Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Analytical group

I began work at Eli Lilly and Company in March 1942 as a laboratory aide in the analytical department. At that time, there was very little sophisticated instrnmentation in the laboratory. The most complex calculations were carried ont nsing a slide rnle. After military service in World War II and an edncational leave of absence to complete my nndergraduate studies in chemistry at Indiana University, I retnrned to the Lilly analytical group in 1947. Slide rnles were still much in evidence bnt were soon augmented with mechanical calcnlators— usually Monroe or Friden models. [Pg.5]

Establish a program to monitor the publications, patents, and announcements of competitors and communicate these to the analytical group. If there is a genuine commitment in the organization to "be the best", a good first step is to recognize the very skilled competition to be faced. [Pg.39]

Technology transfer may involve the transfer of an analytical method from a research group to an analytical group, the transfer of a method from one analytical laboratory to another analytical laboratory or to a quality control... [Pg.47]

Laser Analytics Group, Department of Chemical Engineering and Biotechnology, University of Cambridge, Cambridge, UK Molecular Biophysics Group, Debye Institute, Utrecht University, NL 3508 TA, Utrecht, The Netherlands... [Pg.4]

Most of the continuously monitored water contaminants are determined via gas chromatography-mass spectrometry (GC-MS). However, an adequate separation of polar compounds via GC typically requires derivatization of the polar moieties (e.g., BSTFA derivatives). In addition to this, as the analyte groups show different properties concerning the number and kind of functional groups, it is quite difficult to develop a universal derivatization procedure suitable for all the target analytes. Furthermore, the presence in wastewater of many other organic compounds requires the use of labeled standards, which can make application of this method unfeasible [35]. [Pg.59]

As can be seen from Table 1, the estimated coefficients b[0] are not equal to zero for different samples, whereas the estimated coefficients b[l] are close to 1 within confidence interval. That means that coefficients b[0] estimated for different points of the territory are generalized relative characteristics of elements abundance at the chosen sampling points. Statistical analysis has confirmed that hypotheses Hi and H2 are true with 95% confidence level for the data obtained by any of the analytical groups involved. This conclusion allowed us to verify hypothesis H3 considering that the estimated average variances of the correlation equation (1) are homogeneous for all snow samples in each analytical group. Hypothesis H3... [Pg.143]

Part A describes the information that is to be provided by potential contractors at the time that the ROAME Bs are completed for submission to the Group. Provision of this information will permit any FSA Analytical Group and customers to make an informed assessment and comparison of the analytical quality of the results that will be obtained from the potential contractors bidding for the project. Previously potential contractors have not been given defined guidance on the analytical quality assurance information required of them and this has made comparison between potential contractors difficult. Part A is supplied to potential contractors at the same time as further information about the project is supplied. [Pg.105]

Analysis of the original 29 Wari samples revealed three easily distinguishable chemical groupings, labeled Wari I, 2, and 3, with two samples identified as outliers (labeled Mejia A and Wari-Unas). What remained of this material (20 samples) was subsequently returned to Williams at the Field Museum. We show here a principal components biplot of the INAA data with only 18 samples plotted (Mejia A and Wari-Unas have been excluded for purposes of clarity), showing the three main analytical groupings (Figure 4). [Pg.356]

As a further means of comparing the datasets produced by the two techniques, group means, standard deviation from mean, and percent relative standard deviation from mean were calculated for each measured element as a way of quantifying the amount of dispersion present in each analytical group (Table Ila and b). [Pg.358]

Starting Material. A drum of concentrated, mixed, southern pine kraft black liquor was kindly supplied by the Canton, N. C. mill of the Champion Paper and Fibre Co. Analytical data for the liquor indicated 49.7% total solids and a methoxyl content of the oven-dried solids of 5.54%. The pH of the liquor as received was 12.3. (All melting points are uncorrected. Infrared absorption spectra were determined by Mr. Lowell Sell of The Institute of Paper Chemistry Analytical Group.)... [Pg.161]

