Cobalt Redox

Tertiary amines are also effective as accelerators in cobalt redox systems to advance the cure rate (Eig. 6). Hardness development measured by Shore D or Barcol D634-1 penetrometer can be used to demonstrate this benefit, which is useful in increasing mold turnover at ambient temperatures. 

SAQ 7.10 Consider the cobaltous ion cobalt redox couple. Write an expression for its electrode potential. 

Xing X, Zhang D, Li Y (2015) A non-aqueous all-cobalt redox flow battery using l,10-phenanthrolinecobalt(II) hexafluorophosphate as active species. J Power Sour 279 205-209. doi 10.1016/j.jpowsour.2015.01.011... 

When the water ligands around a cation are replaced by other ligands which are more strongly attached, the redox potential can change dramatically, for example for the cobalt(II)-cobalt(III) system we have... 

Catalyst Selection. The low resin viscosity and ambient temperature cure systems developed from peroxides have faciUtated the expansion of polyester resins on a commercial scale, using relatively simple fabrication techniques in open molds at ambient temperatures. The dominant catalyst systems used for ambient fabrication processes are based on metal (redox) promoters used in combination with hydroperoxides and peroxides commonly found in commercial MEKP and related perketones (13). Promoters such as styrene-soluble cobalt octoate undergo controlled reduction—oxidation (redox) reactions with MEKP that generate peroxy free radicals to initiate a controlled cross-linking reaction. 

The action of redox metal promoters with MEKP appears to be highly specific. Cobalt salts appear to be a unique component of commercial redox systems, although vanadium appears to provide similar activity with MEKP. Cobalt activity can be supplemented by potassium and 2inc naphthenates in systems requiring low cured resin color lithium and lead naphthenates also act in a similar role. Quaternary ammonium salts (14) and tertiary amines accelerate the reaction rate of redox catalyst systems. The tertiary amines form beneficial complexes with the cobalt promoters, faciUtating the transition to the lower oxidation state. Copper naphthenate exerts a unique influence over cure rate in redox systems and is used widely to delay cure and reduce exotherm development during the cross-linking reaction. 

Because of possible catalytic and biological relevance of metal-sulfur clusters, several such compounds of cobalt have been prepared. The action of H2S or M2S (M = alkali metal) on a non-aqueous solution of a convenient cobalt compound (often containing, or in the presence of, a phosphine) is a typical route. Diamagnetic [Co6Ss(PR3)6] (R = Et, Ph) comprise an octahedral array of metal atoms (Co-Co in the range 281.7 to 289.4pm), all faces capped by atoms,and show facile redox behaviour... 

Cobalt, tris(l,2-ethanediamine)-conformation, 1,25,197 polarography, 1,481 racemization, 1, 466 solid state, 1,466,467 reactions, 1, 27 redox potential, 1, 514 structure, 1, 67... 

Similar effects are observed in the iron complexes of Eqs. (9.13) and (9.14). The charge on the negatively charged ligands dominates the redox potential, and we observe stabilization of the iron(iii) state. The complexes are high-spin in both the oxidation states. The importance of the low-spin configuration (as in our discussion of the cobalt complexes) is seen with the complex ions [Fe(CN)6] and [Fe(CN)6] (Fq. 9.15), both of which are low-spin. 

The third reason for favoring a non-radical pathway is based on studies of a mutant version of the CFeSP. This mutant was generated by changing a cysteine residue to an alanine, which converts the 4Fe-4S cluster of the CFeSP into a 3Fe-4S cluster (14). This mutation causes the redox potential of the 3Fe-4S cluster to increase by about 500 mV. The mutant is incapable of coupling the reduction of the cobalt center to the oxidation of CO by CODH. Correspondingly, it is unable to participate in acetate synthesis from CH3-H4 folate, CO, and CoA unless chemical reductants are present. If mechanism 3 (discussed earlier) is correct, then the methyl transfer from the methylated corrinoid protein to CODH should be crippled. However, this reaction occurred at equal rates with the wild-type protein and the CFeSP variant. We feel that this result rules out the possibility of a radical methyl transfer mechanics and offers strong support for mechanism 1. 

