Salen, Chiral

Very reeently Kureshy et al. [98] further reported non-salen chiral Schiff base derived Ti complexes as eatalysts 70, 71 (Figure 23) in the KR of meso-siiXheae oxide, cyclohexene oxide, cyelooetene oxide and cA-butene oxide with anilines. The study deliberated upon the role of several ehiral and achiral additives with these catalysts to give chiral y9-amino alcohols with high enantioselectivity ee, >99%) in excellent yield (>99%) at 0 °C in lOh. Unlike the monomerie version 72 the chiral catalyst 70 used in this study was recoverable and recyclable several times with retention of its performance (Table 10)... 

Chiral (salene)Ti(IV) complexes, TMSCN. This system is selective for aldehydes the asymmetric induction is dependent upon aldehyde struc-... 

The Jacobsen-Katsuki epoxidation reaction is an efficient and highly selective method for the preparation of a wide variety of structurally and electronically diverse chiral epoxides from olefins. The reaction involves the use of a catalytic amount of a chiral Mn(III)salen complex 1 (salen refers to ligands composed of the N,N -ethylenebis(salicylideneaminato) core), a stoichiometric amount of a terminal oxidant, and the substrate olefin 2 in the appropriate solvent (Scheme 1.4.1). The reaction protocol is straightforward and does not require any special handling techniques. 

To date, a wide variety of structurally different chiral Mn(III)salen complexes have been prepared, of which only a handful have emerged as synthetically useful catalysts. By far the most widely used Mn(III)salen catalyst is the commercially available Jacobsen catalyst wherein R= -C4H8- and R = = i-Bu (Scheme 1.4.1). In... 

In 1990, Jacobsen and subsequently Katsuki independently communicated that chiral Mn(III)salen complexes are effective catalysts for the enantioselective epoxidation of unfunctionalized olefins. For the first time, high enantioselectivities were attainable for the epoxidation of unfunctionalized olefins using a readily available and inexpensive chiral catalyst. In addition, the reaction was one of the first transition metal-catalyzed... 

While generation of a Mn(V)oxo salen intermediate 8 as the active chiral oxidant is widely accepted, how the subsequent C-C bond forming events occur is the subject of some debate. The observation of frans-epoxide products from cw-olefins, as well as the observation that conjugated olefins work best support a stepwise intermediate in which a conjugated radical or cation intermediate is generated. The radical intermediate 9 is most favored based on better Hammett correlations obtained with o vs. o . " In addition, it was recently demonstrated that ring opening of vinyl cyclopropane substrates produced products that can only be derived from radical intermediates and not cationic intermediates. ... 

Chiral salen chromium and cobalt complexes have been shown by Jacobsen et al. to catalyze an enantioselective cycloaddition reaction of carbonyl compounds with dienes [22]. The cycloaddition reaction of different aldehydes 1 containing aromatic, aliphatic, and conjugated substituents with Danishefsky s diene 2a catalyzed by the chiral salen-chromium(III) complexes 14a,b proceeds in up to 98% yield and with moderate to high ee (Scheme 4.14). It was found that the presence of oven-dried powdered 4 A molecular sieves led to increased yield and enantioselectivity. The lowest ee (62% ee, catalyst 14b) was obtained for hexanal and the highest (93% ee, catalyst 14a) was obtained for cyclohexyl aldehyde. The mechanism of the cycloaddition reaction was investigated in terms of a traditional cycloaddition, or formation of the cycloaddition product via a Mukaiyama aldol-reaction path. In the presence of the chiral salen-chromium(III) catalyst system NMR spectroscopy of the crude reaction mixture of the reaction of benzaldehyde with Danishefsky s diene revealed the exclusive presence of the cycloaddition-pathway product. The Mukaiyama aldol condensation product was prepared independently and subjected to the conditions of the chiral salen-chromium(III)-catalyzed reactions. No detectable cycloaddition product could be observed. These results point towards a [2-i-4]-cydoaddition mechanism. 

Chiral salen-cobalt(III) complexes can also catalyze the reaction of glyoxylates with activated dienes to give the cycloaddition product in moderate yield and ee [29]. 

Song and Roh investigated the epoxidation of compounds such as 2,2-dimethylchromene with a chiral Mn (salen) complex (Jacobsen catalyst) in a mixture of [BMIM][PFg] and CH2CI2 (1 4 v/v), using NaOCl as the oxidant (Scheme 5.2-12) [62]. 

A breakthrough in the area of asymmetric epoxidation came at the beginning of the 1990s, when the groups of Jacobsen and Katsuki more or less simultaneously discovered that chiral Mn-salen complexes (15) catalyzed the enantioselective formation of epoxides [71, 72, 73], The discovery that simple achiral Mn-salen complexes could be used as catalysts for olefin epoxidation had already been made... 

