Saponification Aqueous

With the advent of high resolution proton and carbon nuclear magnetic resonance spectroscopy, however, determining the DS and the DS distribution of mixed ester systems by aqueous saponification has become obsolete. Numerous studies have shown NMR to be a fundamental tool for probing the microscopic behavior of a... 

It was not until the introduction cf aqueous saponification that the perfecting of the production of pure glycerine on a manufacturing scale was satisfactorily accomplished so that there is in existence in coni-merce true glycerine, which can be regarded as chemically pure and coiisists really only of glycerine and water. 

A selection of important anionic surfactants is displayed in table C2.3.1. Carboxylic acid salts or tire soaps are tire best known anionic surfactants. These materials were originally derived from animal fats by saponification. The ionized carboxyl group provides tire anionic charge. Examples witlr hydrocarbon chains of fewer tlran ten carbon atoms are too soluble and tliose witlr chains longer tlran 20 carbon atoms are too insoluble to be useful in aqueous applications. They may be prepared witlr cations otlrer tlran sodium. 

Saponification of esters. Aqueous sodium hydroxide method. To hydrolyse an ester of an alcohol, reflux 5-6 g. with 50 ml. of 20 per cent, sodium hydroxide solution for 1-2 hours or until the ester layer disappears. Distil the alkahne mixture and collect about 6 ml. of distillate. This will contain any volatile alcohol formed in the saponification. If the alcohol does not separate, i.e., is water-soluble, saturate the distillate with sohd potassium carbonate an upper layer of alcohol is then usually formed. (The alcohol may be subsequently identified as the 3 5-dinitrobenzoate see Section 111,27,2.) Cool the residual alkahne mixture, and acidify it with dilute sulphuric acid. If no crystalline acid is precipitated, the acid may frequently be isolated by ether extraction, or it may be distilled from the acidified solution and isolated from (or investigated in) the distfllate. (The acid may be subsequently identified, e.g., as the S benzyl wo-thiuronium salt see Section 111,85,2.)... 

Cydopentane reagents used in synthesis are usually derived from cyclopentanone (R.A. Ellison, 1973). Classically they are made by base-catalyzed intramolecular aldol or ester condensations (see also p. 55). An important example is 2-methylcydopentane-l,3-dione. It is synthesized by intramolecular acylation of diethyl propionylsucdnate dianion followed by saponification and decarboxylation. This cyclization only worked with potassium t-butoxide in boiling xylene (R. Bucourt, 1965). Faster routes to this diketone start with succinic acid or its anhydride. A Friedel-Crafts acylation with 2-acetoxy-2-butene in nitrobenzene or with pro-pionyl chloride in nitromethane leads to acylated adducts, which are deacylated in aqueous acids (V.J. Grenda, 1967 L.E. Schick, 1969). A new promising route to substituted cyclopent-2-enones makes use of intermediate 5-nitro-l,3-diones (D. Seebach, 1977). 

Animal fats and vegetable oils are triacylglycerols, or triesters, formed from the reaction of glycerol (1,2, 3-propanetriol) with three long-chain fatty acids. One of the methods used to characterize a fat or an oil is a determination of its saponification number. When treated with boiling aqueous KOH, an ester is saponified into the parent alcohol and fatty acids (as carboxylate ions). The saponification number is the number of milligrams of KOH required to saponify 1.000 g of the fat or oil. In a typical analysis, a 2.085-g sample of butter is added to 25.00 ml of 0.5131 M KOH. After saponification is complete, the excess KOH is back titrated with 10.26 ml of0.5000 M HCl. What is the saponification number for this sample of butter ... 

MetaUic ions are precipitated as their hydroxides from aqueous caustic solutions. The reactions of importance in chlor—alkali operations are removal of magnesium as Mg(OH)2 during primary purification and of other impurities for pollution control. Organic acids react with NaOH to form soluble salts. Saponification of esters to form the organic acid salt and an alcohol and internal coupling reactions involve NaOH, as exemplified by reaction with triglycerides to form soap and glycerol,... 

