Procedure specific

Measurement and specification of nitrates or other nitrogen oxide compounds in sulfuric acid is a complex subject. The difficulty occurs because nitrogen oxides are usually present both as nitrous and nitric compounds, predominantiy in the nitrous form. Hence, analytical procedures specific for nitrates only do not give a complete analysis. 

The components of a quality assurance program are designed to serve the two functions just mentioned—control and assessment. Quality control operations are defined by operational procedures, specifications, calibration procedures, and standards and contain the following components ... 

The quality system developed to meet the requirements of ISO/TS 16949 is likely to be a generic system, not specific to any particular product, project, or contract other than the range of products and services which your organization supplies. By implementing the policies and procedures of the documented quality system, product, project, or contract specific plans, procedures, specifications, etc. are generated. ISO 9001 contains a series of quality system requirements, not product quality requirements. For a given product, project, or contract there will be specific product, project, or contract requirements and it is these requirements to which this clause of the standard refers. 

Policies, plans, procedures, specifications, contracts, orders, etc. 

Failure investigation procedure Nonconforming material review procedure Customer complaints procedure Quality system document change procedure Specification change procedure Maintenance procedures... 

The impact of this requirement depends upon what constitutes the specified requirements. The standard does not require you to demonstrate conformance with every requirement of ISO 9001. However, if your customer has invoked ISO 9001 in the contract, this clause requires that you maintain sufficient records to demonstrate compliance. As stated elsewhere in this book, there is no definition clarifying what specified requirements are. If specified requirements are a//the requirements that you have specified in your quality system, your plans, procedures, specifications, etc., this requirement may well be viewed as the most onerous in the standard. A pragmatic approach to take is to declare in your quality manual that the specified requirements are specified customer requirements . 

The safety policy for the company, although common in most parts with the safety policy for every company, may require being prepared in detail. This would naturally cover any process, hazardous product or procedure specific to the organization. In preparing the policy, it is essential to ensure that parts referred to in Section 2(3) of the 1974 Act are covered, i.e. ... 

Documentation - procedures, specifications, retention of records, electronic data... 

Complete manufacturing and control instructions, sampling and testing procedures, specifications, special notations, and precautions to be followed. 

In many instances electrogravimetry must be preceded by a separation between metals suitably this can be an electroseparation by means of constant-current electrolysis as previously described, but more attractively an electroseparation by means of controlled-potential electrolysis at a mercury pool or sometimes at an amalgamated Pt or brass gauze electrode. In this way one can either concentrate the metal of interest on the Hg or remove other metals from the solution alternatively, it can be a rougher separation, i.e., the concentration of a group of metals such as Fe, Ni, Co, Cu, Zn and Cd on the Hg whilst other metals such as alkali and alkaline earth metals, Be, Al, Ti and Zr remain in solution151. In all these procedures specific separation effects can be... 

Repeated measurements of the same measurand on a series of identical measuring samples result in random variations (random errors), even under carefully controlled constant experimental conditions. These should include the same operator, same apparatus, same laboratory, and short interval of the time between measurements. Conditions such as these are called repeatability conditions (Prichard et al. [2001]). The random variations are caused by measurement-related technical facts (e.g., noise of radiation and voltage sources), sample properties (e.g., inhomogeneities), as well as chemical or physical procedure-specific effects. 

Laboratory procedures specific to galactosemia are dealt with below, but a number of other tests are also of value. Liver function tests, though sometimes helpful, are not always informative (see above, Section 2.2). Protein is usually present in the urine in untreated cases, but this occurs in other diseases. Aminoaciduria is a very common finding in galactosemia, though Holzel (H3) states it is absent in some older children with a mild form of galactosemia aminoaciduria occurs in other diseases and is frequently accompanied by proteinuria and glucosuria. 

The procedure specifications and personnel qualifications, testing, and certification shall conform to the requirements of this Chapter and the following ... 

The HRC method may be used for welding procedure qualification if the design stress does not exceed two-thirds of SMYS and the welding procedure specification includes postweld heat treatment. 

Until recently, the lack of uniformly adopted standard test procedures specifically designed for evaluating modified wood has been little more than an inconvenience indeed, the use of different test methods helps to determine which of the tests adopted may be the most appropriate. Due to the rapid changes in this area, with many commercial processes now being adopted, it is now a matter of great urgency to ensure that the appropriate protocols are agreed at an international level. 

The following section illustrates advances made using in vivo microdialysis by describing the contributions of this technique to the study of memory and drug addiction, which are our areas of research interest. In addition, we have chosen two areas that present unique challenges and new apphcations of this procedure, specifically the study of ontological development and the use of in vivo microdialysis in human research... 

This limitation is well Illustrated by the failure of those methods to uncover the presence of another important group, the flavanoid, coumarin and cinnamic acid phenols (85 - 117). On the other hand, some 32 of these compounds were identified when isolation procedures specific for these types of compounds were employed. Using isolation and identification techniques which are particularly useful for alkaloids, it would be possible to determine whether any representatives of this class are present and, if so, to conduct subsequent studies for structure determination. 

Any treatment process that can remove the toxicity-causing constituents can reduce whole-effluent toxicity of a discharge. If the primary cause of effluent toxicity can be identified through the TIE or TRE procedures, specific treatment processes can be incorporated into the existing treatment system to control the toxicity. However, for a complex wastewater such as that from refinery and petrochemical facilities, the cause of toxicity may not be easily identified. The toxicity can be caused by a combination of constituents that exhibit synergistic or antagonistic effects. 

A written standard is used for widely adopted procedures, specifications, technical recommendations etc. 

The experimental setup and the testing procedures specifically needed for the dynamic kinetic investigation will be discussed in the following sections, as well as the relevant methods for data analysis and for parameter estimation. 

If using computer software, procedures specific to the software will need to be followed. 

Recommendation 5-4. The Army should develop and demonstrate methods of chemical analysis to confirm the destruction of VX in the hydrolysate at the Newport facility. These methods should include procedural specifications and provisions for training so that confirmation at the required detection limits can be confirmed by testing by different analysts at multiple laboratories. 

Responsibilities and data collection procedures Test procedures, specific acceptance criteria Documentation procedures Summary and deviation report... 

---