Titanium tetrachloride, reactions

In the reaction of ketones" and 1,4-quinones" " with bis(trimethylsilyl)carbodiimide in the presence of titanium tetrachloride reaction occurs across the C=0 bond to give cyanoimines. An example, is the reaction of the 1,4-quinone 37 with two equivalents of the carbodiimide in the presence of TCI4 to give the quinone diimines 38. 

Previously, Pasini [27] and Colonna [28] had described the use chiral titani-um-Schiff base complexes in asymmetric sulfide oxidations, but only low selec-tivities were observed. Fujita then employed a related chiral salen-titanium complex and was more successful. Starting from titanium tetrachloride, reaction with the optically active C2-symmetrical salen 15 led to a (salen)titani-um(IV) dichloride complex which underwent partial hydrolysis to generate the t]-0x0-bridged bis[(salen)titanium(IV)] catalyst 16 whose structure was confirmed by X-ray analysis. Oxidation of phenyl methyl sulfide with trityl hydroperoxide in the presence of 4 mol % of 16 gave the corresponding sulfoxide with 53% ee [29]. 

Conventional synthetic schemes to produce 1,6-disubstituted products, e.g. reaction of a - with d -synthons, are largely unsuccessful. An exception is the following reaction, which provides a useful alternative when Michael type additions fail, e. g., at angular or other tertiary carbon atoms. In such cases the addition of allylsilanes catalyzed by titanium tetrachloride, the Sakurai reaction, is most appropriate (A. Hosomi, 1977). Isomerization of the double bond with bis(benzonitrile-N)dichloropalladium gives the y-double bond in excellent yield. Subsequent ozonolysis provides a pathway to 1,4-dicarbonyl compounds. Thus 1,6-, 1,5- and 1,4-difunctional compounds are accessible by this reaction. 

In this process, catalysts, such as boric acid, molybdenum oxide, zirconium, and titanium tetrachloride or ammonium molybdate, are used to accelerate the reaction. The synthesis is either carried out in a solvent (aUphatic hydrocarbon, trichlorobenzene, quinoline, pyridine, glycols, or alcohols) at approximately 200°C or without a solvent at 300°C (51,52). 

Similarly, another important esterification reaction of isopropyl alcohol iavolves the production of tetraisopropyl titanate [546-68-9], a commercial polymeri2ation catalyst, from titanium tetrachloride [7550-45-0] and isopropyl alcohol. 

Titanium carbide may also be made by the reaction at high temperature of titanium with carbon titanium tetrachloride with organic compounds such as methane, chloroform, or poly(vinyl chloride) titanium disulfide [12039-13-3] with carbon organotitanates with carbon precursor polymers (31) and titanium tetrachloride with hydrogen and carbon monoxide. Much of this work is directed toward the production of ultrafine (<1 jim) powders. The reaction of titanium tetrachloride with a hydrocarbon-hydrogen mixture at ca 1000°C is used for the chemical vapor deposition (CVD) of thin carbide films used in wear-resistant coatings. 

The reactants ate fed into the tail flame of a d-c nitrogen plasma. The reaction occurs rapidly at temperatures around 1500°C and the HCl reacts with excess ammonia to form ammonium chloride. Similar reactions have been carried out using furnaces, lasers, and r-f plasmas (34) as the source of heat. Other routes using titanium tetrachloride starting material include... 

Titanium Tetrafluoride. Titanium tetrafluoride [7783-63-3] is a white hygroscopic soHd, density 2798 kg/m, that sublimes at 284°C. The properties suggest that it is a fluorine-bridged polymer in which the titanium is six-coordinate. The preferred method of preparation is by direct fluorination of titanium sponge at 200°C in a flow system. At this temperature, the product is sufficiently volatile that it does not protect the unreacted sponge and the reaction proceeds to completion. The reaction of titanium tetrachloride with cooled, anhydrous, Hquid hydrogen fluoride may be used if pure hydrogen fluoride is available. 

Other preparative methods include direct synthesis from the elements, reaction between gaseous hydrogen fluoride and titanium tetrachloride, and decomposition of barium hexafluorotitanate [31252-69-6] BaTiF, or ammonium, (NH 2TiFg. 

Alternatively, the TiCl may be reduced using hydrogen, sodium, or magnesium. It follows that TiCl2 is the first stage in the KroU process for the production of titanium metal from titanium tetrachloride. A process for recovery of scrap titanium involving the reaction of scrap metal with titanium tetrachloride at >800° C to form titanium dichloride, collected in a molten salt system, and followed by reaction of the dichloride with magnesium to produce pure titanium metal, has been patented (122,123). 