Paste rosin sizes are supplied as viscous pastes containing 60—80% solids. These sizes may contain unmodified or fortified rosin that has reacted (ie, been fortified) with either maleic anhydride [108-31-6] or fumaric acid [110-17-8] (see Fig. 3). In either case, the unmodified or fortified rosin is treated with aqueous alkaH so that the degree of neutralization, ie, saponification, varies from 75—100% depending on the physical state desired for the commercial product. Before use, the paste size must be converted to a stable, dilute rosin size emulsion by careful sequential dilution with warm water foUowed by cold water, with good agitation. 

Uses. AEyl chloride is industrially the most important aHyl compound among all the aHyl compounds (see Chlorocarbons and CHLOROHYDROCARBONS, ALLYL CHLORIDE). It is used mosdy as an intermediate compound for producing epichlorohydrin, which is consumed as a raw material for epoxy resins (qv). World production of AC is approximately 700,000 tons per year, the same as that of epichlorohydrin. Epichlorohydrin is produced in two steps reaction of AC with an aqueous chlorine solution to yield dichloropropanol (mixture of 1,3-dichloropropanol and 2,3-dichloropropanol) by chlorohydrination, and then saponification with a calcium hydroxide slurry to yield epichlorohydrin. 

Epoxid tion. Epoxidation, also referred to as saponification or dehydrochlorination, of propylene chlorohydrin (both isomers) to propylene oxide is accompHshed using a base, usually aqueous sodium hydroxide or calcium hydroxide. 

Carboxylate soaps are most commonly formed through either direct or indirect reaction of aqueous caustic soda, ie, alkaH earth metal hydroxides such as NaOH, with fats and oils from natural sources, ie, triglycerides. Fats and oils are typically composed of both saturated and unsaturated fatty acid molecules containing between 8 and 20 carbons randomly linked through ester bonds to a glycerol [56-81-5] backbone. Overall, the reaction of caustic with triglyceride yields glycerol (qv) and soap in a reaction known as saponification. The reaction is shown in equation 1. 

Commercially, soap is most commonly produced through either the direct saponification of fats and oils with caustic or the hydrolysis of fats and oils to fatty acids followed by stoichiometric (equal molar) neutralization with caustic. Both of these approaches yield workable soap in the form of concentrated soap solutions (- 70% soap). This concentration of soap is the target on account of the aqueous-phase properties of soap as well as practical limitations resulting from these properties. Hence, before discussing the commercial manufacturing of soap, it is imperative to understand the phase properties of soap. 

The standard chemical and biological methods of analysis are those accepted by the JnitedStates Pharmacopeia XXIII as well as the ones accepted by the AO AC in 1995 (81—84). The USP method involves saponification of the sample (dry concentrate, premix, powder, capsule, tablet, or aqueous suspension) with aqueous alcohoHc KOH solvent extraction solvent removal chromatographic separation of vitamin D from extraneous ingredients and colormetric deterrnination with antimony trichloride and comparison with a solution of USP cholecalciferol reference standard. 

Class (2) reactions are performed in the presence of dilute to concentrated aqueous sodium hydroxide, powdered potassium hydroxide, or, at elevated temperatures, soHd potassium carbonate, depending on the acidity of the substrate. Alkylations are possible in the presence of concentrated NaOH and a PT catalyst for substrates with conventional pX values up to - 23. This includes many C—H acidic compounds such as fiuorene, phenylacetylene, simple ketones, phenylacetonittile. Furthermore, alkylations of N—H, O—H, S—H, and P—H bonds, and ambident anions are weU known. Other basic phase-transfer reactions are hydrolyses, saponifications, isomerizations, H/D exchange, Michael-type additions, aldol, Darzens, and similar... 

Poly(vinyl alcohol). Poly(vinyl alcohol) (see Vinyl polymers) is more easily prepared, in a form that can be filtered and washed in a practical way, by alcoholysis of poly(vinyl acetate), than by its saponification in an aqueous system ... 

Ba.sic Hydrolysis. Throughout most of history, soap was manufactured by boiling an ester with aqueous alkaU. In this reaction, known as saponification, the ester is hydroly2ed with a stoichiometric amount of alkaU. The irreversible formation of carboxylate anion drives the reaction to completion. 

