Propyl vinyl ketone

Catalytic asymmetric methylation of 6,7-dichloro-5-methoxy-2-phenyl-l-indanone with methyl chloride in 50% sodium hydroxide/toluene using M-(p-trifluoro-methylbenzyDcinchoninium bromide as chiral phase transfer catalyst produces (S)-(+)-6,7-dichloro-5-methoxy-2-methyl-2--phenyl-l-indanone in 94% ee and 95% yield. Under similar conditions, via an asymmetric modification of the Robinson annulation enqploying 1,3-dichloro-2-butene (Wichterle reagent) as a methyl vinyl ketone surrogate, 6,7 dichloro-5-methoxy 2-propyl-l-indanone is alkylated to (S)-(+)-6,7-dichloro-2-(3-chloro-2-butenyl)-2,3 dihydroxy-5-methoxy-2-propyl-l-inden-l-one in 92% ee and 99% yield. Kinetic and mechanistic studies provide evidence for an intermediate dimeric catalyst species and subsequent formation of a tight ion pair between catalyst and substrate. 

About 5% of the ethyl radical adduct was isolated in the reaction with r-butyl iodide and about 20% of the ethyl radical adduct was formed in the reaction with i-propyl iodide. These ratios compare quite well with those calculated by using the rate constants for halogen transfer in the above reference and the rate constants for addition of a primary radical to methyl vinyl ketone. 

TRIFLUOROETHYL VINYL ETHER see TKB250 (3,3,3-TRIFLUORO-2-HYDROXY-2-CnUFLUOROMETHYL))PROPYL BENZYL KETONE see TKB285... 

Asymmetric Robinson Annulation. 2-Propyl-1-indanone undergoes Robinson annulation with the catalyst and methyl vinyl ketone (eq 6). Higher ee values were achieved using 1,3-dichloro-2-butene (Wichterle Reagent) as an MVK surrogate for the Michael addition and overall Robinson annulation (eq 9)... 

Preparation of Monomers. Methyl vinyl ketone (MVK) was obtained from Pfizer Chemical Division, New York, and distilled to remove the inhibitor. Methyl isopropenyl ketone (MIPK) was prepared by the aldol condensation of methyl ethyl ketone and formaldehyde, according to the method of Landau and Irany 0. The major impurity in this monomer is ethyl vinyl ketone (5. The monomer was redistilled before use. 3 Ethyl 3 buten 2 one (EB) was prepared by the aldol condensation of methyl propyl ketone and formaldehyde. Ethyl vinyl ketone (EVK) was prepared by a Grignard synthesis of the alcohol, followed by oxidation to the ketone. t-Butyl vinyl ketone (tBVK) was prepared from pinacolone and formaldehyde by the method of Cologne (9). Phenyl vinyl ketone (PVK) was prepared fay the dehydrochlorlnatlon of 0 cbloro propiophenone (Eastman Kodak). Phenyl isopropenyl ketone (PPK) was prepared by the Mannich reaction using propiophenone, formaldehyde and dimethylamine HCl. 

CO. CHa, CO2, acetone, ketene. ethene. propene, 1-butene, benzene, toluene, mesitylene. xylene, methyl ethyl ketone, diethyl ketone, methyl-n-propyt ketone, methyl-n-butyl ketone, ethyl vinyl ketone, methyl propenyl ketone (trace), ethyl propyl ketone (trace), 3-methyl-cydopenlanone, cyclohexanone (trace), cyclohexa-2-enone, 2-methyl-cyclohexanone, 1-methyl-cydohexa-1-ene-3-one (trace), acrolein, mesityl oxide, ethanal, propanal. butanal. chain fragments, some monomer... 