Jacobsen subsequently reported a practical and efficient method for promoting the highly enantioselective addition of TMSN3 to meso-epoxides (Scheme 7.3) [4]. The chiral (salen)Cl-Cl catalyst 2 is available commercially and is bench-stable. Other practical advantages of the system include the mild reaction conditions, tolerance of some Lewis basic functional groups, catalyst recyclability (up to 10 times at 1 mol% with no loss in activity or enantioselectivity), and amenability to use under solvent-free conditions. Song later demonstrated that the reaction could be performed in room temperature ionic liquids, such as l-butyl-3-methylimidazo-lium salts. Extraction of the product mixture with hexane allowed catalyst recycling and product isolation without recourse to distillation (Scheme 7.4) [5]. 

Hou reported the use of a chiral (salen)titanium catalyst for the desymmetriza-tion of meso-epoxides with thiols (Scheme 7.14). The complex, fonned in situ... 

Ten years after Sharpless s discovery of the asymmetric epoxidation of allylic alcohols, Jacobsen and Katsuki independently reported asymmetric epoxidations of unfunctionalized olefins by use of chiral Mn-salen catalysts such as 9 (Scheme 9.3) [14, 15]. The reaction works best on (Z)-disubstituted alkenes, although several tri-and tetrasubstituted olefins have been successfully epoxidized [16]. The reaction often requires ligand optimization for each substrate for high enantioselectivity to be achieved. 

One way of overcoming these problems is by kinetic resolution of racemic epoxides. Jacobsen has been very successful in applying chiral Co-salen catalysts, such as 21, in the kinetic resolution of terminal epoxides (Scheme 9.18) [83]. One enantiomer of the epoxide is converted into the corresponding diol, whereas the other enantiomer can be recovered intact, usually with excellent ee. The strategy works for a variety of epoxides, including vinylepoxides. The major limitation of this strategy is that the maximum theoretical yield is 50%. 

Racemic terminal vinyloxiranes can also be kinetically resolved with water and the chiral (salen)Co111 complex 21, as already shown in Scheme 9.18 [95]. 

A completely different kind of macro cycle, a calix-salen type macrocycle, was obtained in good yield by microwave irradiation of various dialdehydes and diamines [165]. This was the first example of a calix-type synthesis under microwave conditions and without the presence of a metal template. An example of a [3 -1- 3] cyclocondensed macrocycle 265, obtained from a bis aldehyde and a chiral diamine is reported in Scheme 97. 

Bolm et al. [106] have carefully studied the synthesis and the hganding ability of salen-like bis(sulfoximines). The chirahty which is indeed generally introduced via the use of chiral diamines in the salen series, is in sulfoximines present via the sulfur atom. They investigated the Diels-Alder cycloaddition between cyclopentadiene and acryloyl-2-oxazolidinones with various bis(sulfoximines) (see Scheme 42) and Cu(OTf)2 as the copper source [107]. 

Non-covalently Immobilized Catalysts Based on Chiral Salen Ligands. . 152... 

Chiral salen ligands are diimines of salicylaldehydes with chiral diamines, usually cyclohexane-1,2-diamine (salen Hgands 1) or 1,2-diphenylethylene-diamine (salen ligands 2). The most widely used salen ligand in homogeneous catalysis is probably Jacobsen s ligand (la. Fig. 2), which is commercially available and hence has been used as reference to compare the results of im-... 

Only a few years after the development of the homogeneous chiral Mn(salen) complexes by Jacobsen and Katsuki, several research groups began to study different immobiUzation methods in both liquid and soUd phases. Fluorinated organic solvents were the first type of Uquid supports studied for this purpose. The main problem in the appUcation of this methodology is the low solubility of the catalytic complex in the fluorous phase. Several papers were pubUshed by Pozzi and coworkers, who prepared a variety of salen ligands with perfluorinated chains in positions 3 and 5 of the saUcyUdene moiety (Fig. 2). 

Fig. 5 Chiral salen ligand with improved solubility in ionic liquids...

Fig. 8 Symmetrical chiral salen ligands used in solid phase immobilization...

In one case, the insertion of the whole chiral hgand into a Co-exchanged zeohte by subhmation was described [24], Only small ligands, such as li and 2i, can be efficiently introduced into the micropores of the Y zeohte, whereas the bulkier Jacobsen s hgand la only remains on the external surface of the sohd. Unfortunately, these occluded (salen)Co complexes led to very low enantioselectivities (up to 8% ee) in the reduction of acetophenone with NaBH4. 

Electrochemical studies, in combination with EPR measurements, of the analogous non-chiral occluded (salen)Mn complex in Y zeoUte showed that only a small proportion of the complex, i.e., that located on the outer part of the support, is accessible and takes part in the catalytic process [26]. Only this proportion (about 20%) is finally oxidized to Mn and hence the amount of catalyst is much lower than expected. This phenomenon explains the low catalytic activity of this system. We have considered other attempts at this approach using zeolites with larger pore sizes as examples of cationic exchange and these have been included in Sect. 3.2.3. 

Fig. 14 Chiral salen ligands with charged substituents...

Larock R (2005) Palladium-Catalyzed Annulation of Alkynes. 14 147-182 Larrow JF, Jacobsen EN (2004) Asymmetric Processes Catalyzed by Chiral (Salen)Metal Complexes 6 123-152... 

---