Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Qualitative chromatography

Diazo coupling in N-unsubstituted imidazoles occurs with equal case at either C-2 or C-4(5) (or both) in reactions which have been shown to involve reaction of the imidazole anion with the diazonium ion [10]. lire intensely coloured azo dyes which are formed have long been used for identification of imidazoles, especially in qualitative chromatography [7]. The azo groups can be reduced to amino or hydrazine groups, providing a useful alternative approach, especially to 2-aminoimidazoles (see Section 8.3),... [Pg.214]

The application of standard solutions and pre-determined volumes is strongly recommended, even in so-called qualitative chromatography. Various measuring devices can be used for this purpose, like those illustrated in Fig. 20. [Pg.62]

Gas chromatography also can be used for qualitative purposes. When using an FT-IR or a mass spectrometer as the detector, the available spectral information often can be used to identify individual solutes. [Pg.575]

Mixtures passed through special columns (chromatography) in the gas phase (GC) or liquid phase (LC) can be separated into their individual components and analyzed qualitatively and/or quantitatively. Both GC and LC analyzers can be directly coupled to mass spectrometers, a powerful combination that can simultaneously separate and identify components of mixtures. [Pg.252]

W. Jennings and T. ShS o2im.o. o, Qualitative Analysis of Flavor andFragrance Volatiles by Glass Capillay Gas Chromatography, Academic Press, Inc., New York, 1980 also iacludes retention iadexes and mass spectral data. [Pg.435]

The right chromatography column should separate the sample sufficiently to enable identification or quantitative measurement of the components within a reasonable period of time. The resolution factor (Rs) for two sample components is determined by the width of the two peaks and the distance between the peak maxima. In general, Rs values of 1.0 are required for good qualitative or quantitative work, whereas Rs values >1.5 indicate baseline resolution for two components (3). [Pg.94]

Multidimensional gas chromatography has also been used in the qualitative analysis of contaminated environmental extracts by using spectral detection techniques Such as infrared (IR) spectroscopy and mass spectrometry (MS) (20). These techniques produce the most reliable identification only when they are dealing with pure substances this means that the chromatographic process should avoid overlapping of the peaks. [Pg.337]

The multiplicity of responses makes thin-layer chromatography not particularly suited for pyrethrum analysis, either qualitative or quantitative. It did confirm, however, that the crude oleoresin contains several pyrethroid compounds in substantial quantity, as previously shown by gas chromatography work. [Pg.64]

The Tools of Proteomics A variety of methods and techniques including two-dimensional gel electrophoresis (2DE), capillary liquid chromatography, stable isotope labeling, and mass spectrometry has been developed for qualitative and quantitative protein... [Pg.1028]

Fortunately, such sophistication is not always necessary to compare containers. For example, a few days after the gas chromatography tests were completed, we opened the jars and were able to detect by sniffing that the grape odor from one container was noticeably more distinct than from the other. The methyl anthranilate, which had eluded the gas chromatograph, could be detected qualitatively and, for comparative purposes, quantitatively by the human nose. [Pg.63]

Chromatography is one of the most powerful and widely used means for separating mixtures, because it is often inexpensive and it can be used to provide quantitative as well as qualitative information. The simplest method is paper chromatography. A drop of solution is placed near the bottom edge of the stationary phase, an absorbant support, such as a strip of paper. The mobile phase, a fluid solvent, is added below the spot and the solvent is absorbed on the support. As the mobile phase rises up the stationary phase by capillary... [Pg.475]

In many analyses, fhe compound(s) of inferesf are found as par of a complex mixfure and fhe role of fhe chromatographic technique is to provide separation of fhe components of that mixture to allow their identification or quantitative determination. From a qualitative perspective, the main limitation of chromatography in isolation is its inability to provide an unequivocal identification of the components of a mixture even if they can be completely separated from each other. Identification is based on the comparison of the retention characteristics, simplistically the retention time, of an unknown with those of reference materials determined under identical experimental conditions. There are, however, so many compounds in existence that even if the retention characteristics of an unknown and a reference material are, within the limits of experimental error, identical, the analyst cannot say with absolute certainty that the two compounds are the same. Despite a range of chromatographic conditions being available to the analyst, it is not always possible to effect complete separation of all of the components of a mixture and this may prevent the precise and accurate quantitative determination of the analyte(s) of interest. [Pg.20]

Qualitative (identification) applications depend upon the comparison of the retention characteristics of the unknown with those of reference materials. In the case of gas chromatography, this characteristic is known as the retention index and, although collections of data on popular stationary phases exist, it is unlikely that any compound has a unique retention index and unequivocal identification can be effected. In liquid chromatography, the situation is more complex because there is a much larger number of combinations of stationary and mobile phases in use, and large collections of retention characteristics on any single system do not exist. In addition, HPLC is a less efficient separation... [Pg.25]

