Ethylene-propylene copolymer thermoplastic

The ethylene-propylene copolymer (thermoplastics and rubbers) stabilization may be achieved by the following mechanisms ... 

Fluoriuated Ethylene Propylene Copolymer Thermoplastic copolymer of tetrafluoroethylene and hexafiuoro-propylene. Has deereased tensile strength and wear and creep resistanee, but good weatherability, dielectric properties, fire and ehemical resistance, and friction. Decomposes above 204°C (400°F), releasing toxic products. Processed by molding, extrusion, and powder coating. Used in chemieal apparatus liners, pipes, containers, bearings, films, eoatings, and cables. Also called FEP. 

Organic peroxides are used in the polymer industry as thermal sources of free radicals. They are used primarily to initiate the polymerisation and copolymerisation of vinyl and diene monomers, eg, ethylene, vinyl chloride, styrene, acryUc acid and esters, methacrylic acid and esters, vinyl acetate, acrylonitrile, and butadiene (see Initiators). They ate also used to cute or cross-link resins, eg, unsaturated polyester—styrene blends, thermoplastics such as polyethylene, elastomers such as ethylene—propylene copolymers and terpolymers and ethylene—vinyl acetate copolymer, and mbbets such as siUcone mbbet and styrene-butadiene mbbet. 

FIGURE 13.13 Schematic representation of thermoplastic elastomers obtained through reaction of maleated ethylene-propylene copolymer (EPM) with polyamide-6 (PA-6). 

PVC, another widely used polymer for wire and cable insulation, crosslinks under irradiation in an inert atmosphere. When irradiated in air, scission predominates.To make cross-linking dominant, multifunctional monomers, such as trifunctional acrylates and methacrylates, must be added. Fluoropolymers, such as copol5miers of ethylene and tetrafluoroethylene (ETFE), or polyvinylidene fluoride (PVDF) and polyvinyl fluoride (PVF), are widely used in wire and cable insulations. They are relatively easy to process and have excellent chemical and thermal resistance, but tend to creep, crack, and possess low mechanical stress at temperatures near their melting points. Radiation has been found to improve their mechanical properties and crack resistance. Ethylene propylene rubber (EPR) has also been used for wire and cable insulation. When blended with thermoplastic polyefins, such as low density polyethylene (LDPE), its processibility improves significantly. The typical addition of LDPE is 10%. Ethylene propylene copolymers and terpolymers with high PE content can be cross-linked by irradiation. ... 

Ethylene propylene rubber (EPR) has been also used for wire and cable insulation. When blended with thermoplastic polyefins such as LDPE its processibility improves significantly. The typical addition of LDPE is 10%. Ethylene propylene copolymers and terpolymers with high PE content can be cross-linked by irradiation.34... 

Phosphorus Phosphate esters and others (halogenated and nonhalogenated) Polyurethane foams, polyesters, and thermoplastics such as flexible PVC, modified PPO, and cellulosics Also polyethylene, polypropylene, polystyrene, and ethylene/propylene copolymers Akzo Nobel, Albemarle, Amfine Chemical Corp., Amspec Chemical, Bayer, Ciba Specialty Chemical-Melapur, Clariant, Cytec, Daihachi Chemical Industry, Great Lakes, Italmatch Chemicals, Nitroil, Rhodia... 

Applications of ethylene-propylene copolymers and terpolymers include automotive (the major use area), thermoplastic olefin elastomers, single-ply roofing, viscosity index improvers for lube oils, wire and cable insulation, hose, appliance parts, and polymer modification. 

Ethylene propylene copolymers and their blends exhibit diverse degradation behavior under the influence of light, heat and radiation. In spite of many papers in this area, little, if any, mechanistic data on degradation and stabilization of this important class of materials is available in the literature. The present paper reviews the published literature in this area organised under five distinct class of materials, namely, thermoplastic, elastomeric, and heterophasic copolymers, thermoplastic elastomer and blends. Of this, elastomeric ethylene-propylene copolymers appears to have been most exhaustively studied. Very few studies have reported on thermoplastic copolymers, both random as well as heterophasic as well as thermoplastic elastomers and blends. Specific mechanisms of degradation and stabilization of each of these classes of materials are discussed. 

Copolymers of ethylene and propylene have come to stay as important materials with diverse practical applications. They span the full range of polymeric properties, from soft elastomers to hard thermoplastics depending on the relative composition of the two monomers and the manner of their enchainment. Ethylene-propylene copolymers are manufactured commercially using Ziegler-Natta catalysts [1]. For the purposes of this discussion, we will treat these copolymers in terms of three distinct classes of materials ... 

With the high-temperature solution polymerization processes, various ethylene homo- and copolymers with different average molecular mass and copolymer compositions are produced. The product portfolio comprises PE-HD, PE-LLD, PE-VLD, and the ethylene/propylene elastomers (EPM, EPDM) (see Figure 2). The thermoplastic products have a wide range of applications [1]. The elastomeric ethylene/propylene copolymers can also be applied widely in the automotive industry, for plastics modification, in industrial applications such as seals, in electrical cables, and in tires [2], Uncured ethylene/propylene copolymers are applicable as viscosity index improvers for lubricant oils [5]. 

