Minimization, waste, processes

Thermal desorption treatment is generally considered to be an alternative to incineration. Thermal desorption operates at much lower temperatures than incineration and keeps the heating systems independent of the wastes, which minimizes off-gas production. The technology can be used as a waste minimization process, isolating and concentrating waste constituents, or as a product recovery process. Thermal desorption can also be used to separate contaminants in mixed waste streams by removing volatile constituents. 

Involvement of all departments in the plant in the source reduction and waste minimization process. 

Over the course of the past decade, the intermolecular Mizoroki-Heck reaction has witnessed tremendous progress [9,10]. As a comprehensive survey of this area is certainly beyond the scope of this chapter, the decision was taken to include a few important developments, namely the activation of less-reactive aryl chlorides, waste-minimized processes, and novel catalyst systems. 

Ceramic sensors are devices that provide environmental feedback by transforming a nonelectrical input into an electrical output. The applications for which these devices are used are widely varied. A brief list includes the use of sensors to determine the concentration of various gases, such as oxygen and carbon monoxide, temperature measurement devices, and pressure, radiation, and humidity sensors. Sensors have also become widely used in automotive applications. In manufacturing, because of the increasing need for waste minimization, process control, and environmentally conscious manufacturing, the increasing emphasis on sensor use and development is likely to continue to expand. The use of feedback loops in conjunction with sensors for process control/optimization has also increased in recent years. 

Although this is generally the sequence in which the five actions would be considered, this sequence will not always be correct. The best sequence in which to consider the five actions will depend on the process. The magnitude of effect each action will have on waste minimization will vary for different processes. 

Process operation for waste minimization. Many of the problems associated with waste from process operations can be mitigated if the... 

To the process designer, life-cycle analysis is useful because focusing exclusively on waste minimization at some point in the life cycle sometimes creates problems elsewhere in the cycle. The designer can often obtain useful insights by changing the boundaries of the system under consideration so that they are wider than those of the process being designed. 

Process waste minimization in general terms is a question of... 

DILLON Materials Selection for the Chemical Process Industries freeman Hazardous Waste Minimization... 

Chemical processes will in the future need to be designed as part of a sustainable industrial development which retains the capacity of ecosystems to support industrial activity and life. This book therefore places a high emphasis on waste minimization and energy efficiency in the context of good economic performance and good health and safety practices. 

The catalytic vapor-phase oxidation of propylene is generally carried out in a fixed-bed multitube reactor at near atmospheric pressures and elevated temperatures (ca 350°C) molten salt is used for temperature control. Air is commonly used as the oxygen source and steam is added to suppress the formation of flammable gas mixtures. Operation can be single pass or a recycle stream may be employed. Recent interest has focused on improving process efficiency and minimizing process wastes by defining process improvements that use recycle of process gas streams and/or use of new reaction diluents (20-24). 

With these waste-minimization techniques, methanol synthesis is relatively clean, and poses no unique environmental hazards. The need for environmental controls is more closely associated with the synthesis gas generation process. 

Reduced Emissions and Waste Minimization. Reducing harmful emissions and minimizing wastes within a process by inclusion of additional reaction and separation steps and catalyst modification may be substantially better than end-of-pipe cleanup or even simply improving maintenance, housekeeping, and process control practices. SO2 and NO reduction to their elemental products in fluid catalytic cracking units exemplifies the use of such a strategy (11). 

Given the first type of simulation, it is advantageous to be able to design a system of RO modules that can achieve the process objective at a minimal cost. A model has been iategrated iato a process simulation program to predict the stream matrix for a reverse osmosis process (132). In the area of waste minimization, the proper placement of RO modules is essential for achieving minimum waste at a minimum cost. Excellent details on how to create an optimal network of RO modules is available (96). 

REIST Aerosol Science and Technology, Second Edition RHINE, TUCKER Modeling of Gas-Fired Furnaces and Boilers and Other Industrial Heating Processes ROSSITER Waste Minimization Through Process Design SAMDANI Safety and Risk Management Tools and Techniques in the CPI... 

Regulatory Direction There is no doubt that pollution prevention continues to be the regulatoiy direction. The development of new and more efficient processes and waste minimization technologies will be essential to support this effort. 

The task force must be capable of identifying pollution reduc tion alternatives as well as be cognizant of inherent obstacles to the process. Barriers frequently arise from the anxiety associated with the belief that the program will negatively affect produc t quality or result in production losses. According to an EPA survey, 30 percent of indus-tiy comments responded that they were concerned that product qualify would decline if waste minimization techniques were implemented (Ref. 6). As such, the assessment team, and the team leader in particular, must be ready to react to these and other concerns (Ref. 2fy... 

It would obviously be desirable to eliminate the generation of waste. Practical alternatives are to minimize it by reduction at source or to recycle it. Table 16.7 illustrates the hierarchy of waste minimization practices. Source reduction includes increased process efficiency economies in the use of energy are also relevant, e.g. it may result in a decrease in the consumption of fossil fuels ... 

You should use the material balance information to identify the major sources of waste and pollution, to look for deviations from the norm in waste production, to identify areas of unexplained losses, and to pinpoint operations that contribute to flows that exceed national-, local-, or site-discharge regulations. Also, a good thing to remember is that, from a practical standpoint, process ciency is synonymous with waste minimization. 

Information provided in Part III. Section 8. of Form R is optional. In this section, you may identify waste minimization efforts relating to the reported toxic chemical. Waste minimization reduces the amount of the toxic chemicai in wastes by reducing waste generation or by recycling. This can be accomplished by equipment changes, process modifications, product reformulation, chemical substitutions, or other techniques. Waste minimization refers exclusively to practices which prevent the generation of wastes. Treatment or disposal does not minimize waste and should not be reported In this section. Recycling or reuse of a toxic chemical is considered waste minimization. Waste minimization applies to air emissions and wastewater, as well as to liquid or solid mate-... 

The facility identified code R3, Other Process Cost Reduction, as the major reason for the waste minimization action. 

El-Halwagi, A. M. and El-Halwagi, M. M. (1992). Waste minimization via computer aided chemical process synthesis—A new design philosophy, TESCE J., 18(2), 155-187,... 

---