Reversed micelles water solubilization

The next step was to measure the ability of the reverse micelles to solubilize water. Known amounts of water were injected into one-phase AOT-fluid systems, and the location of the pressure boundary between the one-phase and two-phase regions was determined. It is customary in AOT studies to express the amount of solubilized water in terms of Wq, the molar water/surfactant ratio [19]. In liquid systems the Wq value at which the system phase separates is known as This number can be as high as 100 for AOT in solvents such as pentane [12]. In ethane and propane, however, is much smaller and varies with pressure, as shown in Fig. 2 [10,20]. 

Microemulsions are systems consisting of water, oil, and amphiphile(s) that constitute a single optically isotropic and thermodynamically stable liquid solution [6]. Using this definition of microemulsions, it follows that solutions of micelles or reverse micelles with solubilized oil and water, respectively, should also be referred to as microemulsions, and these systems are therefore included in the present chapter. 

Arcoleo et al [220] reported synthesis of palladium nanoparticles from the micellar system AOT/n-heptane. In one of the methods (A), two microemulsions were prepared in one, the water phase was an aqueous solution of K2PdCl4 and in the other, an aqueous solution of hydrazine monohydrate N2H4.H2O. The same volumes of the two were mixed to obtain the metal particles. In another method (B), hydrazine monohydrate was directly added to a Pd(AOT)2/NaAOT/n-heptane solution. Method B produced 3-5 nm particles under specific conditions, which were stable in size as a function of time or hydrogen concentration. Arcoleo etal [422] also used NaAOT /n-heptane reverse micelles with solubilized aqueous... 

One of the structures proposed for an ionic reverse micelle containing solubilized water is shown in Fig. 5.28 (see Chapter 3 for alternative models). Since micelles in non-aqueous solvents have their polar groups directed inwards and their hydrophobic groups in contact with the solvent, water or small polar... 

Micelles are mainly important because they solubilize immiscible solvents in their cores. Nonnal micelles solubilize relatively large quantities of oil or hydrocarbon and reverse micelles solubilize large quantities of water. This is because the headgroups are water loving and the tailgroups are oil loving. These simple solubilization trends produce microemulsions (see section C2.3.11). 

It is of particular interest to be able to correlate solubility and partitioning with the molecular stmcture of the surfactant and solute. Likes dissolve like is a well-wom plirase that appears applicable, as we see in microemulsion fonnation where reverse micelles solubilize water and nonnal micelles solubilize hydrocarbons. Surfactant interactions, geometrical factors and solute loading produce limitations, however. There appear to be no universal models for solubilization that are readily available and that rest on molecular stmcture. Correlations of homologous solutes in various micellar solutions have been reviewed by Nagarajan [52]. Some examples of solubilization, such as for polycyclic aromatics in dodecyl sulphonate micelles, are driven by hydrophobic... 

Micelles and reversed micelles are able to solubilize substances which are insoluble in the bulk phase of the system considered. This solubilization is due to a solvation by the amphiphile and concomitantly a change in the order of the solubilized molecules may occur as a consequence of its modified solvation shell. In this sense reversed micelles of detergents in hydrophobic solvents with solubilized water in the core are... 

The conformation of bovine myelin basic protein (MBP) in AOT/isooctane/water reversed micellar systems was studied by Waks et al. 67). This MBP is an extrinsic water soluble protein which attains an extended conformation in aqueous solution 68 but is more density packed at the membrane surface. The solubilization of MBP in the AOT reversed micelles depends on the water/AOT-ratio w0 68). The maximum of solubilization was observed at a w0-value as low as 5.56. The same value was obtained for another major protein component of myelin, the Folch-Pi proteolipid 69). According to fluorescence emission spectra of MBP, accessibility of the single tryptophane residue seems to be decreased in AOT reversed micelles. From CD-spectra one can conclude that there is a higher conformational rigidity in reversed micelles and a more ordered aqueous environment. 

Obviously, water, aqueous solutions of salts, and mixtures of highly hydrophilic solvents have also been found to be solubilized in the micellar core [13,44]. The maximum amount of such solubilizates that can be dissolved in reversed micelles varies widely, strongly depending on the nature of the surfactant and the apolar solvent, on the concentrations of surfactant and of additives, and on temperature [24,45-47]. 

The small and positive values of enthalpy of solution of water in AOT-reversed micelles indicate that its energetic state is only slightly changed and that water solubilization (unfavorable from an enthalpic point of view) is driven mainly by a favorable change in entropy (the destructuration of the water at the interface and its dispersion as nanodroplets could be prominent contributions) [87],... 