Titanium diiodide may be prepared by direct combination of the elements, the reaction mixture being heated to 440°C to remove the tri- and tetraiodides (145). It can also be made by either reaction of soHd potassium iodide with titanium tetrachloride or reduction of Til with silver or mercury. 

Titanium tetraiodide can be prepared by direct combination of the elements at 150—200°C it can be made by reaction of gaseous hydrogen iodide with a solution of titanium tetrachloride in a suitable solvent and it can be purified by vacuum sublimation at 200°C. In the van Arkel method for the preparation of pure titanium metal, the sublimed tetraiodide is decomposed on a tungsten or titanium filament held at ca 1300°C (152). There are frequent hterature references to its use as a catalyst, eg, for the production of ethylene glycol from acetylene (153). 

Titanium disulfide can also be made by pyrolysis of titanium trisulfide at 550°C. A continuous process based on the reaction between titanium tetrachloride vapor and dry, oxygen-free hydrogen sulfide has been developed at pilot scale (173). The preheated reactants ate fed iato a tubular reactor at approximately 500°C. The product particles comprise orthogonally intersecting hexagonal plates or plate segments and have a relatively high surface area (>4 /g), quite different from the flat platelets produced from the reaction between titanium metal and sulfur vapor. The powder, reported to be stable to... 

Titanium trisulfide [12423-80-2], TiS, a black crystalline soHd having a monoclinic stmcture and a theoretical density of 3230 kg/m, can be prepared by reaction between titanium tetrachloride vapor and H2S at 480—540°C. The reaction product is then mixed with sulfur and heated to 600°C ia a sealed tube to remove residual chlorine. Sublimatioa may be used to separate the trisulfide (390°C) from the disulfide (500°C). Titanium trisulfide, iasoluble ia hydrochloric acid but soluble ia both hot and cold sulfuric acid, reacts with concentrated nitric acid to form titanium dioxide. 

Titanium(IV) sulfate can be prepared by the reaction of titanium tetrachloride with sulfur trioxide dissolved in sulfuryl chloride. 

Many other reactions of ethylene oxide are only of laboratory significance. These iaclude nucleophilic additions of amides, alkaU metal organic compounds, and pyridinyl alcohols (93), and electrophilic reactions with orthoformates, acetals, titanium tetrachloride, sulfenyl chlorides, halo-silanes, and dinitrogen tetroxide (94). 

Lewis acids are defined as molecules that act as electron-pair acceptors. The proton is an important special case, but many other species can play an important role in the catalysis of organic reactions. The most important in organic reactions are metal cations and covalent compounds of metals. Metal cations that play prominent roles as catalysts include the alkali-metal monocations Li+, Na+, K+, Cs+, and Rb+, divalent ions such as Mg +, Ca +, and Zn, marry of the transition-metal cations, and certain lanthanides. The most commonly employed of the covalent compounds include boron trifluoride, aluminum chloride, titanium tetrachloride, and tin tetrachloride. Various other derivatives of boron, aluminum, and titanium also are employed as Lewis acid catalysts. 

Rates that are independent of aromatic substrate concentration have been found for reaction of benzyl chloride catalyzed by TiCl4 or SbFj in nitromethane. This can be interpreted as resulting from rate-determining formation of the electrophile, presumably a benzyl cation. The reaction of benzyl chloride and toluene shows a second-order dependence on titanium tetrachloride concentration under conditions where there is a large excess of hydrocarbon. ... 

The yields ranged from 55% for the mixture of enamines formed from morpholine and methylisopropyl ketone to 94% for the enamine formed from dimethylamine and methyl t-butyl ketone. The hindered ketone 2,5-dimethylcyclopentanone could be converted to an enamine, but the more hindered ketone, 2,6-di-t-butylcyclohexanone, was inert. White and Weingarten 43) attribute the effectiveness of titanium tetrachloride in this reaction to its ability to scavenge water and to polarize the carbonyl bond. 

A one-step transformation of the C5-OH in 86 to the 5-(piperid-l-y)- or 5-(morpholin-4-yl) derivatives 168 was carried out by heating with the respective amines 166 in the presence of titanium tetrachloride. Tlie reaction probably involved formation of the unisolable 5-chloro compounds 167 (93JHC11) (Scheme 64). 

As catalysts for the Fries rearrangement reaction are for example used aluminum halides, zinc chloride, titanium tetrachloride, boron trifluoride and trifluoromethanesulfonic acid7... 

---