Other Metallated Ethers

Lithium hydride is perhaps the most usehil of the other metal hydrides. The principal limitation is poor solubiUty, which essentially limits reaction media to such solvents as dioxane and dibutyl ether. Sodium hydride, which is too insoluble to function efficiently in solvents, is an effective reducing agent for the production of silane when dissolved in a LiCl—KCl eutectic at 348°C (63—65). Magnesium hydride has also been shown to be effective in the reduction of chloro- and fluorosilanes in solvent systems (66) and eutectic melts (67). 

Anhydrous sulfonic acids, particularly linear alkylben2enesulfonic acids, are typically stored ia stainless steel containers, preferably type 304 or 316 stainless steel. Use of other metals, such as mild steel, contaminates the acid with iron (qv), causiag a darkening of the acid over time (27). The materials are usually viscous oils which may be stored and handled at 30—35°C for up to two months (27). AH other detergent-grade sulfonic acids, eg, alcohol sulfates, alcohol ether sulfates, alpha-olefin sulfonates, and alpha-sulfomethyl esters, are not stored owiag to iastabiUty. These are neutrali2ed to the desired salt. 

Substitution at the Carbon—Chlorine Bond. Vinyl chloride is generally considered inert to nucleophilic replacement compared to other alkyl halides. However, the chlorine atom can be exchanged under nucleophilic conditions in the presence of palladium [7440-05-3] Pd, and certain other metal chlorides and salts. Vinyl alcoholates, esters, and ethers can be readily produced from these reactions. 

Special containers have been developed for anesthetic ether to prevent deterioration before use. Their effectiveness as stabHizers usuaHy depends on the presence of a lower oxide of a metal having more than one oxidation state. Thus the sides and the bottoms of tin-plate containers are electroplated with copper, which contains a smaH amount of cuprous oxide. Staimous oxide is also used in the linings for tin containers. Instead of using special containers, iron wire or certain other metals and aHoys or organic compounds have been added to ether to stabHize it. 

Greater selectivity in purification can often be achieved by making use of differences in chemical properties between the substance to be purified and the contaminants. Unwanted metal ions may be removed by precipitation in the presence of a collector (see p. 54). Sodium borohydride and other metal hydrides transform organic peroxides and carbonyl-containing impurities such as aldehydes and ketones in alcohols and ethers. Many classes of organic chemicals can be purified by conversion into suitable derivatives, followed by regeneration. This chapter describes relevant procedures. 

A remarkable feature of the Birch reduction of estradiol 3-methyl ether derivatives, as well as of other metal-ammonia reductions, is the extreme rapidity of reaction. Sodium and -butyl alcohol, a metal-alcohol combination having a comparatively slow rate of reduction, effects the reduction of estradiol 3-methyl ether to the extent of 96% in 5 minutes at —33° lithium also effects complete reduction under the same conditions as is to be expected. Shorter reaction times were not studied. At —70°, reduction with sodium occurs to the extent of 56 % in 5 minutes, although reduction with lithium is virtually complete (96%) in the same time. (The slow rates of reduction of compounds of the 5-methoxytetralin type is exemplified by 5-methoxy-tetralin itself with sodium and f-butyl alcohol reduction occurs to the extent of only 50% in 6 hours vs. 99+% with lithium.) The iron catalyzed reaction of sodium with alcohols must be very fast since it competes so well with the rapid Birch reduction. One cannot compensate for the presence of iron in a Birch reduction mixture containing sodium by adding additional metal to extend the reaction time. The iron catalyzed sodium-alcohol reaction is sufficiently rapid that the aromatic steroid still remains largely unreduced. 