The rate of peroxide decomposition and the resultant rate of oxidation are markedly increased by the presence of ions of metals such as iron, copper, manganese, and cobalt [13]. This catalytic decomposition is based on a redox mechanism, as in Figure 15.2. Consequently, it is important to control and limit the amounts of metal impurities in raw rubber. The influence of antioxidants against these rubber poisons depends at least partially on a complex formation (chelation) of the damaging ion. In favor of this theory is the fact that simple chelating agents that have no aging-protective activity, like ethylene diamine tetracetic acid (EDTA), act as copper protectors. 

A new crosslinkable polymer was synthesized by the SBP-catalyzed polymerization of cardanol. When HRP was used as catalyst for the cardanol polymerization, the reaction took place in the presence of a redox mediator (phe-nothiazine derivative) to give the polymer. Fe-salen efficiently catalyzed the polymerization of cardanol in organic solvents (Scheme 29). " The polymerization proceeded in 1,4-dioxane to give the soluble polymer with molecular weight of several thousands in good yields. The curing of the polymer took place in the presence of cobalt naphthenate catalyst at room temperature or thermal treatment (150°C for 30 min) to form yellowish transparent films ( artificial urushi ... 

Late transition metal or 3d-transition metal irons, such as cobalt, nickel, and copper, are important for catalysis, magnetism, and optics. Reduction of 3d-transition metal ions to zero-valent metals is quite difficult because of their lower redox potentials than those of noble metal ions. A production of bimetallic nanoparticles between 3d-transi-tion metal and noble metal, however, is not so difficult. In 1993, we successfully established a new preparation method of PVP-protected CuPd bimetallic nanoparticles [71-73]. In this method, bimetallic hydroxide colloid forms in the first step by adjusting the pH value with a sodium hydroxide solution before the reduction process, which is designed to overcome the problems caused by the difference in redox potentials. Then, the bimetallic species... 

Anson FC, Ni CL, Saveant JM. 1985. Electrocatalysis at redox polymer electrodes with separation of the catalytic and charge propagation roles. Reduction of dioxygen to hydrogen peroxide as catalyzed by cobalt(II) tetrakis(4-A-methylpyridyl)porphyrin. J Am Chem Soc 107 3442. 

Guilard R, Brandes S, Tardieux C, Tabard A, L Her M, Miry C, Gouerec P, Knop Y, Collman JP. 1995. Synthesis and characterization of cofacial metaUodiporphyrins involving cobalt and lewis acid metals New dinuclear multielectron redox catalysts of dioxygen reduction. J Am Chem Soc 117 11721. 

The nuclear decay of radioactive atoms embedded in a host is known to lead to various chemical and physical after effects such as redox processes, bond rupture, and the formation of metastable states [46], A very successful way of investigating such after effects in solid material exploits the Mossbauer effect and has been termed Mossbauer Emission Spectroscopy (MES) or Mossbauer source experiments [47, 48]. For instance, the electron capture (EC) decay of Co to Fe, denoted Co(EC) Fe, in cobalt- or iron-containing compormds has been widely explored. In such MES experiments, the compormd tmder study is usually labeled with Co and then used as the Mossbauer source versus a single-line absorber material such as K4[Fe(CN)6]. The recorded spectrum yields information on the chemical state of the nucleogenic Fe at ca. 10 s, which is approximately the lifetime of the 14.4 keV metastable nuclear state of Fe after nuclear decay. 

The reductive coupling of allyl halides to 1,5-hexadiene at glassy C electrodes was catalyzed by tris(2, 2,-bipyridyl)cobalt(II) and tris(4,4 -dimethyl-2, 2/-bipyridyl)cobalt(II) in aqueous solutions of 0.1 M sodium dodecylsulfate (SDS) or 0.1 M cetyltrimethylammonium bromide (CTAB).48 An organocobalt(I) intermediate was observed by its separate voltammetric reduction peak in each system studied. This intermediate undergoes an internal redox reaction to form 1,5-hexadiene... 

Pietrzyk, P., Sojka, Z. (2007) Co2+/Co° redox couple revealed by EPR spectroscopy triggers preferential coordination of reactants during SCR of NOx with propene over cobalt-exchanged zeolites, Chem. Commun., 1930. 

Wu JH, Winn PJ, Ferenczy GG, Reynolds CA (1999) Solute polarization and the design of cobalt complexes as redox-active therapeutic agents. Int J Quant Chem 73(2) 229-236... 

Cobalt(II) carbonyls are rarely met, except as transient redox products from stable lower-valent precursors. 

---