CO, CH4, CO2, acetone, ketene. ethene. propene. 1-butene, benzene, toluene, xylene, cydopentene, methyl ethyl ketone, diethyl ketone, methyl-n-propyl ketone, di-n-propyl ketone, methyl vinyl ketone, methyl Isopropenyl ketone, methyl isopropyl ketone, ethyl vinyl ketone, trace amounts of methyl-n-bulyl ketone, cyclopentanone, cydohexanone. acrolein, ethanal. butanal. chain fragments, some monomer CO. CH4, COj, ketene, 1-butene, propene, acetone, methyl ethyl ketone, methyl n-propyl ketone, 1,4-cyclohexadiene. toluene, l-methy. l.3-cydohexadlene, 2-hexanone, cydopentene, 1-methyl cydopentene. mesityl oxide, xylenes, benzene, ethene, cyclopentanone, 1.3-cyclopentad iene, diethyl ketone, short chain fragments, traces of monomer CO, CH4, COi, ketene, 1-butene, propene, acetone, methyl ethyl ketone, methyl isopropyl ketone, methyl-n-propyl ketone, diethyl ketone, methyl propenyl ketone, 3-hexanone. toluene, 2-hexanone. 1,3-cydopentadiene, cyclopentanone, 2-melhylcydopenlanone, mesityl oxide, xylenes, benzene, propionaldehyde, acrolein, acetaldehyde ethene, short chain fragments, traces of monomer CO, COj, H2O, CH4. acetone, ketene, ethene, propylene, 1-butene, methyl vinyl ketone, benzene, acrylic add, toluene, xylene, short chain fragments such as dimer to octamer with unsaturated and anhydride functionalities... 

Asymmetric Michael additions can also be performed under phase-transfer conditions with an achiral base in the presence of a chiral quaternary ammonium salt as a phase-transfer agent. Conn and coworkers conducted the Michael addition of 2-propyl-l-indanone (13) to methyl vinyl ketone under biphasic conditions (aq 50% NaOH/toluene) using the cinchonine/cinchonidine-derived chiral phase-transfer catalysts (PTCs), 14a and 14b, as a catalyst (Scheme 9.5). However, only low to... 

Methyl vinyl ether/maleic anhydride copolymer. See PVM/MA copolymer 2-Methyl-2-vinyl-5-(a-hydroxyisopropyl) tetrahydrofuran 2-Methyl-2-vinyl-5-(2-hydroxy-2-propyl) tetrahydrofuran. See Linalool oxide Methyl vinyl ketone... 

Polyarylate resin Polyarylether ketone resin Polyester carbonate resin Polyetherimide resin Polyethylene, chlorinated Polyethylene glycol Polyethylene, medium density Poly (p-methylstyrene) Poly (p-methylstyrene), rubber-modified Poly (oxy-1,2-ethanediyloxycarbonyl-2,6-naphthalenediylcarbonyl) resin Poly (oxy-p-phenylenesulfonyl-p-phenyleneoxy-p-phenyleneisopropylidene-p-phenylene) resin Poly (phenyleneterephthalamide) resin Polysulfone resin Poly (tetramethylene terephthalate) Polyvinylidene chloride Potassium sorbate Potato (Solanum tuberosum) starch Silica, colloidal Silicone Sodium N-alkylbenzenesulfonate Sodium bicarbonate Sodium tetraborate pentahydrate Starch, pregelatinized Styrene/acrylates copolymer Styrene/butadiene polymer Styrene/DVB copolymer , 1,1 -Sulfonylbis (4-chlorobenzene) polymer with 4,4 -(1-methylethylidene) bis (phenol) and 4,4 -sulfonylbis (phenol) Synthetic wax Tapioca starch Tetrafluoroethylene/perfluoro (propyl vinyl ether) copolymer Tocopherol Triglycidyl isocyanurate VA/crotonates copolymer Vinyl chloride/ethylene copolymer Wheat (Triticum vulgare) starch... 

The alcohols, proprietary denatured ethyl alcohol and isopropyl alcohol, are commonly used for E-type inks. Many E-type inks benefit from the addition of small amounts of ethyl acetate, MEK, or normal propyl acetate to the solvent blends. Aromatic hydrocarbon solvents are used for M-type inks. Polystyrene resins are used to reduce the cost of top lacquers. T-type inks are also reduced with aromatic hydrocarbons. Acryflc resins are used to achieve specific properties for V-type inks. Vehicles containing vinyl chloride and vinyl acetate copolymer resins make up the vinyl ink category. Ketones are commonly used solvents for these inks. 

