Propylene oxide oxirane processes

Butylene Oxide. Butylene oxides are prepared on a small scale by Dow by chlorohydrin technology. There appears to be no technical reason why they could not be prepared by the propylene oxide Oxirane process (see Chlorohydrins). 

A significant outlet for TBHP is the molybdenum-complex cataly2ed production of propylene oxide, a process developed by Oxirane (221—224). 

An oxirane process utilizes ethylbenzene to make the hydroperoxide, which then is used to make propylene oxide [75-56-9]. The hydroperoxide-producing reaction is similar to the first step of cumene LPO except that it is slower (2,224,316—318). In the epoxidation step, a-phenylethyl alcohol [98-85-1] is the coproduct. It is dehydrated to styrene [100-42-5]. The reported 1992 capacity for styrene by this route was 0.59 X 10 t/yr (319). The corresponding propylene oxide capacity is ca 0.33 x 10 t/yr. The total propylene oxide capacity based on hydroperoxide oxidation of propylene [115-07-1] (coproducts are /-butyl alcohol and styrene) is 1.05 x 10 t/yr (225). 

The addition of an oxygen atom to an olefin to generate an epoxide is often catalyzed by soluble molybdenum complexes. The use of alkyl hydroperoxides such as tert-huty hydroperoxide leads to the efficient production of propylene oxide (qv) from propylene in the so-called Oxirane (Halcon or ARCO) process (79). 

The second process involves reaction of propylene with peroxides, as in the Oxirane process (97), in which either isobutane or ethylbenzene is oxidized to form a hydroperoxide. 

There are other commercial processes available for the production of butylenes. However, these are site or manufacturer specific, eg, the Oxirane process for the production of propylene oxide the disproportionation of higher olefins and the oligomerisation of ethylene. Any of these processes can become an important source in the future. More recentiy, the Coastal Isobutane process began commercialisation to produce isobutylene from butanes for meeting the expected demand for methyl-/ rZ-butyl ether (40). 

Oxirane Process. In Arco s Oxirane process, tert-huty alcohol is a by-product in the production of propylene oxide from a propjiene—isobutane mixture. Polymer-grade isobutylene can be obtained by dehydration of the alcohol. / fZ-Butyl alcohol [75-65-0] competes directly with methyl-/ fZ-butyl ether as a gasoline additive, but its potential is limited by its partial miscibility with gasoline. Current surplus dehydration capacity can be utilized to produce isobutylene as more methyl-/ fZ-butyl ether is diverted as high octane blending component. 

There are currentiy three important processes for the production of isobutylene (/) the extraction process using an acid to separate isobutylene (2) the dehydration of tert-huty alcohol, formed in the Arco s Oxirane process and (3) the cracking of MTBE. The expected demand for MTBE wHl preclude the third route for isobutylene production. Since MTBE is likely to replace tert-huty alcohol as a gasoline additive, the second route could become an important source for isobutylene. Nevertheless, its avaHabHity wHl be limited by the demand for propylene oxide, since it is only a coproduct. An alternative process is emerging that consists of catalyticaHy hydroisomerizing 1-butene to 2-butenes (82). In this process, trace quantities of butadienes are also hydrogenated to yield feedstocks rich in isobutylene which can then be easHy separated from 2-butenes by simple distHlation. 

Oxirane A general process for oxidizing olefins to olefin oxides by using an organic hydroperoxide, made by autoxidation of a hydrocarbon. Two versions are commercial. The first to be developed oxidizes propylene to propylene oxide, using as the oxidant f-butyl hydroperoxide made by the atmospheric oxidation of isobutane. Molybdenum naphthenate is used as a... 

Styrene, one of the world s major organic chemicals, is derived from ethylene via ethylbenzene. Several recent developments have occurred with respect to this use for ethylene. One is the production of styrene as a co-product of the propylene oxide process developed by Halcon International (12). In this process, benzene is alkylated with ethylene to ethylbenzene, and the latter is oxidized to ethylbenzene hydroperoxide. This hydroperoxide, in the presence of suitable catalysts, can convert a broad range of olefins to their corresponding oxirane compounds, of which propylene oxide presently has the greatest industrial importance. The ethylbenzene hydroperoxide is converted simultaneously to methylphenyl-carbinol which, upon dehydration, yields styrene. Commercial application of this new development in the use of ethylene will be demonstrated in a plant in Spain in the near future. 

An alternative method for the manufacture of styrene (the oxirane process), uses ethylbenzene that is oxidized to the hydroperoxide and reacts with propylene to give phenylmethylcarbinol (or methyl benzyl alcohol) and propylene oxide. The alcohol is then dehydrated at relatively low temperatures (180 to 400°C) by using an acidic silica gel (Si02) or titanium dioxide (Ti02) catalyst. 

Some details of the preparation of allyloxy polyethers are now described. This involves the base-catalyzed ring opening of one or more of the oxiranes ethylene oxide, propylene oxide and butylene oxide in a three-step process as described by Whitmarsh [1]. 

