Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Petroleum products, metals

Uses. Manufacture of rayon, mercerized cotton, soap, paper, aluminum, petroleum products metal cleaning electrolytic extraction of zinc tin plating oxide coating... [Pg.636]

Urban Runoff (petroleum products, metals, salts, silts, and sediments)... [Pg.4]

The choice between X-ray fluorescence and the two other methods will be guided by the concentration levels and by the duration of the analytical procedure X-ray fluorescence is usually less sensitive than atomic absorption, but, at least for petroleum products, it requires less preparation after obtaining the calibration curve. Table 2.4 shows the detectable limits and accuracies of the three methods given above for the most commonly analyzed metals in petroleum products. For atomic absorption and plasma, the figures are given for analysis in an organic medium without mineralization. [Pg.38]

Petroleum Products. Condensation products of sahcylaldehyde and amines ate used in various forms for the removal or neutralization of the metallic ions that cause oxidative degradation in petroleum products. The product formed from propylenediamine and sahcylaldehyde, ie,... [Pg.508]

Dimethylethanolamine, diethylethanolaniine, and thek derivatives are used in pesticides, corrosion inhibitors, dmgs and pharmaceuticals, emulsification, paints and coatings, metal fabrication and finishing, petroleum and petroleum products, and plastics and resins (226). [Pg.11]

If the product is essentially identical to that produced by other manufacturers, then the price is determined principally by the commodity market price. However, contract features such as guaranteed deHvery schedules can influence price. Examples of commodity pricing are petrochemicals, petroleum feedstocks, petroleum products, and primary metals. [Pg.445]

Hydrogen fluoride Catalyst in some petroleum refining, etching glass, silicate extraction by-product in electrolytic production of aluminum Petroleum, primary metals, aluminum Strong irritant and corrosive action on all body tissue damage to citrus plants, effect on teeth and bones of cattle from eating plants... [Pg.2174]

Machinery (except electrical) Manufacture of equipment for construction, elevators, moving stairways, conveyors, industrial trucks, trailers, stackers, machine tools, etc. Slag, sand, cores, metal scrap, wood, plastics, resins, rubber, cloth, paints, solvents, petroleum products... [Pg.2233]

Transportation equipment Manufacture of motor vehicles, truck and bus bodies, motor-vehicle parts and accessories, aircraft and parts, ship and boat building, repairing motorcycles and bicycles and parts, etc. Metal scrap, glass, fiber, wood, rubber, plastics, cloth, paints, solvents, petroleum products... [Pg.2233]

Hydrochloric add (HCI) Chemical manufactu well activation re, chlorine, food and rubber production, metal cleaning, petroleum... [Pg.28]

Ammonia is shipped as a liquefied gas under its own vapour pressure of 114 psig (7.9 bar) at 21°C. Uses are to be found in refrigeration, fertilizer production, metal industries, the petroleum, chemical and rubber industries, domestic cleaning agents and water purification. Aqueous solutions of ammonia are common alkaline laboratory reagents ca 0.88 solution is the strongest available. Ammonia gas is expelled on warming. [Pg.276]

In fractionation columns for petroleum products, where the oxygen content is restricted, higher temperatures can be used without excessive waste of the metal. [Pg.65]

The alkali metal hydroxides are also readily absorb CO2 and H2S to form carbonates (or hydrogencarbonates) and sulfides (or hydrogen-sulfides), and are extensively used to remove mercaptans from petroleum products. Amphoteric oxides such as those of Al, Zn, Sn and Pb react with MOH to form aluminates, zincates, stannates and plumbates, and even SiC>2 (and silicate glasses) are attacked. [Pg.87]

The salts content of soils may be markedly altered by man s activities. The effect of cathodic protection will be discussed later in this section. Fertiliser use, particularly the heavy doses used in lawn care, introduces many chemicals into the soil. Industrial wastes, salt brines from petroleum production, thawing salts on walks and roads, weed-killing salts at the base of metal structures, and many other situations could be cited as examples of alteration of the soil solution. In tidal areas or in soils near extensive salt deposits, depletion of fresh ground-water supplies has resulted in a flow of brackish or salty sea water into these soils, causing increased corrosion. [Pg.384]

Test method for porosity in gold platings on metal substrates by gas exposures Test method for half-cell potentials of uncoated reinforcing steel in concrete Method for detection of copper corrosion from petroleum products by the copper strip tarnish test... [Pg.1098]

