Branding of products

I rely on the fact that I buy [this brand of] products. They re a big company so they should be environmentally responsible. I rely upon their expertise to put these products on my lawn. 

The site of application for fentanyl patches (an analgesic) depends on the brand of product used. Read the individual patient information leaflet for more details. 

Complementary (or alternative) medical approaches are used widely by women to treat menstruation-related disorders. " Daily supplementation of vitamins, minerals, and calcium, along with a well-balanced diet, is the first-line therapy for all menstruation-related disorders and helps to reduce deficiency states, particularly in peri-and postmenopausal women. Vitamin E supplementation in doses of 300 and 400 lU/day may be effective in relieving some premenstrual symptoms based on a few controlled studies.Over-the-counter products that contain megadoses of vitamins, as well as minerals and trace elements, have been marketed for PMS without chnical trials to document their effectiveness or safety. There are several brands of products for PMS (e.g., a combination preparation of a rmld diuretic. 

The reason identifications numbers are created is so that the information they represent can be more easily stored, retrieved, and transmitted. Recall the 12-digit Version A UPC codes discussed in Chapter 2. In a 12-digit UPC 01-0203040506-070809010011-< 12. the first digit oi, which is the number system character, identifies the type of product (the values are given in Table 2.1). The second set of numbers 0203040506 identifies the manufacturer. The third set of numbers 070809010011 identifies the product, and the last digit oi2 is the check digit. Through the UPC, stores can track inventory and identify which types and brands of products are the best (and worst) sellers. 

Figure 4 Thin iayer chromatograms of oxidative dyes remaining in human hair. Capitai ietters (A-H) are assigned to indicate the companies of dye products. Numbers (1-6) indicate brands of products. TLC piate Siiica-gei 60 (20 x 20 cm, 0.25 mm thickness, purchased from Merck Co.) deveioping soivent chloro-form-ethyi acetate-methanoi (6 3.5 0.5, v/v).

Indeed, in the case of hazardous chemicals, it is advisable to contact the CPC supplier to know the actual resistance of the specific brand of product. 

The leading manufacturers in the poHsh categories are S. C. Johnson Son, Inc., Reckitt Coleman, Sara Lee, Scotts Liquid Gold, Turtle Wax, and Alberto Culver for furniture poHshes S. C. Johnson Son, Inc, and L F Products for household floor poHshes S. C. Johnson Son, Inc., Pioneer-EcHpse, Spartan Chemical, HiHyard Chemical Co., and Butcher Co. for industrial and institutional floor poHshes Turtle Wax, Armor AH, Eirst Brands, Kit Products of Northern Labs, Meguires, Blue Coral, and Nu-Finish for automotive poHshes and Kiwi for shoe poHshes (68—72). 

Pha.rma.ceutica.1 Purity. A safety profile of a generic dmg can differ from that of the brand-name product because different impurities may be present in each of the dmgs (154). Impurities can arise out of the manufacturing processes and may be responsible for adverse interactions that can occur. Eor example, serious adverse reactions (LyeU syndrome) were observed upon the use of isoxicam in 1985. These seemed to have resulted from trace elements of a manufacturing by-product that was within the manufacturing quaUty control specifications. 

Based on brand name products, the total number of branded substitute and imitation dairy products worldwide is estimated to exceed 1000. Almost all multinational food companies market one or more dairy substitutes. 

It is satisfactory to use the Super-Cel brand of kieselguhr supplied by Johns-Manville Company and asbestos of the type used in Gooch crucibles. Inclusion of these inert materials facilitates mixing and extraction of the product. 

No dimensional change Proprietary brands of alkaline cleaners may be used provided these do not attack metal Soda ash with washing soda and soap are suitable for preparing alkaline cleaning baths No dimensional change unless much impurity is present For small delicate parts 0 1-0-5% silver chromate may be added to reduce attack caused by impurities such as chloride in corrosion product... 

Do not change from one brand of nitrates to anodier without consulting your pharmacist or primary care provider. Products manufactured by different companies may not be equally effective. 

