Acetate Acrolein

Other aldehydes and related compounds have been reacted either alone or catalyzed with sulfuric acid, zinc chloride, magnesium chloride, ammonium chloride, or diammonium phosphate (94). Compounds such as l,3-bis(hydroxymethyl)-2-imidazolidone, glycol acetate, acrolein, chloroacetaldehyde, heptaldehyde, o- and p-chloro-benzaldehydes, furfural, p-hydroxybenzaldehyde, and m-nitrobenz-aldehyde all achieve the ASE by a bulking mechanism and not by low-level cross-linking. At weight gains of 15-25%, the highest ASE reported is 40%. 

HC CH(0H) CH20H. optically active. D-glyceraldehyde is a colourless syrup. May be prepared by mild oxidation of glycerol or by hydrolysis of glyceraldehyde acetal (prepared by oxidation of acrolein acetol). DL-glyceraldehyde forms colourless dimers, m.p. IBS-S C. Converted to methylglyoxal by warm dilute sulphuric acid. The enantiomers... 

Addition of nucleophiles to both activated and unactivated alkenes is catalyzed by Pd(II). Addition of alcohols or AcOH to alkenes bearing EWGs is catalyzed by PdCl2(PhCN)2 to give the corresponding ethers and esters. The addition of an alcohol to the cyclic acetal of acrolein 82 to give the ether 83 is also possible with the same catalyst[64]. Amines add to the vinylic ether 84 to give 85, but not to simple alkenes[65]. 

Acrolein (H2C=CHCH=0) reacts with sodium azide (NaNj) in aqueous acetic acid to form a compound C3H5N3O in 71% yield Propanal (CH3CH2CH=0) when subjected to the same reaction conditions is recovered unchanged Suggest a structure for the product formed from acrolein and offer an explanation for the difference in reactivity between acrolein and propanal... 

Potassium hydride Air, chlorine, acetic acid, acrolein, acrylonitrile, maleic anhydride, nitroparaf-flns, A-nitrosomethylurea, tetrahydrofuran, water... 

Unsaturated aldehydes undergo a similar reaction in the presence of strongly acid ion-exchange resins to produce alkenyUdene diacetates. Thus acrolein [107-02-8] or methacrolein [78-85-3] react with equimolar amounts of anhydride at —10°C to give high yields of the -diacetates from acetic anhydride, useful for soap fragrances. 

Acrolein is a highly toxic material with extreme lacrimatory properties. At room temperature acrolein is a Hquid with volatiUty and flammabiUty somewhat similar to acetone but unlike acetone, its solubiUty in water is limited. Commercially, acrolein is always stored with hydroquinone and acetic acid as inhibitors. Special care in handling is required because of the flammabiUty, reactivity, and toxicity of acrolein. 

The reaction is very exothermic. The heat of reaction of propylene oxidation to acrolein is 340.8 kJ /mol (81.5 kcal/mol) the overall reactions generate approximately 837 kJ/mol (200 kcal/mol). The principal side reactions produce acryUc acid, acetaldehyde, acetic acid, carbon monoxide, and carbon dioxide. A variety of other aldehydes and acids are also formed in small amounts. Proprietary processes for acrolein manufacture have been described (25,26). 

Reactions with Alcohols. The addition of alcohols to acrolein may be catalyzed by acids or bases. By the judicious choice of reaction conditions the regioselectivity of the addition maybe controlled and alkoxy propionaldehydes, acrolein acetals, or alkoxypropionaldehyde acetals produced in high yields (66). 

Reactions of acrolein with alcohols producing high yields of alkoxypropionaldehyde acetals are also known. Examples of these are displayed in Table 7 (70). The alkoxypropionaldehyde acetals may be useful as solvents or as intermediates in the synthesis of other useful compounds. 

Acrolein at a concentration of <500 ppm is also used to protect Hquid fuels against microorganisms. The dialkyl acetals of acrolein are also useful in this apphcation. In addition, the growth of algae, aquatic weeds, and moUusks in recirculating process water systems is also controlled by acrolein. 

Acrolein produced in the United States is stabilized against free-radical polymerization by 1000—2500 ppm of hydroquinone and is protected somewhat against base-catalyzed polymerization by about 100 ppm of acetic acid. To ensure stabiUty, the pH of a 10% v/v solution of acrolein in water should be below 6. 

