Copolymers olefins

Densities and crystallinities of ethylene—a-olefin copolymers mosdy depend on their composition. The classification ia Table 1 is commonly used (ASTM D1248-48). VLDPE resias are usually further subdivided iato PE plastomers of low crystallinity, 10—20%, with densities ia the range of 0.915—0.900 g/cm, and completely amorphous PE elastomers with densities as low as 0.860 g/cm. ... 

Commercial production of PE resias with densities of 0.925 and 0.935 g/cm was started ia 1968 ia the United States by Phillips Petroleum Co. Over time, these resias, particularly LLDPE, became large volume commodity products. Their combiaed worldwide productioa ia 1994 reached 13 X 10 metric t/yr, accouatiag for some 30% market share of all PE resias ia the year 2000, LLDPE productioa is expected to iacrease by 50%. A aew type of LLDPE, compositioaaHy uniform ethylene—a-olefin copolymers produced with metallocene catalysts, was first introduced by Exxon Chemical Company in 1990. The initial production volume was 13,500 t/yr but its growth has been rapid indeed, in 1995 its combiaed production by several companies exceeded 800,000 tons. 

Most Kaminsky catalysts contain only one type of active center. They produce ethylene—a-olefin copolymers with uniform compositional distributions and quite narrow MWDs which, at their limit, can be characterized by M.Jratios of about 2.0 and MFR of about 15. These features of the catalysts determine their first appHcations in the specialty resin area, to be used in the synthesis of either uniformly branched VLDPE resins or completely amorphous PE plastomers. Kaminsky catalysts have been gradually replacing Ziegler catalysts in the manufacture of certain commodity LLDPE products. They also faciUtate the copolymerization of ethylene with cycHc dienes such as cyclopentene and norhornene (33,34). These copolymers are compositionaHy uniform and can be used as LLDPE resins with special properties. Ethylene—norhornene copolymers are resistant to chemicals and heat, have high glass transitions, and very high transparency which makes them suitable for polymer optical fibers (34). 

Chromium Oxide-Based Catalysts. Chromium oxide-based catalysts were originally developed by Phillips Petroleum Company for the manufacture of HDPE resins subsequendy, they have been modified for ethylene—a-olefin copolymerisation reactions (10). These catalysts use a mixed sihca—titania support containing from 2 to 20 wt % of Ti. After the deposition of chromium species onto the support, the catalyst is first oxidised by an oxygen—air mixture and then reduced at increased temperatures with carbon monoxide. The catalyst systems used for ethylene copolymerisation consist of sohd catalysts and co-catalysts, ie, triaLkylboron or trialkyl aluminum compounds. Ethylene—a-olefin copolymers produced with these catalysts have very broad molecular weight distributions, characterised by M.Jin the 12—35 and MER in the 80—200 range. 

The use of TAG as a curing agent continues to grow for polyolefins and olefin copolymer plastics and mbbers. Examples include polyethylene (109), chlorosulfonated polyethylene (110), polypropylene (111), ethylene—vinyl acetate (112), ethylene—propylene copolymer (113), acrylonitrile copolymers (114), and methylstyrene polymers (115). In ethylene—propylene copolymer mbber compositions. TAG has been used for injection molding of fenders (116). Unsaturated elastomers, such as EPDM, cross link with TAG by hydrogen abstraction and addition to double bonds in the presence of peroxyketal catalysts (117) (see Elastol rs, synthetic). 

Ethylene-cyclo-olefin copolymers have been known since 1954 (DuPont USP2 721 189) but these materials only became of importance in the late 1990s with the development of copolymers of ethylene and 2-norbomene by Hoechst and Mitsui using metallocene technology developed by Hoechst. The product is marketed as Topas by Ticona. By adjustment of the monomer ratios polymers with a wide range of Tg values may be obtained including materials that are of potential interest as thermoplastic elastomers. This section considers only thermoplastic materials, cyclo-olefins of interest as elastomers are considered further in Section 11.10. 

FLEXOMER , resins (olefin copolymers), 69 Flexsys N.V., 144 FLORA , trifluralin, 69... 

U. Moll and M. Lux, Manufacture of ethylene/alpha olefin copolymers with metallocene catalysts in slurry loop... 

A current example of the use of a polyester resin as a proplnt binder is the patd compn of Cohen and Scotoni (Ref 32b). In this formulation conventional polyester-olefinic copolymers are used (50,1) together with NG (42.5), tri-acetin (2.7), adiponitrile (2.7), PbO (0.5) and acetylsalicyKc acid (1.5%) to obtain 27 and 152mm caseless ammo... 

Advanced computational models are also developed to understand the formation of polymer microstructure and polymer morphology. Nonuniform compositional distribution in olefin copolymers can affect the chain solubility of highly crystalline polymers. When such compositional nonuniformity is present, hydrodynamic volume distribution measured by size exclusion chromatography does not match the exact copolymer molecular weight distribution. Therefore, it is necessary to calculate the hydrodynamic volume distribution from a copolymer kinetic model and to relate it to the copolymer molecular weight distribution. The finite molecular weight moment techniques that were developed for free radical homo- and co-polymerization processes can be used for such calculations [1,14,15]. 

With the growing interest for the polynorbomene, photoresist polymer, and cyclic olefin copolymer, the synthesis norbornene or bicyclo[2,2,l]-2-heptene (NBN) has drawn significant attention because it is one of the most important precursor for these materials. Norbornene is produced by the reaction between ethylene and cyclopentadiene (CPD) via the Diels-Alder condensation process at elevated temperature and pressure [1,2]. 

The ability to control the polymer from the design of the catalyst, coupled with high catalytic efficiency has led to an explosion of commercial and academic interest in these catalysts. Exxon started up a 30 million lb/5rr ethylene copol3rmer demonstration plant in 1991 using a bis-cyclopentadienyl zirconium catalyst of structure 1. The Dow Chemical Company (Dow) began operating a 125 million Ib/yr ethylene/l-octene copolymer plant in 1993 and has since expanded production capacity to 375 million Ib/yr. This paper will focus on the structure / property relationships of the catalysts used by Dow to produce single-site ethylene a-olefin copolymers. 

These are some key advantages that the metallocene catalysts have over conventional Ziegler-Natta catalysts and hence it is highly probable that inter-and intra-chain heterogeneity expected in ethylene-a-olefins copolymers can be controlled through the use of the metallocene system. 

Cyclic olefin-based resists, 15 180 Cyclic olefin copolymers (COCs), 10 180 properties of, 10 181t Cyclic olefin-maleic anhydride (COMA) copolymers, 15 177 Cyclic olefin polymers (COP), 10 180 26 945... 

Ethylene-alkyne metathesis, 26 955-956 Ethylene-a-olefin copolymers,... 

Cyclic olefin copolymers or cyclic olefin polymers (COC or COP)... 

Cyclic olefin copolymers are copolymerized from linear and cyclic (norbornene) olefins (as shown in Figure 4.21) followed by hydrogenation of double bonds. 

Polycyclic olefin copolymers target optical, medical and electronic applications. 

---