For the deprotonation of less acidic precursors, which do not lead to mesomerically stabilized anions, butyllithium/TMEDA in THF or diethyl ether, or the more reactive, but more expensive,. seobutyllithium under these conditions usually are the most promising bases. Het-eroatomic substitution on the allylic substrate, which docs not contribute to the mesomeric or inductive stabilization often facilitates lithiation dramatically 58. In lithiations, in contrast to most other metalations, the kinetic acidity, caused by complexing heteroatom substituents, may override the thermodynamic acidity, which is estimated from the stabilization of the competing anions. These directed lithiations59 should be performed in the least polar solvent possible, e.g.. diethyl ether, toluene, or even hexane. 

The chemistry of indium metal is the subject of current investigation, especially since the reactions induced by it can be performed in aqueous solution.15 The selective reductions of ethyl 4-nitrobenzoate (entry 1), 2-nitrobenzyl alcohol (entry 2), l-bromo-4-nitrobenzene (entry 3), 4-nitrocinnamyl alcohol (entry 4), 4-nitrobenzonitrile (entry 5), 4-nitrobenzamide (entry 6), 4-nitroanisole (entry 7), and 2-nitrofluorenone (entry 8) with indium metal in the presence of ammonium chloride using aqueous ethanol were performed and the corresponding amines were produced in good yield. These results indicate a useful selectivity in the reduction procedure. For example, ester, nitrile, bromo, amide, benzylic ketone, benzylic alcohol, aromatic ether, and unsaturated bonds remained unaffected during this transformation. Many of the previous methods produce a mixture of compounds. Other metals like zinc, tin, and iron usually require acid-catalysts for the activation process, with resultant problems of waste disposal. 

A normal-phase HPLC separation seems to be useful to separate major chlorophyll derivatives, but it is not compatible with samples in water-containing solvents an additional extraction step is required to eliminate water from the extract since its presence rednces chromatographic resolution and interferes with retention times. Besides that, the analysis cannot be considered quantitative due to the difhculty in transferring componnds from the acetone solution into the ether phase. On the other hand, an advantage of the normal-phase method is its efficacy to separate magne-sinm-chlorophyll chelates from other metal-chelated chlorophyll derivatives. ... 

Certain other metal ions also exhibit catalysis in aqueous solution. Two important criteria are rate of ligand exchange and the acidity of the metal hydrate. Metal hydrates that are too acidic lead to hydrolysis of the silyl enol ether, whereas slow exchange limits the ability of catalysis to compete with other processes. Indium(III) chloride is a borderline catalysts by these criteria, but nevertheless is effective. The optimum solvent is 95 5 isopropanol-water. Under these conditions, the reaction is syn selective, suggesting a cyclic TS.63... 

See fluorinated cyclopropenyl methyl ethers See other metal alkoxides... 

See Diethyl ether, above See also nitrating agents See other METAL NITRATES... 

A similar study was undertaken on the related crown ether systems 201 <2001PS29>. They all showed moderate extraction of both Ag(l) and Hg(ll) ions and so were less selective than compounds 184a and 184b from the previous study. However, the presence of the benzo-15-crown-5 substituent offered the simultaneous complexation of the hard alkali cation Na(l) as well as the thiophilic metals Ag(l) and Hg(n) by the thieno sulfur. Interestingly, this second extraction was not influenced by the presence of the other metal. 

See Aluminium Diethyl ether See other metal dusts... 

See Almninium Diethyl ether See other METAL DUSTS... 

Treatment with hydrochloric acid dissolves scandium and other metals. The solution is treated with sodium thiocyanate and extracted with ether. Scandium converted to its oxide SC2O3 is separated from the solvent extract by ion exchange. 

The oxygen as heteroatom in ethers or carbonyl compounds is weak to moderate Lewis base. Nevertheless, a highly reactive metal carbene complex can interact with the oxygen to generate oxygen ylide. The interaction between ether and metal carbene functional groups is believed to be rather weak as demonstrated by the facts that other metal carbene reactions, such as G-H insertion and cyclopropanation, can proceed in ethereal solvents." These experiments demonstrate that the formation of the metal ylide is much less favored in the equilibrium shown in Equation (1). ... 

---