obtained ... 

Lithiated indoles can be alkylated with primary or allylic halides and they react with aldehydes and ketones by addition to give hydroxyalkyl derivatives. Table 10.1 gives some examples of such reactions. Entry 13 is an example of a reaction with ethylene oxide which introduces a 2-(2-hydroxyethyl) substituent. Entries 14 and 15 illustrate cases of addition to aromatic ketones in which dehydration occurs during the course of the reaction. It is likely that this process occurs through intramolecular transfer of the phenylsulfonyl group. 

Halothiazoles are usually obtained from 2-aminothiazoles through the Sandmeyer reaction. Nevertheless, ammonolysis has sometimes proved useful for the preparation of 2-aminothiazole derivatives. Detweiler et al. (18) obtained 2-(u-pyridinylamino)thiazole (1) from 2-bromothiazole (Scheme 1). The reaction is easier if a nitro group occupies the 5-position of the thiazole ring (19-21). Ethylene diamine derivatives undergo this reaction with 2-haiothiazoles (22-24). 

Contrast the Diels-Alder reaction with a cycloaddition reaction that looks superfl cially similar the combination of two ethylene molecules to give cyclobutane... 

Ziegler found that adding certain metals or their compounds to the reaction mixture led to the formation of ethylene oligomers with 6-18 carbons but others promoted the for matron of very long carbon chains giving polyethylene Both were major discoveries The 6-18 carbon ethylene oligomers constitute a class of industrial organic chemicals known as linear a olefins that are produced at a rate of 3 X 10 pounds/year m the... 

What IS the principal organic product formed in the reaction of ethylene oxide with each of the following ... 

Diols that bear two hydroxyl groups m a 1 2 or 1 3 relationship to each other yield cyclic acetals on reaction with either aldehydes or ketones The five membered cyclic acetals derived from ethylene glycol (12 ethanediol) are the most commonly encoun tered examples Often the position of equilibrium is made more favorable by removing the water formed m the reaction by azeotropic distillation with benzene or toluene... 

Reactions with Alcohols, Mercaptans, and Phenols. Alcohols add readily to acetaldehyde in the presence of trace quantities of mineral acid to form acetals eg, ethanol and acetaldehyde form diethyl acetal [105-57-7] (65). Similarly, cycHc acetals are formed by reactions with glycols and other polyhydroxy compounds eg, ethylene glycol [107-21-1] and acetaldehyde give 2-methyl-1,3-dioxolane [497-26-7] (66) ... 

Acryhc stmctural adhesives have been modified by elastomers in order to obtain a phase-separated, toughened system. A significant contribution in this technology has been made in which acryhc adhesives were modified by the addition of chlorosulfonated polyethylene to obtain a phase-separated stmctural adhesive (11). Such adhesives also contain methyl methacrylate, glacial methacrylic acid, and cross-linkers such as ethylene glycol dimethacrylate [97-90-5]. The polymerization initiation system, which includes cumene hydroperoxide, N,1S7-dimethyl- -toluidine, and saccharin, can be apphed to the adherend surface as a primer, or it can be formulated as the second part of a two-part adhesive. Modification of cyanoacrylates using elastomers has also been attempted copolymers of acrylonitrile, butadiene, and styrene ethylene copolymers with methylacrylate or copolymers of methacrylates with butadiene and styrene have been used. However, because of the extreme reactivity of the monomer, modification of cyanoacrylate adhesives is very difficult and material purity is essential in order to be able to modify the cyanoacrylate without causing premature reaction. 

Raw Material. PVA is synthesized from acetjiene [74-86-2] or ethylene [74-85-1] by reaction with acetic acid (and oxygen in the case of ethylene), in the presence of a catalyst such as zinc acetate, to form vinyl acetate [108-05-4] which is then polymerized in methanol. The polymer obtained is subjected to methanolysis with sodium hydroxide, whereby PVA precipitates from the methanol solution. 

Polyamines can also be made by reaction of ethylene dichloride with amines (18). Products of this type are sometimes formed as by-products in the manufacture of amines. A third type of polyamine is polyethyleneimine [9002-98-6] which can be made by several routes the most frequently used method is the polymeriza tion of azitidine [151 -56 ] (18,26). The process can be adjusted to vary the amount of branching (see Imines, cyclic). Polyamines are considerably lower in molecular weight compared to acrylamide polymers, and therefore their solution viscosities are much lower. They are sold commercially as viscous solutions containing 1—20% polymer, and also any by-product salts from the polymerization reaction. The charge on polyamines depends on the pH of the medium. They can be quaternized to make their charge independent of pH (18). 

Reactions with Organic Compounds. Tetrafluoroethylene and OF2 react spontaneously to form C2F and COF2. Ethylene and OF2 may react explosively, but under controlled conditions monofluoroethane and 1,2-difluoroethane can be recovered (33). Benzene is oxidized to quinone and hydroquinone by OF2. Methanol and ethanol are oxidized at room temperature (4). Organic amines are extensively degraded by OF2 at room temperature, but primary aHphatic amines in a fluorocarbon solvent at —42°C are smoothly oxidized to the corresponding nitroso compounds (34). 

Another use of hydrogen fluoride, although not in halogen exchange, is the reaction with ethylenes or acetylenes to form the addition products, 1,1-difluoroethane [75-37-6] and vinyl fluoride [75-02-5]-. 

---