The level of sophistication shown in the implementation of the GLP regulations varies greatly between the different laboratories. Most contract laboratories are well into compliance since they perform FDA related GLP studies and have been involved with UA for several years now. Second in rank come the in-house company laboratories who also perform studies for FDA. There has been some information exchange between the toxicology groups and the analytical groups. The rest of the companies, especially those units who do only environmental or residue chemistry studies, are for the most part behind their counterparts, and marry still have a long way to go to catch up. [Pg.97]

Every analyst within an analytical group must be trained in the procedures they conduct, and their proficiency must be documented according to the Laboratory QA Manual. The laboratory must have current SOPs for all performed analytical methods. [Pg.195]

In addition to his work on titrimetry, Gay-Lussac made important contributions in other areas of analytical chemistry. He studied the reactions of hydrogen sulphide in different media, thus laying the foundations for the classification of metals into different analytical groups, and in conjunction with Thenard, he developed the first truly practicable method for the determination of carbon and hydrogen in organic compounds.54... [Pg.157]

Liaises strongly with central Analytical group... [Pg.59]

In this chapter we will discuss current approaches for analytical characterization of combinatorial libraries in a pharmaceutical industry environment. Recently, several analytical groups have presented very similar strategies for analysis of libraries [7-9]. As will be shown later, the key to successful analytical characterization of a combinatorial library is to perform analytical and chemical work in parallel with the library development. The accumulation of data and analytical experience during this process results in an assessment of library quality with a high level of confidence, even if as little as 5-10% of the library components are analyzed. Utilization of the strategy will be demonstrated using two examples analysis of a library synthesized on a robotic station in spatially addressed format and analysis of a library synthesized in accordance with split-and-mix technology. [Pg.240]

Omenn GS, States DJ, Adamski M, Blackwell TW, Menon R, Hermjakob H, et al. Overview of the HUPO plasma proteome project Results from the pilot phase with 35 collaborating laboratories and multiple analytical groups, generating a core dataset of 3020 proteins and a publicly-available database. Proteomics 2005 5(13) 3226-3245. [Pg.141]

Some teachers may prefer not to carry out a complete separation of cations, but to hand out separate unknown mixtures containing cations of one analytical group only. In this case precipitation is made of the particular group reagent (hydrochloric acid, hydrogen sulphide, ammonia, ammonium sulphide or ammonium carbonate) and the precipitate is examined by Group Separation Tables V. 12 to V. 19 as well as V.23 to V.28 for each group respectively. [Pg.552]

The limit of detection (l.o.d.) is the amount of analyte which can be reliably detected under the stated experimental conditions. Although a statistical approach may be adopted in defining exactiy what is reliable and what is not, it is common for individual analytical groups/depart-ments to have a pre-determined policy (drawn up, of course, taking due... [Pg.160]


See other pages where Analytical group is mentioned: [Pg.536]    [Pg.826]    [Pg.21]    [Pg.146]    [Pg.210]    [Pg.211]    [Pg.217]    [Pg.287]    [Pg.4]    [Pg.108]    [Pg.64]    [Pg.278]    [Pg.26]    [Pg.28]    [Pg.687]    [Pg.362]    [Pg.227]    [Pg.52]    [Pg.53]    [Pg.155]    [Pg.471]    [Pg.139]    [Pg.169]    [Pg.191]    [Pg.200]    [Pg.117]    [Pg.329]    [Pg.43]    [Pg.739]    [Pg.209]   
See also in sourсe #XX -- [ Pg.376 , Pg.391 , Pg.529 , Pg.533 , Pg.540 , Pg.545 ]




SEARCH



Analytical Chemistry of Group 2 Metals

Analytical methods for the determination of hydroperoxide groups

Analytical solution of groups

Analytical solution of groups ASOG)

Classification of cations (metal ions) into analytical groups

Ethyl groups, analytical determination

Functional groups analytical determination

Functional groups, analytical reagents

Functional groups, determination AAS, GFAAS and ICP analytical values

Group analytical chemistry

Groups method, analytical

Groups method, analytical solution

Hydroxy groups analytical determination

Methoxy groups, analytical determination

Methyl groups, analytical determination

Pharmaceutical Analytical Science Group

Phenyl groups, analytical determination

Vinyl groups, analytical determination

© 2024 chempedia.info