Zirconates

Figure V-8 illustrates that there can be a pH of zero potential interpreted as the point of zero charge at the shear plane this is called the isoelectric point (iep). Because of specific ion and Stem layer adsorption, the iep is not necessarily the point of zero surface charge (pzc) at the particle surface. An example of this occurs in a recent study of zircon (ZrSi04), where the pzc measured by titration of natural zircon is 5.9 0.1...

It was finally identified in zircon from Norway, by means of X-ray spectroscope analysis. It was named in honor of the city in which the discovery was made. Most zirconium minerals contain 1 to 5 percent hafnium. 

Iron-doped zircon system a-Irone [79-69-6] b-Irone [472-46-8] g-Irone [79-68-5]... 

Simple ABO compounds in addition to BaTiO are cadmium titanate [12014-14-17, CdTiO lead titanate [12060-00-3] PbTiO potassium niobate [12030-85-2] KNbO sodium niobate [12034-09-2], NaNbO silver niobate [12309-96-5], AgNbO potassium iodate [7758-05-6], KIO bismuth ferrate [12010-42-3], BiFeO sodium tantalate, NaTaO and lead zirconate [12060-01 -4], PbZrO. The perovskite stmcture is also tolerant of a very wide range of multiple cation substitution on both A and B sites. Thus many more complex compounds have been found (16,17), eg, (K 2 i/2) 3 ... 

The development of active ceramic-polymer composites was undertaken for underwater hydrophones having hydrostatic piezoelectric coefficients larger than those of the commonly used lead zirconate titanate (PZT) ceramics (60—70). It has been demonstrated that certain composite hydrophone materials are two to three orders of magnitude more sensitive than PZT ceramics while satisfying such other requirements as pressure dependency of sensitivity. The idea of composite ferroelectrics has been extended to other appHcations such as ultrasonic transducers for acoustic imaging, thermistors having both negative and positive temperature coefficients of resistance, and active sound absorbers. 

Flame-Retardant Treatments For Wool. Although wool is regarded as a naturally flame-resistant fiber, for certain appHcations, such as use in aircraft, it is necessary to meet more stringent requirements. The Zirpro process, developed for this purpose (122,123), is based on the exhaustion of negatively charged zirconium and titanium complexes on wool fiber under acidic conditions. Specific agents used for this purpose are potassium hexafluoro zirconate [16923-95-8] [16923-95-8] K ZrF, and potassium hexafluoro titanate [16919-27-0], K TiF. Various modifications of this process have been... 

Radioactive Gemstones. Zircon can contain radioactive elements, but the amount in jewelry-grade material is insignificant. Some of the treatments of Table 3 may leave irradiated material radioactive. Such gemstones have been released on rare occasions without the required cooling-off period (10). 

The heavy mineral sand concentrates are scmbbed to remove any surface coatings, dried, and separated into magnetic and nonmagnetic fractions (see Separation, magnetic). Each of these fractions is further spHt into conducting and nonconducting fractions in an electrostatic separator to yield individual concentrates of ilmenite, leucoxene, monazite, mtile, xenotime, and zircon. Commercially pure zircon sand typically contains 64% zirconium oxide, 34% siUcon oxide, 1.2% hafnium oxide, and 0.8% other oxides including aluminum, iron, titanium, yttrium, lanthanides, uranium, thorium, phosphoms, scandium, and calcium. 

Decomposition of Zircon. Zircon sand is inert and refractory. Therefore the first extractive step is to convert the zirconium and hafnium portions into active forms amenable to the subsequent processing scheme. For the production of hafnium, this is done in the United States by carbochlorination as shown in Figure 1. In the Ukraine, fluorosiUcate fusion is used. Caustic fusion is the usual starting procedure for the production of aqueous zirconium chemicals, which usually does not involve hafnium separation. Other methods of decomposing zircon such as plasma dissociation or lime fusions are used for production of some grades of zirconium oxide. 

---