Since the principal hazard of contamination of acrolein is base-catalyzed polymerization, a "buffer" solution to shortstop such a polymerization is often employed for emergency addition to a reacting tank. A typical composition of this solution is 78% acetic acid, 15% water, and 7% hydroquinone. The acetic acid is the primary active ingredient. Water is added to depress the freezing point and to increase the solubiUty of hydroquinone. Hydroquinone (HQ) prevents free-radical polymerization. Such polymerization is not expected to be a safety hazard, but there is no reason to exclude HQ from the formulation. Sodium acetate may be included as well to stop polymerization by very strong acids. There is, however, a temperature rise when it is added to acrolein due to catalysis of the acetic acid-acrolein addition reaction. 

Many synthetic latices exist (7,8) (see Elastomers, synthetic). They contain butadiene and styrene copolymers (elastomeric), styrene—butadiene copolymers (resinous), butadiene and acrylonitrile copolymers, butadiene with styrene and acrylonitrile, chloroprene copolymers, methacrylate and acrylate ester copolymers, vinyl acetate copolymers, vinyl and vinyUdene chloride copolymers, ethylene copolymers, fluorinated copolymers, acrylamide copolymers, styrene—acrolein copolymers, and pyrrole and pyrrole copolymers. Many of these latices also have carboxylated versions. 

Degradatiou. Heating of succinic acid or anhydride yields y-ketopimehc ddactone, cyclohexane-1,4-dione, and a mixture of decomposition products that include acetic acid, propionic acid, acryUc acid, acetaldeide, acrolein, oxaUc acid, cyclopentanone, and furane. In argon atmosphere, thermal degradation of succinic anhydride takes place at 340°C (123). Electrolysis of succinic acid produces ethylene and acetylene. 

Although they lack commercial importance, many other poly(vinyl acetal)s have been synthesized. These include acetals made from vinyl acetate copolymerized with ethylene (43—46), propjiene (47), isobutjiene (47), acrylonitrile (48), acrolein (49), acrylates (50,47), aHyl ether (51), divinyl ether (52), maleates (53,54), vinyl chloride (55), diaHyl phthalate (56), and starch (graft copolymer) (47). 

Acetic acid (qv) can be produced synthetically (methanol carbonylation, acetaldehyde oxidation, butane/naphtha oxidation) or from natural sources (5). Oxygen is added to propylene to make acrolein, which is further oxidized to acryHc acid (see Acrylic acid and derivatives). An alternative method adds carbon monoxide and/or water to acetylene (6). Benzoic acid (qv) is made by oxidizing toluene in the presence of a cobalt catalyst (7). 

Paint and varnish manufacturing Resin manufacturing closed reaction vessel Varnish cooldng-open or closed vessels Solvent thinning Acrolein, other aldehydes and fatty acids (odors), phthalic anhydride (sublimed) Ketones, fatty acids, formic acids, acetic acid, glycerine, acrolein, other aldehydes, phenols and terpenes from tall oils, hydrogen sulfide, alkyl sulfide, butyl mercaptan, and thiofen (odors) Olefins, branched-chain aromatics and ketones (odors), solvents Exhaust systems with scrubbers and fume burners Exhaust system with scrubbers and fume burners close-fitting hoods required for open kettles Exhaust system with fume burners... 

This is not the case in most fires where some oi the intermediate produces, formed when large, complex molecules are broken up, persist. Examples are hydrogen cyanide from wool and silk, acrolein from vegetable oils, acetic acid from timber or paper, and carbon or carbon monoxide from the incomplete combustion of carbonaceous materials. As the fire develops and becomes hotter, many of these intermediates, which are often toxic, are destroyed—for example, hydrogen cyanide is decomposed at about 538°C (1000°F). 

Acrolein Acetal (ir, i) By treating acrolein with ethyl orthoformate in the presence of ammonium nitrate. Fischer and Baer, Helv. Chim. Acta i8, 514 (1935). 

Acetic Acid Acetic anhydride Acetoacetanilide Acetone cyanhydnn Acetyl chloride Acrolein Acrylonitrile Alcohols Alkaloids... 

---