Cellobiose was prepared first by Skraup and Konig by the saponification of the octaacetate with alcoholic potassium hydroxide, and the method was improved by Pringsheim and Merkatz.3 Aqueous barium hydroxide also has been employed for the purpose, and methyl alcoholic ammonia has been used extensively for the hydrolysis of carbohydrate acetates. The method of catalytic hydrolysis with a small quantity of sodium methylate was introduced by Zemplen,i who considered the action to be due to the addition of the reagent to the ester-carbonyl groups of the sugar acetate and the decomposition of the addition compound by reaction with alcohol. The present procedure, reported by Zemplen, Gerecs, and Hadacsy, is a considerable improvement over the original method (see Note 2). 

Suitable organic solvents, such as ether, benzene, naphtha and the like, are more soluble than in water. This makes it possible to separate them from other substances which may accompany them in the water solution but which are not soluble in the solvents employed. Hence, one application of solvent extraction is the analytical determination of unsaponifiable oils and waxes in admixture with fatty material by submitting the mixture to vigorous saponification with alcoholic potash or, if necessary, sodium ethylate, and to dilute the product with water and extract with petroleum ether. The soaps remain in the aqueous solution while the unsaponifiable oils and waxes dissolved in the ether. The addition of a salt to an aqueous solution prior to extraction is sometimes practiced in some processes. In older processes, SOj is employed in the separation of aromatic and highly saturated hydrocarbons, taking advantage of the much greater solubility of the solubility of the aromatics and... 

In its manufacture, methyl ethyl ketone is condensed with ethylcyanoacetate to give ethyl-2-cyano-3-methyl-2-pentenoate. That, in turn, adds HCN to give ethyl-2,3-dicyano-3-methyl-pentanoate. Saponification and decarboxylation gives 2-methyl-2-ethyl succinonitrile. Heating with aqueous NH3 gives the diamide which loses NHj and cyclizes to ethosuximide. 

The ester (70 g, 0.1 mol) was saponified in a boiling mixture of 250 ml methanol and 250 ml water to which 100 ml N sodium hydroxide solution was added in small batches with stirring. The methanol wasdistilled from the saponification mixture, the residue was mixed with water and extracted with ethyl acetate. The aqueous phase was acidified with hydrochloric acid in the presence of sodium bisulfite. 

I) Refluxing said benzyl ester with an aqueous alcoholic alkali metal hydroxide solution to saponify the benzyl ester group, neutralizing the saponification mixture by the addition of hydrochloric acid, extracting the neutralized mixture with chloroform, and separating the resulting (S,N-ditrityl-L-cysteinyl)-L-proline. 

Saponification deterioration by softening of paint film caused by action of aqueous alkali, resulting from cathodic protection at excessively high current densities, on the fatty-acid constituents of the film. 

Lster hydrolysis occurs through a typical nucleophilic acyl substitution pathway in which hydroxide ion is the nucleophile that adds to the ester carbonyl group to give a tetrahedral intermediate. Loss of alkoxide ion then gives a carboxylic acid, which is deprotonated to give the carboxylate ion. Addition of aqueous HC1 in a separate step after the saponification is complete then pro-tonates the carboxylate ion and gives the carboxylic acid (Figure 21.17). 

The mechanism shown in Figure 21.7 is supported by isotope-labeling studies. When ethyl propanoate labeled with lsO in the ether-like oxygen is hydrolyzed in aqueous NaOH, the l80 label shows up exclusively in the ethanol product. None of the label remains with the propanoic acid, indicating that saponification occurs by cleavage of the C-OR bond rather than the CO—R bond. 

The following reactivity order has been found for the saponification of alkyl acetates by aqueous NaOH. Explain. 

Problem 27.4 I Write the saponification reaction of glyceryl dioleate monopalmitate with aqueous NaOH. 

An important reaction of fats is the reverse of ester formation. They hydrolyze, or react with water, just as disaccharides do. Usually hydrolysis is carried out in aqueous Ca(OH)2, NaOH, or KOH solution. Because of long use in the preparation of soap from fats, the alkaline hydrolysis reaction (6) is called saponification. 

---