A survey of 20 brands of typographical correction fluids found that several contained 10% or less trichloroethylene, although other volatile organic compounds present at higher levels probably posed a greater hazard to people using these products (Ong et al. 1993). Various other consumer products have been found to contain trichloroethylene, such as paint removers, strippers, adhesives, and lubricants (Frankenberry et al. 1987). 

Provide design and use tools that are locked to the supplier product. Some catalyst companies provide sophisticated computing models to their customers that enable their customers to optimise their processes and achieve maximum efficiency. These computer models are provided with extensive data sets that only relate to the supplier s own brand of catalyst. 

There is no evidence that one LT4 product is better than another. However, given the likelihood that these products do have different bioavailabilities, patients should be maintained on the same LT4 product. Given the generic substitution regulations of most states, this is best accomplished by prescribing a brand-name product. The prescriber should not allow substitution in the way mandated by state regulations. 

Other brand and product names are registered trademarks or trademarks of their respective companies. 

Consumption of sweet chocolate in the U.S. is low. The majority of chocolate consumed is milk chocolate produced from chocolate liquor, sugar, cocoa butter, and milk solids. Because most milk chocolate produced in the U.S. contains 10 to 12% chocolate liquor, differences in methylxanthine content among commercial milk chocolate are due more to the varieties and blends of cocoa bean (Table 9). Based on analytical data from seven brands of commercial milk chocolate, a typical 40-g milk chocolate bar contains approximately 65 mg theobromine and less than 10 mg caffeine.28 Milk chocolate bars containing other ingredients, such as peanuts, almonds, and confectionery fillings, obviously contain less methylxanthines. In a survey of 49 marketed chocolate and confectionery products, theobromine concentrations ranged from 0.001 to 2.598% and caffeine content from 0.001 to 0.247%.33... 

Chemical analysis of the finished food product is a more accurate determination of the methylxanthine content. In studies performed at Hershey Foods Corporation, the methylxanthine content of a large variety of commercially available chocolate foods was measured by HPLC methods.38 These results have been compiled together with other literature values in Table 11. Large methylxanthine variations can be seen among the chocolate foods, as well as within different brands of the same item. 

In many products it seems highly probable that there exists a narrow range of optimum moisture contents that should be maintained. More specifically, the effect of moisture on MCC-containing tablets has been the subject of an investigation that demonstrates the sensitivity of this important excipient to moisture content [10]. These researchers found that differences exist in both the cohesive nature and the moisture content to two commercial brands of MCC. A very useful report on the equilibrium moisture content of some 30 excipients has been compiled by a collaborative group of workers from several pharmaceutical companies and appears in the Handbook of Pharmaceutical Excipients [11,12],... 

Smell, taste, texture, and aftertaste, therefore, are important factors in the development of pediatric dosage forms. In a study of six brands of OTC chewable vitamins, flavor type and intensity, soft texture, and short aftertaste were critical factors in product preference. The flavor and texture attributes of the bestselling product were significantly different from the other brands [97]. 

Standardization is the process by which all batches of a dietary supplement produced by a single manufacturer contain the same amount of active ingredient ) [29]. FDA does not require dietary supplements to be standardized. Consumers cannot be certain of the quality of a dietary supplement when purchased. Uncertainties include whether the herb s active ingredients are in the product, whether the ingredients are bioavailable, whether the dose is appropriate, and whether each batch contains the same components in the same quantity. Each dietary supplement may vary depending on the manufacturer, and therefore switching brands of a particular supplement is not advisable. 

The main aims of this chapter are to provide estimates for the amounts of pollutants emitted from processed electronic waste (e-waste) and assess the magnitudes of human exposure to these pollutants. Specifically in this chapter, e-waste is defined as the sum of discarded personal computers, electronic/electrical equipment, electronic entertainment devices, cell phones, television sets, and refrigerators. In another word, e-waste explicitly refers to electronics at their end of life cycle and disposed by end users rather than surplus electronics (brand new products). In addition, e-waste also does not include reusable (e.g., repairable electronics or second hand electronics) and secondary scraps (e.g., noble metals, plastics, and rubbers). 

---