Polycarbonate-acrylonitrile butadiene styrene

Polycarbonate acrylonitrile-butadiene-styrene alloy Allyl-diglycol- carbonate polymer Diallyl phthalate molding Cellulose acetate Cellulose-acetate-butyrate resin... 

K.H. Pawlowski and B. Schartel, Flame retardancy mechanisms of aryl phosphates incombination with boehmite in bisphenol A polycarbonate/acrylonitrile butadiene styrene blends, Polym. Degrad. Stabil., 2008, 93 657-667. 

Pawlowski KH, Schartel B. Flame retardancy mechanisms of triphenyl phosphate, resorcinol bis(diphenyl phosphate) and bisphenol a bisfdiphenyl phosphate) in polycarbonate/acrylonitrile-butadiene-styrene blends. Polym. Int. 2007 56 1404-1414. 

The primary use of TBBPA is as a flame retardant in epoxy resin circuit boards and in electronic enclosures made of polycarbonate-acrylonitrile-butadiene-styrene (PC-ABS). Other applications of TBBPA include its use as a flame retardant for plastics, paper, and textiles as a plasticizer in adhesives and coatings and as a chemical intermediate for the synthesis of other flame retardants (e.g., TBBPA allyl ether). It is also been applied to carpeting and office furniture as a flame retardant. 

The other important diol which finds wide application in synthesis of flame retardant epoxy thermosets is 4,4 -isopropylidene bis(2,6-dibromo-phenol) (tetrabromobisphenol-A,TBPA).The primary use of TBPA is as a reactive flame retardant in epoxy resin-based circuit boards and in electronic enclosures made of polycarbonate-acrylonitrile, butadiene-styrene, etc. Hexafluorobisphenol-A (bisphenol-AF, hexafluoroisopropylidene diphenol) has also been used for the synthesis of fluorinated epoxy resin aiming at the anticorrosion coatings market for industrial vessels and pipes. The key disadvantages of fluorinated epoxies are their relatively high costs and low Tg, which limit their commercialisation. Thus utilisation of such diols in vegetable oil-based epoxy resins may result in similar performance. 

Ryulex C Polycarbonate/acrylonitrile-butadiene-styrene Dainippon Ink Chem. 

Apparatus for the measurement of this property according to DIN 53464 [56] are available from ATS FAAR (Table 2.6). Beracchi and coworkers [60] reported on computer-simulatedmoldshrinkage studies on talc-filled polypropylene, glass-reinforced polyamide, and polycarbonate/acrylonitrile-butadiene-styrene blends. 

Some measurements of this property have been made in a range of electrically conducting polymers. These include epoxy resin/polyaniline-dodecylbenzene sulfonic acid blends [38], polystyrene-black polyphenylene oxide copolymers [38], semiconductor-based polypyrroles [33], titanocene polyesters [40], boron-containing polyvinyl alcohol [41], copper-filled epoxy resin [42], polyethylidene dioxy thiophene-polystyrene sulfonate, polyvinyl chloride, polyethylene oxide [43], polycarbonate/acrylonitrile-butadiene-styrene composites [44], polyethylene oxide complexes with sodium lanthanum tetra-fluoride [45], chlorine-substituted polyaniline [46], polyvinyl pyrolidine-polyvinyl alcohol coupled with potassium bromate tetrafluoromethane sulfonamide [47], doped polystyrene block polyethylene [38, 39], polypyrrole [48], polyaniline-polyamide composites [49], and polydimethyl siloxane-polypyrrole composites [50]. 

Polycarbonate/acrylonitrile-butadiene-styrene copolymer, PC/ABS STRUCTURE Co-continuous... 

Polycarbonate/ acrylonitrile-butadiene-styrene copolymer or aciylonitrile-ethylene-propyl-ene-styrene alkyl vinyl ethers copl5rmer, PC/ABS or AES (ABS or AES/polycarbonate) STRUCTURE Dispersed... 

Eguiazabal, J. L, and Nazabal, J. (1990) Reprocessing polycarbonate/acrylonitrile-butadiene-styrene blends influence on physical properties, Polym. Eng. Sci. 30, 527-531. 

PC/ABS polycarbonate/acrylonitrile butadiene styrene PVA poly(vinyl alcohol) sometimes polyfvinyl acetate)... 

Friction coefficient of material depends on surface properties of other material in contact." " Static coefficient of friction was 0.36, 0.31, 0.4, 0.54 between steel and polypropylene, polycarbonate, acrylonitrile-butadiene-styrene copolymer, and polyamide 6, respectively (respective kinetic coefficients of fiiction were 0.26, 0.38, 0.27, 0.37). 

An adaptation of the Arrhenius equation referred to as the Kissinger method [32] was employed for this analysis. Determination of the activation energy for thermal degradation of polycarbonate-acrylonitrile-butadiene-styrene copolymer-montmorillonite composite when compared to the polymer blend without montmorillonite provided a similar trend... 

Common name Polycarbonate/acrylonitrile-butadiene-styrene blend, static dissipative ... 

The ethyl cyanoacrylates are probably the most common of all the standard cyanoacrylates and the most widely used. The ethyl cyanoacrylates are best suited for bonding most plastics and elastomers to themselves and have excellent adhesion to polycarbonate, acrylonitrile butadiene styrene, poly(vinyl chloride) (PVC) and butyl rubber amongst many. 

Injection molded instrument panels are most often described as hard or soft panels, an attribute identified by the surface tactile feel. Hard instrument panels are generally produced from either polycarbonate/acrylonitrile-butadiene-styrene (PC/ABS) blends (which are subsequently painted), or impact-modified TPO (a blend of polyolefins that are rubber modified) (which are subsequently painted or molded-in-color). 

The MID is manufactured by two-shot molding. The metallizable material PC/ ABS (polycarbonate, acrylonitrile butadiene styrene) of the first shot is enciosed in the second shot of PC (polycarbonate). The PC/ABS forms what wiii become the conductors, and the PC is the package. The pins contact the PCB and have to be dimensionaiiy stable, so precision injection moiding is a must. The PC/ABS is chemicaiiy metaiiized with Cu-Ni-Au. 

Stokes, V. K., The vibration welding of polycarbonate/acrylonitrile-butadiene-styrene blends to themselves and to other resins and blends, Polym Eng Sci, 40(10), 2175-2181,2000. Stokes, V. K., The vihration welding of poly(methyl methacrylate) to itself and to polycarbonate, poly(butylene terephthalate), and modified poly(phenylene oxide), J Adhes... 

---