Reduction Procedures

All experimental data from the literature were entered into a spreadsheet program in the units of the original source. Different sources of data using the same experimental technique were entered into copies of the appropriate spreadsheet to assure that the same data reduction technique was applied. 

The pure polymer data base contains pressure-volume-temperature data. The data were first entered into a spreadsheet file in the form given by the author. The data were then converted to standard SI units and written to an ASCII file in the standard format developed for these files. 

The standard state used for the finite concentration data was usually the pure solvent at the temperature and pressure of the mixture. In most cases, the Poynting correction (pressure effect on the liquid) could be neglected. The end result of this approximation is that saturation pressure appears in the expression for the activity coefficient, but not the system pressure. 

In the sections that follow the techniques used for reducing experimental quantities to weight fractions and weight fraction activity coefficients are described. For the solvents, pure component liquid densities and second virial coefficients were often required and were obtained from Daubert and Danner (1990). 

---

Common catalyst compositions contain oxides or ionic forms of platinum, nickel, copper, cobalt, or palladium which are often present as mixtures of more than one metal. Metal hydrides, such as lithium aluminum hydride [16853-85-3] or sodium borohydride [16940-66-2] can also be used to reduce aldehydes. Depending on additional functionahties that may be present in the aldehyde molecule, specialized reducing reagents such as trimethoxyalurninum hydride or alkylboranes (less reactive and more selective) may be used. Other less industrially significant reduction procedures such as the Clemmensen reduction or the modified Wolff-Kishner reduction exist as well. 

In those reactions where the fV-oxide group assists electrophilic or nucleophilic substitution reactions, and is not lost during the reaction, it is readily removed by a variety of reductive procedures and thus facilitates the synthesis of substituted derivatives of pyrazine, quinoxaline and phenazine. 

A number of reductive procedures have found general applicability. a-Azidoketones may be reduced catalytically to the dihydropyrazines (80OPP265) and a direct conversion of a-azidoketones to pyrazines by treatment with triphenylphosphine in benzene (Scheme 55) has been reported to proceed in moderate to good yields (69LA(727)23l). Similarly, a-nitroketones may be reduced to the a-aminoketones which dimerize spontaneously (69USP3453279). The products from this reaction are pyrazines and piperazines and an intermolecular redox reaction between the initially formed dihydropyrazines may explain their formation. Normally, if the reaction is carried out in aqueous acetic acid the pyrazine predominates, but in less polar solvents over-reduction results in extensive piperazine formation. 

The data-reduction procedure just desciiDed provides parameters in the correlating equation for g that make the 8g residuals scatter about zero. This is usually accomphshed by finding the parameters that minimize the sum of squares of the residuals. Once these parameters are found, they can be used for the calculation of derived values of both the pressure P and the vapor composition y. Equation (4-282) is solved for yjP and written for species 1 and for species 2. Adding the two equations gives... 

Toluene is a useful co-solvent in metal-ammonia reductions as first reported by Chapman and his colleagues. The author has found that a toluene-tetrahydrofuran-ammonia mixture (1 1 2) is a particularly useful medium for various metal-ammonia reductions. Procedure 8a (section V) describes the reduction of 17-ethyl-19-nortestosterone in such a system. Ethylene dibromide is used to quench excess lithium. Trituration of the total crude reduction product with methanol affords an 85% yield of 4,5a-dihydro-17-ethyl-19-nortestosterone, mp 207-213° (after sintering at 198°), reported mp 212-213°. For the same reduction using Procedure 5 (section V), Bowers et al obtained a 60% yield of crude product, mp, 196-199°, after column chromatography of the total reduction product. A similar reduction of 17-ethynyl-19-nortestosterone is described in Procedure 8b (section V). The steroid concentration in the toluene-tetrahydrofuran-ammonia system is 0.05 M whereas in the ether-dioxane-ammonia system it is 0.029 M. 

After completion of the reaction, the mixture is diluted with water, extracted with ether and the residue from the ether phase purified by chromatography and/or recrystallization. If the substrate contains aromatic protons, the reduction procedure is repeated in protic medium to back exchange deuteriums incorporated into the aromatic ring. 

While the reductive procedure appears simpler, it also provides a higher proportion of the A -double bond isomer on dehydration than is obtained from the tertiary carbinol. This may be a consequence of the lower steric requirements of a A -olefin having only one alkyl group attached to C-20. In either case, all other double bonds must be protected before the ozonolysis and other free hydroxyls should be esterified prior to dehydration at C-20. 

The Meerwein-Ponndorf-Verley procedure has largely been replaced by reduction procedures that use lithium aluminum hydride, sodium borohydride or derivatives thereof. The Meerwein-Ponndorf-Verley reduction however has the advantage to be a mild and selective method, that does not affect carbon-carbon double or triple bonds present in the substrate molecule. 

A recently discovered reduction procedure provides a convenient route to axial alcohols in cyclohexyl derivatives (5). The detailed mechanism of the reaction remains to be elucidated, but undoubtedly the reducing agent is an iridium species containing one or more phosphate groups as ligands. In any case, it is clear that the steric demands of the reducing agent must be extraordinary since the stereochemical outcome of the reaction is so specific. The procedure below is for the preparation of a pure axial alcohol from the ketone. 