The solubilization of water in lecithin-reversed micelles has been found to be an exothermic process. This finding confirms that water interacts with the zwitterionic head group of lecithin, promoting the formation of strong intermolecular H bonds [104]. 

The cobalt, nickel, and copper bis(2-ethylhexyl) phosphate surfactants dissolved in n-heptane lead to quasi-one-dimensional association microstructures, i.e., rodlike reversed micelles that increase in size via water solubilization [111],... 

In recent decades, many investigations have been carried out on the solubilization and on the physicochemical characterization of a wide variety of substances confined in water-containing reversed micelles. Even if these studies have not produced a general theory to predict a priori all the effects accompanying the solubihzation process, some general aspects nonetheless have been underhned. In the following, the results of some of these investigations, selected to show the extent of some peculiar behaviors, will be reported. 

Electrolytes are obviously solubilized only in the aqueous micellar core. Adding electrolytes in water-containing AOT-reversed micelles has an effect that is opposite to that observed for direct micelles, i.e., a decrease in the micellar radius and in the intermicellar attractive interactions is observed. This has been attributed to the stabilization of AOT ions at the water/surfactant interface [128]. 

Sometimes, the physicochemical properties of ionic species solubilized in the aqueous core of reversed micelles are different from those in bulk water. Changes in the electronic absorption spectra of ionic species (1 , Co ", Cu " ) entrapped in AOT-reversed micelles have been observed, attributed to changes in the amount of water available for solvation [2,92,134], In particular, it has been observed that at low water concentrations cobalt ions are solubihzed in the micellar core as a tetrahedral complex, whereas with increasing water concentration there is a gradual conversion to an octahedral complex [135],... 

FIG. 6 Representation of spherical water-containing reversed micelles solubilizing a polar molecule (p) in the micellar core (A) or an amphiphilic molecule (a) in the palisade layer (B). 

In addition to the degree of hydrophilicity of the solubilizates, their size and structure, the size of the host microregions, or the occurrence of specific processes must be taken into account in order to rationalize the driving forces of the solubilization process and of the solubilization site within water-containing reversed micelles [25,138,139],... 

By IR spectroscopy it was emphasized that the solubilization of amino acids or ohgopeptides in water-containing lecithin-reversed micelles involves structural changes in the aqueous micellar core [159]. 

The solubilization of enzymes and proteins in water-containing reversed micelles has attracted a great deal of interest for their selective separation, purification, and efficient refolding and for bioreactions involving a wide class of polar, apolar, and amphiphilic reactants and products [13,44,162-164]. 

For many solubilized enzymes the greatest catalytic activity and/or changes in conformation are found at R < 12, namely, when the competition for the water in the system between surfactant head groups and biopolymers is strong. This emphasizes the importance of the hydration water surrounding the biopolymer on its reactivity and conformation [13], It has been reported that enzymes incorporated in the aqueous polar core of the reversed micelles are protected against denaturation and that the distribution of some proteins, such as chymotrypsine, ribonuclease, and cytochrome c, is well described by a Poisson distribution. The protein state and reactivity were found markedly different from those observed in bulk aqueous solution [178,179],... 

Moreover, stable liquid systems made up of nanoparticles coated with a surfactant monolayer and dispersed in an apolar medium could be employed to catalyze reactions involving both apolar substrates (solubilized in the bulk solvent) and polar and amphiphilic substrates (preferentially encapsulated within the reversed micelles or located at the surfactant palisade layer) or could be used as antiwear additives for lubricants. For example, monodisperse nickel boride catalysts were prepared in water/CTAB/hexanol microemulsions and used directly as the catalysts of styrene hydrogenation [215]. 

At the present time, "interest in reversed micelles is intense for several reasons. The rates of several types of reactions in apolar solvents are strongly enhanced by certain amphiphiles, and this "micellar catalysis" has been regarded as a model for enzyme activity (. Aside from such "biomimetic" features, rate enhancement by these surfactants may be important for applications in synthetic chemistry. Lastly, the aqueous "pools" solubilized within reversed micelles may be spectrally probed to provide structural information on the otherwise elusive state of water in small clusters. 

Product recovery from reversed micellar solutions can often be attained by simple backextraction, by contacting with an aqueous solution having salt concentration and pH that disfavors protein solubilization, but this is not always a reliable method. Addition of cosolvents such as ethyl acetate or alcohols can lead to a disruption of the micelles and expulsion of the protein species, but this may also lead to protein denaturation. These additives must be removed by distillation, e.g., to enable reconstitution of the micellar phase. Temperature increases can similarly lead to product release as a concentrated aqueous solution. Removal of the water from the reversed micelles by molecular sieves or silica gel has also been found to cause a precipitation of the protein from the organic phase. 