Hydrogen sulphide occurs naturally, e.g. in natural gas and petroleum, volcanic gases, and from decaying organic matter. It may be present near oil wells and where petroleum is processed. Commercially it is obtained as a by-product from many chemical reactions including off-gas in the production of some synthetic polymers (e.g. rayon, nylon) from petroleum products, and by the action of dilute mineral acids on metal sulphides. Physical properties are summarized in Table 9.14 and effects of temperature on vapour pressure are shown in Figure 9.5. [Pg.286]

Sulfur for commercial purposes is derived mainly from native elemental sulfur mined by the Frasch process. Large quantities of sulfur are also recovered from the roasting of metal sulfides and the refining of crude oil, i.e., from the sulfur by-products of purified sour natural gas and petroleum (the designation sour is generally associated with high-sulfur petroleum products). Reserves of elemental sulfur in evaporite and volcanic deposits and of sulfur associated with natural gas,... [Pg.4]

Society, of course, is in need of metals such as titanium to produce jet engines for aircraft, as much as it needs petroleum products as a source of fuel for their running. Like oil, mineral deposits do not regenerate themselves when they are exhausted. While there exists no threat from any immediate scarcity of mineral sources, if these are to be recovered with minimum or practically no impact on the environment, then it is required that society pays more for these products in order to meet the additional costs incurred when implementing an environmentally benign mining operation. [Pg.765]

Various immobilization and stabilization methods can be applied to soils contaminated with heavy metals, petroleum products, PCB, peroxyacetyl nitrate (PAN), and so on.17 The disadvantages of immobilization and stabilization methods include the following ... [Pg.630]

Washing with water may be used for the dissolution of soluble metallic ions and desorption of adsorbed metals and organics (such petroleum products), as long as the soil has high water affinity. [Pg.638]

The technique is used predominantly for the isolation of a single chemical species prior to a determination and to a lesser extent as a method of concentrating trace quantities. The most widespread application is in the determination of metals as minor and trace constituents in a variety of inorganic and organic materials, e g. the selective extraction and spectrometric determination of metals as coloured complexes in the analysis of metallurgical and geological samples as well as for petroleum products, foodstuffs, plant and animal tissue and body fluids. [Pg.69]

Table 5.8 gives an indication of the range of elements that may be determined. Most procedures will require an analyte concentration of 10-3 mol dm 3 or more, although with special conditions, notably potentiometric end-point detection, the sensitivity may be extended to 1(H mol dm 3. The analysis of mixtures of metal ions necessitates masking and demasking, pH adjustments and selective separation procedures. Areas of application are spread throughout the chemical field from water treatment and the analysis of refined food and petroleum products to the assay of minerals and alloys. Table 5.10 gives some selected examples. [Pg.213]

Atomic absorption spectrometry is one of the most widely used techniques for the determination of metals at trace levels in solution. Its popularity as compared with that of flame emission is due to its relative freedom from interferences by inter-element effects and its relative insensitivity to variations in flame temperature. Only for the routine determination of alkali and alkaline earth metals, is flame photometry usually preferred. Over sixty elements can be determined in almost any matrix by atomic absorption. Examples include heavy metals in body fluids, polluted waters, foodstuffs, soft drinks and beer, the analysis of metallurgical and geochemical samples and the determination of many metals in soils, crude oils, petroleum products and plastics. Detection limits generally lie in the range 100-0.1 ppb (Table 8.4) but these can be improved by chemical pre-concentration procedures involving solvent extraction or ion exchange. [Pg.333]


See other pages where Petroleum products, metals is mentioned: [Pg.121]    [Pg.174]    [Pg.121]    [Pg.174]    [Pg.13]    [Pg.245]    [Pg.131]    [Pg.256]    [Pg.257]    [Pg.220]    [Pg.81]    [Pg.103]    [Pg.105]    [Pg.57]    [Pg.1043]    [Pg.294]    [Pg.28]    [Pg.139]    [Pg.7]    [Pg.88]    [Pg.284]    [Pg.638]    [Pg.6]    [Pg.65]    [Pg.518]    [Pg.1581]   
See also in sourсe #XX -- [ Pg.137 ]




SEARCH



Metal Analysis of Virgin and Crude Petroleum Products

Metals in Crude Oils and Petroleum Products

Petroleum metals

Petroleum products

Petroleum, production

Production metals

© 2024 chempedia.info