Standard Oil of California added the petrochemicals of Gulf Oil, purchased in 1984, to its subsidiary Chevron Chemical. Other United States petrochemical producers took advantage of special circumstances. Amoco was served by a strong terephthalic (TPA) base and its good performance in polypropylene Arco, by its Lyondell subsidiary in Channelview, Texas, and by its development of the Oxirane process through which propylene oxide could be produced by direct oxidation with styrene as a coproduct. The process also led to MTBE (methyl tertiary-butyl ether), the antiknock agent used as a substitute for tetraethyl lead. 

New synthetic processes for the preparation of established products were also industrially developed in Japan the manufacture of methyl methacrylate from C4 olefins, by Sumitomo and Nippon Shokubai in France, the simultaneous production of hydroquinone and pyro-catechin through hydrogen peroxide oxidation of phenol by Rhone-Poulenc in the United States the production of propylene oxide through direct oxidation of propylene operating jointly with styrene production, developed by Ralph Landau and used in the Oxirane subsidiary with Arco, which the latter fully took over in 1980 in Germany and Switzerland, the synthesis of vitamin A from terpenes, used by BASF and Hoffmann-La Roche. 

The economics of any manufacturing process improves if the co-product or side product has a market. 90% of the world production of phenol is through the cumene hydroperoxide route because of the economic advantage of the coproduct acetone. Oxirane technology for the production of propylene oxide from ethyl benzene leads to a co-product styrene and from isobutane leads to a co-product /-butyl alcohol. 

A homogeneous catalytic process, developed by Oxirane, uses a molybdenum catalyst that epoxidizes propylene by transferring an oxygen atom from tertiary butyl hydroperoxide. This is shown by 8.28. The hydroperoxide is obtained by the auto-oxidation of isobutane. The co-product of propylene oxide, /-butanol, finds use as an antiknock gasoline additive. It is also used in the synthesis of methyl /-butyl ether, another important gasoline additive. The over-... 

Fig. 6.11. Manufacture of styrene and propylene oxide from ethylbenzene and propylene. ARCO Chemical (Oxirane) process.

This process was originally developed and commercialized by Oxirane (a joint venture company between ARCO Chemical, now Lyondell, and Halcon) and independently by Shell Petrochemical Company. At present, this is one of the main processes for the commercial manufacture of propylene oxide (the other is a variant of the same that starts with isobutane instead of ethylbenzene, and produces propylene oxide together with tert-butyl alcohol, isobutylene, and... 

Epoxidation with hydroperoxides is the basis for the large-scale indirect production of propylene oxide by a process that has been called the Oxirane or Halcon processes. Early work was reported by Smith in a patent issued in 1956 [457], which described soluble heteropoly acids containing transition metals such as chromium, molybdenum, and tungsten that could be employed as homogeneous catalysts for the reaction of olefins with organic hydroperoxides and hydrogen peroxide. 

The r-butyl alcohol, co-product produced at the rate of 15 t/t<3) of propylene oxide, depending on whether or not a market is available, is utilized as such or dehydrated to isobutene (200°C, atmospheric pressure, titanium oxide base catalyst). If the isobutene is itself unusable, it can be hydrogenated to isobutane, which is recycled. The good antiknock properties of r-butyl alcohol currently mak/ it a highly popular additive for automotive gasolines. In addition, certain recent processes (Mitsubishi Rayon, Nippon Shokubal Oxirane) can be used to convert the r-butyl alcohol to metbacrylic acid (see Section 11.2.3.2). 

This ratio may vary from 2.1 to 25 according to the operating conditions. ARCO Chemical (formerly Oxirane) has developed a process derived from the propylene oxide r-butyl alcohol technology for the direct oxidation of iso butane to raise the proportion of alcohol... 

The only industrial method for producing tertiary butyl alcohol is based on a variant of the Oxirane /ARCO Chemical) process for manufacturing propylene oxide,in which isobutane is used as a co-reactant and the alcohol is a co-product The technological analysis of this scheme and the related economic data are given in Section 724, which discusses the manufacture of propylene oxide. 

If large amounts of isobutyl alcohol are available as by-product of the Oxirane process for propylene oxide manufacture, it can also be obtained very easily form the isobutylene contained in Cl streams of steam cracking units. After the recovery of butadiene, the isobutylene of these streams is selectively hydrated to tertiary butyl alcohol. This process carried out in the liquid phase in the presence of a solid catalyst is certainly realized in fixed bed reactors. Very few details have been disclosed on this reaction which constitutes the first step of a new process to obtain methylmethacrylate from a spent butylene isobutylene feed (5 ). 

Methylphenylcarbinol is also an intermediate in the Halcon process, in which ethylbenzene is oxidized to a hydroperoxide at around 130 °C with air, then converted with propylene into propylene oxide and carbinol. The carbinol is subsequently dehydrated on a titanium catalyst at 180 to 280 °C to styrene. This process, first commercialized by Atlantic Richfield, has found large-scale application in a few isolated cases (e.g. Shell (Netherlands), Alcudia (Spain) and Nihon Oxirane (Japan)) it is only viable if there is sufficient demand for propylene oxide. 

---