Acrylonitrile-butadiene epoxy resin

This section focuses on the modification of epoxy resins by blending with acrylonitrile butadiene (nitrile) resins. These are true alloyed blends since the nitrile rubber usually contains no groups that are normally reactive with epoxy groups. The nitrile molecules and the epoxy molecules intermingle as a blend to provide a single-phase alloy. If a large elastomer concentration is used, no phase separation will occur to form precipitates. [Pg.125]

Carboxyl-Terminated Butadiene-Acrylonitrile-Modifl Epoxy Resin and Its Graphite Fiber-Reinforced Composite... [Pg.91]

HONG ET AL. Butadiene-Acrylonitrile-Modified Epoxy Resin... [Pg.93]

Carboxyl-containing butadiene-acrylonitrile copolymers epoxy resins are available in two physical forms. Table 1 lists and characterizes two of the high molecular weight (solid) copolymers of butadiene—acrylonitrile having acid groups distributed randomly in the polymer backbone. Both of these polymers are directly soluble in polar solvents such as methyl ethyl ketone. [Pg.431]

Studies of the particle—epoxy interface and particle composition have been helphil in understanding the mbber-particle formation in epoxy resins (306). Based on extensive dynamic mechanical studies of epoxy resin cure, a mechanism was proposed for the development of a heterophase morphology in mbber-modifted epoxy resins (307). Other functionalized mbbers, such as amine-terminated butadiene—acrylonitrile copolymers (308) and -butyl acrylate—acryhc acid copolymers (309), have been used for toughening epoxy resins. [Pg.422]

Expandable PS Thermoplastic urethane Abietic acid derivatives Polyester fiber Chlorinated polyether resins Butadiene-acrylonitrile copolymers Melamine resin Polyurethane filament Cast epoxy Nylon-6... [Pg.677]

The principal kinds of thermoplastic resins include (1) acrylonitrile-butadiene-styrene (ABS) resins (2) acetals (3) acrylics (4) cellulosics (5) chlorinated polyelliers (6) fluorocarbons, sucli as polytelra-fluorclliy lene (TFE), polychlorotrifluoroethylene (CTFE), and fluorinated ethylene propylene (FEP) (7) nylons (polyamides) (8) polycarbonates (9) poly elliylenes (including copolymers) (10) polypropylene (including copolymers) ( ll) polystyrenes and (12) vinyls (polyvinyl chloride). The principal kinds of thermosetting resins include (1) alkyds (2) allylics (3) die aminos (melamine and urea) (4) epoxies (5) phenolics (6) polyesters (7) silicones and (8) urethanes,... [Pg.1316]

ABA ABS ABS-PC ABS-PVC ACM ACS AES AMMA AN APET APP ASA BR BS CA CAB CAP CN CP CPE CPET CPP CPVC CR CTA DAM DAP DMT ECTFE EEA EMA EMAA EMAC EMPP EnBA EP EPM ESI EVA(C) EVOH FEP HDI HDPE HIPS HMDI IPI LDPE LLDPE MBS Acrylonitrile-butadiene-acrylate Acrylonitrile-butadiene-styrene copolymer Acrylonitrile-butadiene-styrene-polycarbonate alloy Acrylonitrile-butadiene-styrene-poly(vinyl chloride) alloy Acrylic acid ester rubber Acrylonitrile-chlorinated pe-styrene Acrylonitrile-ethylene-propylene-styrene Acrylonitrile-methyl methacrylate Acrylonitrile Amorphous polyethylene terephthalate Atactic polypropylene Acrylic-styrene-acrylonitrile Butadiene rubber Butadiene styrene rubber Cellulose acetate Cellulose acetate-butyrate Cellulose acetate-propionate Cellulose nitrate Cellulose propionate Chlorinated polyethylene Crystalline polyethylene terephthalate Cast polypropylene Chlorinated polyvinyl chloride Chloroprene rubber Cellulose triacetate Diallyl maleate Diallyl phthalate Terephthalic acid, dimethyl ester Ethylene-chlorotrifluoroethylene copolymer Ethylene-ethyl acrylate Ethylene-methyl acrylate Ethylene methacrylic acid Ethylene-methyl acrylate copolymer Elastomer modified polypropylene Ethylene normal butyl acrylate Epoxy resin, also ethylene-propylene Ethylene-propylene rubber Ethylene-styrene copolymers Polyethylene-vinyl acetate Polyethylene-vinyl alcohol copolymers Fluorinated ethylene-propylene copolymers Hexamethylene diisocyanate High-density polyethylene High-impact polystyrene Diisocyanato dicyclohexylmethane Isophorone diisocyanate Low-density polyethylene Linear low-density polyethylene Methacrylate-butadiene-styrene... [Pg.958]