Water-in-oil microemulsions (w/o-MEs), also known as reverse micelles, provide what appears to be a very unique and well-suited medium for solubilizing proteins, amino acids, and other biological molecules in a nonpolar medium. The medium consists of small aqueous-polar nanodroplets dispersed in an apolar bulk phase by surfactants (Fig. 1). Moreover, the droplet size is on the same order of magnitude as the encapsulated enzyme molecules. Typically, the medium is quite dynamic, with droplets spontaneously coalescing, exchanging materials, and reforming on the order of microseconds. Such small droplets yield a large amount of interfacial area. For many surfactants, the size of the dispersed aqueous nanodroplets is directly proportional to the water-surfactant mole ratio, also known as w. Several reviews have been written which provide more detailed discussion of the physical properties of microemulsions [1-3]. 

Although anation and aquation rates of vitamin B12 are not affected appreciably by aqueous micelles, the solubilized water in reversed micelles, in contrast, influences the rate and equilibrium constants for the formation and decomposition of glycine, imidazole, and sodium azide adducts of vitamin Bl2 (Fendler et al., 1974). A vitamin B12 molecule is conceivably shielded from the apolar solvent (benzene) by some 300 surfactant molecules. 

The behavior of metal ions in reversed micelles may be more interesting, since the reversed micelle provides less solvated metal ions in its core (Sunamoto and Hamada, 1978). Through kinetic studies on the hydrolysis of the p-nitrophenyl ester of norleucine in reversed micelles of Aerosol OT and CC14 which solubilize aqueous cupric nitrate, Sunamoto et al. (1978) observed the formation of naked copper(II) ion this easily formed a complex with the substrate ester (formation constant kc = 108—109). The complexed substrate was rapidly hydrolyzed by free water molecules acting as effective nucleophiles. 

The aqueous cores of reverse micelles are of particular interest because of their analogy with the water pockets in bioaggregates and the active sites of enzymes. Moreover, enzymes solubilized in reverse micelles can exhibit an enhanced catalytic efficiency. Figure B4.3.1 shows a reverse micelle of bis(2-ethylhexyl)sulfosuccinate (AOT) in heptane with three naphthalenic fluorescent probes whose excited-state pK values are much lower than the ground-state pK (see Table 4.4) 2-naphthol (NOH), sodium 2-naphthol sulfonate (NSOH), potassium 2-naphthol-6,8-disulfonate (NSOH). The spectra and the rate constants for deprotonation and back-recombination (determined by time-resolved experiments) provide information on the location of the probes and the corresponding ability of their microenvironment to accept a proton , (i) NDSOH is located around the center of the water pool, and at water contents w = [H20]/[A0T] >... 

It appears from a survey of the literature that the essential properties of micelles in nonpolar solvents are understood, namely their stability and variations of size, the dissociation behavior, and their solubilizing capacities. Reverse micelles can dissolve relatively large amounts of water (1-10% w/v depending on emulsion formula) as well as polar solutes and, of course, water-soluble compounds. Consequently, they can be used as media for a number of reactions, including enzyme-catalyzed reactions. Very few attempts to investigate such reverse micelles at subzero temperatures are known, in spite of the fact that hydrocarbon solutions present very low freezing points. 

The amount of water solubilized in a reverse micelle solution is commonly referred to as W, the molar ratio of water to surfactant, and this is also a good qualitative indicator of micelle size. This is an extremely important parameter since it will determine the number of surfactant molecules per micelle and is the main factor affecting micelle size. For an (AOT)/iso-octane/H20 system, the maximum Wq is around 60 [16], and above this value the transparent reverse micelle solution becomes a turbid emulsion, and phase separation may occur. The effect of salt type and concentration on water solubilization is important. Cations with a smaller hydration size, but the same ionic charge, result in less solubilization than cations with a large hydration size [17,18]. Micelle size depends on the salt type and concentration, solvent, surfactant type and concentration, and also temperature. 

For the scale-up of reverse micelle extractions, it is important to know which factors determine the mass transfer rate to or from the reverse micelle phase. So far most work has concentrated on the kinetics of solubilization of water molecules [34,35], protons [36], metal ions [20,35,37,38 0], amino acids [41], and proteins [8,35,42,43]. There are two separate processes forward transfer, which is transfer of solute from the aqueous to the reverse micelle phase, and back transfer, which is the antithesis of the first one. 

---