The first part of the book consists of a detailed treatment of the fundamentals of thin-layer chromatography, and of measurement techniques and apparatus for the qualitative and quantitative evaluation of thin-layer chromatograms. In situ prechromatographic derivatization techniques used to improve the selectivity of the separation, to increase the sensitivity of detection, and to enhance the precision of the subsequent quantitative analysis are summarized in numerous tables. [Pg.4]

This technique detects substances qualitatively and quantitatively. The chromatogram retention time is compound-specific, and peak-height indicates the concentration of pollutant in the air. Detection systems include flame ionization, thermal conductivity and electron capture. Traditionally gas chromatography is a laboratory analysis but portable versions are now available for field work. Table 9.4 lists conditions for one such portable device. [Pg.218]

Defaye, K. and Garcia Fernandez, J.M., Protonic and thermal activation of sucrose an the oligosaccaride composition of caramel. Carbohydrate Res., 256, Cl, 1994. Ratsimba, V. et al.. Qualitative and qnantitative evaluation of mono- and disaccharides in D-fructose, D-glucose and sucrose caramels by gas-liquid chromatography-mass spectrometry di-D-fructose dianhydrides as tracers of caramel authenticity, J. Chro-matogr. A, 844, 283, 1999. [Pg.345]

Instead, the idea of Coupled-Column Chromatography was employed (1. Here, this means the manual coll don of fractions from one chromatograph and their reinjection into another. Coll tion of GPC fractions and their analysis by other instruments or re-injection has often been utilized qualitatively in GPC. However, precise quantitative analysis is much less often reported (6). [Pg.163]

Modem planar chromatography is suitable not only for qualitative and quantitative analysis but also for preparative purposes. The separation efficiency of a thin-layer chromatographic system is independent of this intended purpose and is mainly determined by the quahty of the stationary phase, that is to say, by the applied coated layer. Therefore, progress in modem planar chromatography can be attributed not only to the development of the efficiency of the instmments but also to a large extent to the availability of high-quahty precoated layers. And today, as in the past, bulk sorbents for self production, especially of preparative layer chromatography (PLC) layers, are widely used. [Pg.41]

There are many proteins in the human body. A few hundreds of these compounds can be identified in urine. The qualitative determination of one or a series of proteins is performed by one of the electrophoresis techniques. Capillary electrophoresis can be automated and thus more quantified (Oda et al. 1997). Newer techniques also enable quantitative determination of proteins by gel electrophoresis (Wiedeman and Umbreit 1999). For quantitative determinations, the former method of decomposition into the constituent amino acids was followed by an automated spectropho-tometric measurement of the ninhydrin-amino add complex. Currently, a number of methods are available, induding spectrophotometry (Doumas and Peters 1997) and, most frequently, ELISAs. Small proteins can be detected by techniques such as electrophoresis, isoelectric focusing, and chromatography (Waller et al. 1989). These methods have the advantage of low detection limits. Sometimes, these methods have a lack of specifidty (cross-over reactions) and HPLC techniques are increasingly used to assess different proteins. The state-of-the-art of protein determination was mentioned by Walker (1996). [Pg.208]

All previous discussion has focused on sample preparation, i.e., removal of the targeted analyte(s) from the sample matrix, isolation of the analyte(s) from other co-extracted, undesirable sample components, and transfer of the analytes into a solvent suitable for final analysis. Over the years, numerous types of analytical instruments have been employed for this final analysis step as noted in the preceding text and Tables 3 and 4. Overall, GC and LC are the most often used analytical techniques, and modern GC and LC instrumentation coupled with mass spectrometry (MS) and tandem mass spectrometry (MS/MS) detection systems are currently the analytical techniques of choice. Methods relying on spectrophotometric detection and thin-layer chromatography (TLC) are now rarely employed, except perhaps for qualitative purposes. [Pg.439]

Visualization Techniques for Thin-Layer Chromatography.892 Qualitative Identification and Nicroreaction Techniques it ... [Pg.374]


See other pages where Qualitative chromatography is mentioned: [Pg.166]    [Pg.739]    [Pg.864]    [Pg.90]    [Pg.166]    [Pg.739]    [Pg.864]    [Pg.90]    [Pg.215]    [Pg.548]    [Pg.341]    [Pg.501]    [Pg.374]    [Pg.96]    [Pg.431]    [Pg.59]    [Pg.229]    [Pg.244]    [Pg.17]    [Pg.241]    [Pg.499]    [Pg.309]    [Pg.526]    [Pg.534]    [Pg.16]    [Pg.115]    [Pg.704]    [Pg.732]    [Pg.341]   
See also in sourсe #XX -- [ Pg.189 ]




SEARCH



Chromatography qualitative peak information

High performance liquid chromatography qualitative applications

Qualitative Chromatography—Analyte Identification

Qualitative analysis chromatography

Qualitative analysis high-performance liquid chromatography

Qualitative analysis liquid chromatography-mass spectrometry

Qualitative identification by pyrolysis - gas chromatography

Thin-layer chromatography qualitative analysis

© 2024 chempedia.info