The most common advanced composites are made of thermosetting resins, such as epoxy polymers (the most popular singlematrix material), polyesters, vinyl esters, polyurethanes, polyimids, cianamids, bismaleimides, silicones, and melamine. Some of the most widely used thermoplastic polymers are polyvinyl chloride (PVC), PPE (poly[phenylene ether]), polypropylene, PEEK (poly [etheretherketone]), and ABS (acrylonitrile-butadiene-styrene). The precise matrix selected for any given product depends primarily on the physical properties desired for that product. Each type of resin has its own characteristic thermal properties (such as melting point... [Pg.30]

Functionalized, liquid polybutadiene derivatives have also been developed as hybrid flexiblizers for epoxy resins. Carboxyl-terminated butadiene/acrylonitrile polymers, butadiene homopolymers, and maleic anhydride-amino acid grafted butadiene homopolymers have been used as flexibilizers to impart good low-temperature strength and water resistance to DGEBA-based epoxy adhesives. An epoxy system toughened by polybutadiene with maleic anhydride is claimed to provide a hydrophobic backbone, low viscosity, softness, and high tensile strength and adhesion (Table 7.10). [Pg.133]

The butadiene-acrylonitrile tougheners that have been especially successful in both DGEBA and DGEBF types of epoxy resins are... [Pg.147]

The primary use of TBBPA is as a flame retardant in epoxy resin circuit boards and in electronic enclosures made of polycarbonate-acrylonitrile-butadiene-styrene (PC-ABS). Other applications of TBBPA include its use as a flame retardant for plastics, paper, and textiles as a plasticizer in adhesives and coatings and as a chemical intermediate for the synthesis of other flame retardants (e.g., TBBPA allyl ether). It is also been applied to carpeting and office furniture as a flame retardant. [Pg.182]

The use of rubbers (particularly epoxy-terminated butadiene nitrile, ETBN, rubber or carboxy-termi-nated butadiene acrylonitrile, CTBN, rubber) to toughen thermoset polymers is perhaps the most widely explored method and has been applied with some measure of success in epoxy resins. Phase separation of the second rubbery phase occurs during cure and its incorporation in the epoxy matrix can significantly enhance the fracture toughness of the thermoset. Although the rubber has a low shear modulus, its bulk modulus is comparable to the value measured for the epoxy, ensuring that the rubber inclusions introduced... [Pg.919]

The separate phases will be rich in one component but may have the other present as a minor component. In order to control compatibility the elastomer may have reactive end groups to enhance interfacial adhesion. A common example in epoxy-resin technology is the carboxy-terminated butadiene-acrylonitrile copolymer (CTBN). The structure is shown in Scheme 1.47. In this resin the solubility in the epoxy resin is conferred by the acrylonitrile group, and an increase in the fraction present decreases the upper critical solution temperature, with 26% acrylonitrile conferring total miscibility of CTBN with a DGEBA-based epoxy resin (Pascault et al, 2002). [Pg.116]

The material used was a diglycidyl ether of bisphenol A (DGEBA) based epoxy resin (Ciba-Geigy, GY250) cured using stoichiometric amounts of 4,4 -diamin-odiphenyl sulfone (DDS). The rubber used for the modifications was Hycar car-boxy-teminated butadiene-acrylonitrile (CTBN) rubber (1300 x 13). The curing schedule for all the rubber-modified epoxy-DDS systems was as follows first the rubber and then DDS were mixed with the epoxy resin and stirred at 135 °C until the DDS was dissolved the systems were cured for 24 h at 120 °C and then postured for 4 h at 180 °C. The control epoxies were cured according to the same schedule. [Pg.121]