Elastomers acetate

The resulting silanol group of a polymer chain condenses with acetoxy siloxy group of another polymer chain to form a siloxane (Si-O-Si) linkage (Scheme 8). Further similar reactions finally result in a crosslinked elastomer. Acetic acid is... 

CAS 6683-19-8 EINECS/ELINCS 229-722-6 Uses Antioxidant, heat stabilizer for org. and polymeric materials, polyolefin, elastomer, acetal, acrylic, PET, PU, PMMA, PVC, food-contact adhesives/coatings/paper/polymers, petrol, prods., coatings Features Nondiscoloring, nonstaining U.S. patents3,285,855 and 3,644, 482... 

Ethylene Acrylic Ethylene Vinyl Hydrogenated Elastomer Acetate Nitrile... 

Gun Propellents. Low sensitivity gun propeUants, often referred to as LOVA (low vulnerabUity ammunition), use RDX or HMX as the principal energy components, and desensitizing binders such as ceUulose acetate butyrate or thermoplastic elastomers (TPE) including poly acetal—polyurethane block copolymers, polystyrene—polyacrjiate copolymers, and glycidyl azide polymers (GAP) to provide the required mechanical... 

A series of compounded flame retardants, based on finely divided insoluble ammonium polyphosphate together with char-forming nitrogenous resins, has been developed for thermoplastics (52—58). These compounds are particularly useful as iatumescent flame-retardant additives for polyolefins, ethylene—vinyl acetate, and urethane elastomers (qv). The char-forming resin can be, for example, an ethyleneurea—formaldehyde condensation polymer, a hydroxyethylisocyanurate, or a piperazine—triazine resin. 

Many synthetic latices exist (7,8) (see Elastomers, synthetic). They contain butadiene and styrene copolymers (elastomeric), styrene—butadiene copolymers (resinous), butadiene and acrylonitrile copolymers, butadiene with styrene and acrylonitrile, chloroprene copolymers, methacrylate and acrylate ester copolymers, vinyl acetate copolymers, vinyl and vinyUdene chloride copolymers, ethylene copolymers, fluorinated copolymers, acrylamide copolymers, styrene—acrolein copolymers, and pyrrole and pyrrole copolymers. Many of these latices also have carboxylated versions. 

Organic peroxides are used in the polymer industry as thermal sources of free radicals. They are used primarily to initiate the polymerisation and copolymerisation of vinyl and diene monomers, eg, ethylene, vinyl chloride, styrene, acryUc acid and esters, methacrylic acid and esters, vinyl acetate, acrylonitrile, and butadiene (see Initiators). They ate also used to cute or cross-link resins, eg, unsaturated polyester—styrene blends, thermoplastics such as polyethylene, elastomers such as ethylene—propylene copolymers and terpolymers and ethylene—vinyl acetate copolymer, and mbbets such as siUcone mbbet and styrene-butadiene mbbet. 

The use of TAG as a curing agent continues to grow for polyolefins and olefin copolymer plastics and mbbers. Examples include polyethylene (109), chlorosulfonated polyethylene (110), polypropylene (111), ethylene—vinyl acetate (112), ethylene—propylene copolymer (113), acrylonitrile copolymers (114), and methylstyrene polymers (115). In ethylene—propylene copolymer mbber compositions. TAG has been used for injection molding of fenders (116). Unsaturated elastomers, such as EPDM, cross link with TAG by hydrogen abstraction and addition to double bonds in the presence of peroxyketal catalysts (117) (see Elastol rs, synthetic). 

Pubhcations on curing polymers with TAIC include TEE—propylene copolymer (135), TEE—propylene—perfluoroaHyl ether (136), ethylene—chlorotrifluoroethylene copolymers (137), polyethylene (138), ethylene—vinyl acetate copolymers (139), polybutadienes (140), PVC (141), polyamide (142), polyester (143), poly(ethylene terephthalate) (144), sdoxane elastomers (145), maleimide polymers (146), and polyimide esters (147). 

Natural mbber comes generally from southeast Asia. Synthetic mbbers are produced from monomers obtained from the cracking and refining of petroleum (qv). The most common monomers are styrene, butadiene, isobutylene, isoprene, ethylene, propylene, and acrylonitrile. There are numerous others for specialty elastomers which include acryUcs, chlorosulfonated polyethylene, chlorinated polyethylene, epichlorohydrin, ethylene—acryUc, ethylene octene mbber, ethylene—propylene mbber, fluoroelastomers, polynorbomene, polysulftdes, siUcone, thermoplastic elastomers, urethanes, and ethylene—vinyl acetate. 

Vinyl Acetate—Ethylene Copolymers. In these random copolymers, the ratio of ethylene to vinyl acetate (EVA) is varied from 30—60%. As the vinyl acetate content increases, the oil and heat resistance increases. With higher ethylene content the physical strength, tensile, and tear increases. The polymers are cured with peroxide. The main properties of these elastomers include heat resistance, moderate oil and solvent resistance, low compression set, good weather resistance, high damping, exceUent o2one resistance, and they can be easily colored (see Vinyl polymers, poly(VINYL acetate)). 