EINECS 203-468-6, see Ethylenediamine EINECS 203-470-7, see Allyl alcohol EINECS 203-472-8, see Chloroacetaldehyde EINECS 203-481-7, see Methyl formate EINECS 203-523-4, see 2-Methylpentane EINECS 203-528-1, see 2-Pentanone EINECS 203-544-9, see 1-Nitropropane EINECS 203-545-4, see Vinyl acetate EINECS 203-548-0, see 2,4-Dimethylpentane EINECS 203-550-1, see 4-Methyl-2-pentanone EINECS 203-558-5, see Diisopropylamine EINECS 203-560-6, see Isopropyl ether EINECS 203-561-1, see Isopropyl acetate EINECS 203-564-8, see Acetic anhydride EINECS 203-571-6, see Maleic anhydride EINECS 203-576-3, see m-Xylene EINECS 203-598-3, see Bis(2-chloroisopropyl) ether EINECS 203-604-4, see 1,3,5-Trimethylbenzene EINECS 203-608-6, see 1,3,5-Trichlorobenzene EINECS 203-620-1, see Diisobutyl ketone EINECS 203-621-7, see sec-Hexyl acetate EINECS 203-623-8, see Bromobenzene EINECS 203-624-3, see Methylcyclohexane EINECS 203-625-9, see Toluene EINECS 203-628-5, see Chlorobenzene EINECS 203-630-6, see Cyclohexanol EINECS 203-632-7, see Phenol EINECS 203-686-1, see Propyl acetate EINECS 203-692-4, see Pentane EINECS 203-694-5, see 1-Pentene EINECS 203-695-0, see cis-2-Pentene EINECS 203-699-2, see Butylamine EINECS 203-713-7, see Methyl cellosolve EINECS 203-714-2, see Methylal EINECS 203-716-3, see Diethylamine EINECS 203-721-0, see Ethyl formate EINECS 203-726-8, see Tetrahydrofuran EINECS 203-729-4, see Thiophene EINECS 203-767-1, see 2-Heptanone EINECS 203-772-9, see Methyl cellosolve acetate EINECS 203-777-6, see Hexane EINECS 203-799-6, see 2-Chloroethyl vinyl ether EINECS 203-804-1, see 2-Ethoxyethanol EINECS 203-806-2, see Cyclohexane EINECS 203-807-8, see Cyclohexene EINECS 203-809-9, see Pyridine EINECS 203-815-1, see Morpholine EINECS 203-839-2, see 2-Ethoxyethyl acetate EINECS 203-870-1, see Bis(2-chloroethyl) ether EINECS 203-892-1, see Octane EINECS 203-893-7, see 1-Octene EINECS 203-905-0, see 2-Butoxyethanol EINECS 203-913-4, see Nonane EINECS 203-920-2, see Bis(2-chloroethoxy)methane EINECS 203-967-9, see Dodecane EINECS 204-066-3, see 2-Methylpropene EINECS 204-112-2, see Triphenyl phosphate EINECS 204-211-0, see Bis(2-ethylhexyl) phthalate EINECS 204-258-7, see l,3-Dichloro-5,5-dimethylhydantoin... 

MO calculations have been carried out on the isomerization of cyclopropane to propene, and the MNDO method has been used to study the reaction pathway and to optimize the structure of reactant, transition structure, and product of the ring opening reaction of bicyclo[1.1.0]butane. Various methods have been employed to estimate the rate constants for ring opening of the 2-cyclopropyl-2-propyl radical. 1-Acceptor-1-sulfenyl-substituted 2-vinylcyclopropanes of the type (430) have been found to afford 6-sulfenyl-a,jS y, -unsaturated carboxylic esters and nitriles (431) upon treatment with acid, by a process which involves C(l)—C(2) bond fission and a novel 1,5-sulfenyl rearrangement (see Scheme 110). It has been shown that the benzophenone-sensitized photolysis of vinyl norcaradiene derivatives, such as 5-(2-methylprop-l-enyl)-3-oxatricyclo[4.4.0.0 ]deca-7,9-dien-4-ones (432), results in the regioselective cleavage of only one of the cyclopropyl c-bonds to afford isochroman-3-one derivatives (433). It has been reported that the major product obtained from the reaction of structurally diverse a-diazo ketones with an electron-rich alkene in the... 

The hydroxyl containing terpolymers have solubilities similar to those of the medium-to-low molecular weight vinyl chloride-vinyl acetate copolymers. This resin solubility system is shown in Figure 18. The ketones evaluated were methyl n-butyl ketone and methyl n-propyl ketone. 

---