ADK Stab LA 77 Bis(2,2,6,6-tetramethyl-4-piperidinyl) decanedioate Bis(2,2,6,6-tetramethyl-4-piperidinyl)-sebacate Decanedioic acid, bis 2,2,6,6-tetramethyl-4-piperidinyl) ester EINECS 258-207-9 HALS 1 HALS 770 Lowilite 77 LS 770 Mark LA 77 Sanol Sanol 770 Sanol LS 700 Sanol LS 770 Sumisorb 577 T 770 TIN 770 Tinuvin 770 Tinuvin 770DF Tinuvin 770LS TK-10665 Uvaseb 770. Light stabilizer for polyolefins, ABS, PUR acrylics, PS and styrene copolymers, thermoplastic elastomers, ethylene-propylene copolymers, polyamides. Ciba-Geigy Corp. En/Chem SpA bowi. 

Nowadays commercial mixtures of bitumens with uncured synthetic elastomers are produced, e.g. ethylene-propylene-diene terpolymers (EPDM), styrene-butadiene sequence copolymers (SBS), and ethylene-acrylic ester-acrylic acid terpolymers (AECM). Mixtures with some thermoplastics are also commercial products, e.g. polyethylene (PE), ethylene-propylene copolymers (EPM), alpha-olefinic copolymers, atactic polypropylene (aPP), and ethylene-vinyl acetate copolymers (EVA). 

N nylon, PO polyolefin, elastomer, TPU thermoplastic urethane, GF glass fiber, NBR nitrile rubber, MAH maleic anhydride, EPR ethylene-propylene copolymer, l ionomer, M- mineral, ABS acrylonitrile-butadiene-styrene copolymer, PPE poly (phenylene ether), R reinforcement, PTFE poly(tetrafluoroethylene), CF° carbon fiber, PEBA poly(etherblockamide), S silicone, RIPP D reaction injection molding plastic, and ASA acrylate-styrene-acrylonitrile copolymer. 

Melt compounding is most commonly utilized for the preparation of PO/silica nanocomposites. POs and their blends, such as PP [326-337], PE [338-343], ethylene-propylene copolymer [344-354], ethylene-octene copolymer [347], thermoplastic POs [348-350], PP/ EPDM [351,352], and PP/liquid-crystalline polymer (LCP) [353-357] blends, have been used as the matrices in the preparation of PO/silica nanosystems and nanomaterials by twin-screw extrusion and injection molding or lab-scale single-screw extrusion and compression molding. 

Thermoplastic polyolefin (TPO) elastomers are typically composed of ethylene propylene rubber (EPR) or ethylene propylene diene M (EPDM) as the elastomeric segment and polypropylene thermoplastic segment. LDPE, HDPE, and LLDPE copolymers ethylene vinyl acetate (EVA), ethylene ethylacrylate (EEA), ethylene, methyl-acrylate (EMA) and polybutene-1 can be used in TPOs. Hydrogenation of polyisoprene can yield ethylene propylene copolymers, and hydrogenation of 1,4- and 1,2-stereoisomers of S-B-S yields ethylene butylene copolymers. ... 

Block copolymers made from ethylene and propylene are valuable industrial materials. They can be used as thermoplastic elastomers and as compatibOizing agents for homopolymer blends. The properties of this type of copolymer depend on the microstructure of the blocks, the relative lengths of the blocks, and the overall molecular v eight. An ABA triblock copolymer structure containing crystalline A blocks and an amorphous B block can exhibit elastomeric behavior. The crystalline "hard" blocks can consist of isotactic or syndiotactic polypropylene (iPP or sPP) units or linear polyethylene (PE). The amorphous "soft" blocks can consist of atactic polypropylene (aPP) or ethylene-propylene copolymer (ethylene-propylene rubber, EPR). 

Pratheep Kumar A, Pal Singh R (2007) Novel hybrid of clay, cellulose, and thermoplastics. I. Preparation and characterization of composites of ethylene-propylene copolymer. J Appl Polym Sci 104 2672-2682... 

Synthetic polymers that are commercially manufactured in the quantity of billions of pounds may be classified in three categories (1) plastics, which include thermosetting resins (e.g., urea resins, polyesters, epoxides) and thermoplastic resins (e.g., low-density as well as high-density polyethylene, polystyrene, polypropylene) (2) synthetic fibers, which include cellulosics (such as rayon and acetate) and noncellulose (such as polyester and nylon) and (3) synthetic rubber (e.g., styrene-butadiene copolymer, polybutadiene, ethylene-propylene copolymer). 

Thermoplastic elastomers Ethylene-propylene copolymer W. Germany 2,646,480 1981 Mitsui Petrochemical... 

---