Modifications of epichlorohydrin elastomers by radical-induced graft polymeri2ation have been reported. Incorporated monomers include styrene and acrylonitrile, styrene, maleic anhydride, vinyl acetate, methyl methacrylate, and vinyHdene chloride (81), acryHc acid (82), and vinyl chloride (81,83,84). When the vinyl chloride-modified epichlorohydrin polymers were used as additives to PVC, impact strength was improved (83,84). 

Cellular organic plastics. Elastomer, polystyrene, polyisocyanate, polyisocyanurate, and polyvinyl acetate. 

If polypropylene is too hard for the purpose envisaged, then the user should consider, progressively, polyethylene, ethylene-vinyl acetate and plasticised PVC. If more rubberiness is required, then a vulcanising rubber such as natural rubber or SBR or a thermoplastic polyolefin elastomer may be considered. If the material requires to be rubbery and oil and/or heat resistant, vulcanising rubbers such as the polychloroprenes, nitrile rubbers, acrylic rubbers or hydrin rubbers or a thermoplastic elastomer such as a thermoplastic polyester elastomer, thermoplastic polyurethane elastomer or thermoplastic polyamide elastomer may be considered. Where it is important that the elastomer remain rubbery at very low temperatures, then NR, SBR, BR or TPO rubbers may be considered where oil resistance is not a consideration. If, however, oil resistance is important, a polypropylene oxide or hydrin rubber may be preferred. Where a wide temperature service range is paramount, a silicone rubber may be indicated. The selection of rubbery materials has been dealt with by the author elsewhere. ... 

Among the different pressure sensitive adhesives, acrylates are unique because they are one of the few materials that can be synthesized to be inherently tacky. Indeed, polyvinylethers, some amorphous polyolefins, and some ethylene-vinyl acetate copolymers are the only other polymers that share this unique property. Because of the access to a wide range of commercial monomers, their relatively low cost, and their ease of polymerization, acrylates have become the dominant single component pressure sensitive adhesive materials used in the industry. Other PSAs, such as those based on natural rubber or synthetic block copolymers with rubbery midblock require compounding of the elastomer with low molecular weight additives such as tackifiers, oils, and/or plasticizers. The absence of these low molecular weight additives can have some desirable advantages, such as ... 

Id. Thus, it is expected that in the modified PRP-EVA blend, probably due to interface modification by reactive processing, a transesterification between the pendant MAH group in MAH-PP, and acetate groups in the EVA elastomer, as predicted in reaction Scheme 1, the dispersed rubber particles become more efficient in craze initiation. 

DuPont Acetal EVA Nylon 6, 6/6, 6/12, Mineral Filled 6/6, Industrial PBT PET Polyethylene Modified Thermoplastic Elastomer Ionomer Liquid Crystal Polymer ... 

A number of other polymers have the characteristics of TPE and some are available commercially, such as (1) 1,2-polybutadiene, (2) tran -polyisoprene (PI), (3) modified polyethylene (PE) (e.g., ethylene vinyl acetate [EVA] and ethylene ethyl acrylate [EEA]), (4) nonhydrocarbon elastomer-based TPEs, (5) metallocene elastomers/TPEs (MEs/TPEs), and (6) graft copolymeric TPEs. 

Chattopadhyay S., Chaki T.K., and Bhowmick A.K., New thermoplastic elastomers from poly(ethyle-neoctene) (engage), poly(ethylene-vinyl acetate) and low-density polyethylene by electron beam technology structural characterization and mechanical properties. Rubber Chem. TechnoL, 74, 815, 2001. Roy Choudhury N. and Dutta N.K., Thermoplastic elastomeric natural rubber-polypropylene blends with reference to interaction between the components. Advances in Polymer Blends and Alloys Technology, Vol. 5 (K. Finlayson, ed.), Technomic Publishers, Pensylvania, 1994, 161. 

P.R.208 is also used in polyacrylonitrile spin dyeing. It exhibits excellent textile fastness properties and shows good lightfastness. Full shades (3% pigment concentration) equal step 7 on the Blue Scale, while very light (0.1% pigment) red specimens match step 5. The list of applications includes secondary acetate spin dyeing and mass coloration of polyurethane foam and elastomers. P.R.208 is inert to peroxides. 

Uses Plasticizer for cellulose acetate, nitrocellulose, resins, rubber, elastomers ingredient in lacquers coating agents safety glass insect repellant molding powders perfumes. 

Impact modifiers improve the resistance of materials to stress. Most impact modifiers are elastomers such as ABS, BS, methacrylate-butadiene-styrene, acrylic, ethylene-vinyl acetate, and chlorinated PE. 

Several high-performance or engineering polymers, such as the polyfluo-rocarbons, acetals, ABS, nylons, polyurethanes (PUs), silicones, and phos-phazenes, have been described in previous chapters. Several elastomers, such as butyl rubber, EPDM (elastomeric terpolymer from ethylene, propylene, and a nonconjugated diene), and Neoprene, which play a vital role in engineering, and a host of classic thermosets should also be considered high-performance polymers. The properties of other high-performance polymers are described in this chapter. 

---