Alkaline hydrolysis of the crude adduct formed with benzaldehyde, followed by treatment with diazomethane and column chromatography, affords methyl (2R,3S)-3-hydroxy-2-methyl-3-phenylpropanoate in 96% ee. Reduction of the crude products formed in the reactions with 2-inethylpropanal and 2,2-dimethylpropanal leads to the corresponding 1,3-diols with >96% ee. In both the hydrolysis and the reduction procedures, the chiral auxiliary reagent, 1,1,2-triphenyl-1,2-ethanediol, can be recovered and reused72. 

The palladium was in the form of a sponge for investigations in the temperature range +40° to —40°C, and in the form of wire for higher temperatures. The samples were activated by an oxidation-reduction procedure. It seems likely that Scholten and Konvalinka studied the effect of... 

The reason for the ultramicrochemical test was to establish whether the bismuth phosphate would carry the plutonium at the concentrations that would exist at the Hanford extraction plant. This test was necessary because it did not seem logical that tripositive bismuth should be so efficient in carrying tetrapositive plutonium. In subsequent months there was much skepticism on this point and the ultramicrochemists were forced to make repeated tests to prove this point. Thompson soon showed that Pu(Vl) was not carried by bismuth phosphate, thus establishing that an oxidation-reduction cycle would be feasible. All the various parts of the bismuth-phosphate oxidation-reduction procedure, bulk reduction via cross-over to a rare earth fluoride oxidation-reduction step and final isolation by precipitation of plutonium (IV) peroxide were tested at the Hanford concentrations of... 

The chemistry of indium metal is the subject of current investigation, especially since the reactions induced by it can be performed in aqueous solution.15 The selective reductions of ethyl 4-nitrobenzoate (entry 1), 2-nitrobenzyl alcohol (entry 2), l-bromo-4-nitrobenzene (entry 3), 4-nitrocinnamyl alcohol (entry 4), 4-nitrobenzonitrile (entry 5), 4-nitrobenzamide (entry 6), 4-nitroanisole (entry 7), and 2-nitrofluorenone (entry 8) with indium metal in the presence of ammonium chloride using aqueous ethanol were performed and the corresponding amines were produced in good yield. These results indicate a useful selectivity in the reduction procedure. For example, ester, nitrile, bromo, amide, benzylic ketone, benzylic alcohol, aromatic ether, and unsaturated bonds remained unaffected during this transformation. Many of the previous methods produce a mixture of compounds. Other metals like zinc, tin, and iron usually require acid-catalysts for the activation process, with resultant problems of waste disposal. 

The reduction procedure described above was carried out in a static system in order to facilitate determination of the extent of reduction in situ. The reduction was monitored gravimetrically using a microbalance (Cl Electronics MK II) and volumetrically by measuring the decrease in hydrogen pressure. Total surface areas were determined by the BET method using nitrogen at 77 K. 

Iron was present as Fe " in the calcined precursors. For all the catalysts the reduction procedure described in Sec. 2.1 resulted in incomplete reduction of the Fe to metallic iron. This is in agreement with the findings of previous authors [6,11]. The individual percentage reductions of Fe to Fe°, as determined by the separate gravimetric and volumetric measurements (Sec. 2.2), are shown in Table 1. The values are calculated on the assumption that all the Fe is reduced to Fe prior to the onset of reduction to Fe°. There is good agreement between the two methods. Table 1 also records the actual Fe/(Fe + Mg) ratio in the catalysts as determined by atomic absorption spectroscopy (AAS) on the calcined precursors. 

Technetium is usually supplied in the form of heptavalent pertechnetate. Consequently, the syntheses of technetium complexes is necessarily accompanied by the reduction of pertechnetate. When concentrated hydrochloric acid is employed as a reductant, tetrachlorooxotechnetate(V) complexes can easily be obtained. A further reduction procedure is required to obtain hexachlorotech-netate(IV). Using these complexes, a number of technetium complexes have been synthesized by ligand substitution. The importance of preparative substitution reactions also increases in the light of the design and preparation of radiopharmaceuticals labelled with 99mTc and 188Re. 

Dining distillation of 2-propanol recovered from the reduction of crotonaldehyde with isopropanol/aluminium isopropoxide, a violent explosion occurred. This was attributed to peroxidised diisopropyl ether (a possible by-product) or to peroxidised crotonaldehyde. An alternative or additional possibility is that the isopropanol may have contained traces of a higher secondary alcohol (e.g. 2-butanol) which would be oxidised during the Meerwein-Ponndorf reduction procedure to 2-butanone. The latter would then effectively sensitise the isopropanol or other peroxidisable species to peroxidation. 

Cationic/reductive domino processes were first described in 2003, and are consequently among the youngest domino procedures described in this book. To date, only two (albeit very useful) examples typifying a combination of a cationic reaction with a reduction procedure have been identified. 

Anion-triggered reactions, as discussed earlier in Chapter 2, embody transformations in most cases, in which a nucleophile acts as the attacking species towards an electrophile. Since oxidation and reduction procedures are well established for providing nucleophilic or electrophilic functionalities, they can be combined with anionic process. 

While the most reactive Mg was produced using the lithium reduction procedure in the presence of alumina, the presently preferred method is entry 11. Though not as reactive as 10, it is more reproducible. The procedures which do not employ alumina also extend equipment life and are thus safer. 

The pioneering work of Posner, on the reduction of carbonyl compounds with isopropyl alcohol and alumina [116], has now been adapted to an expeditious solvent-free reduction procedure that utilizes aluminum alkoxides under microwave irradiation conditions (Scheme 6.37) [117]. 

Decy 1-5-methoxy-1 -naphthol reduction procedure, benzyl alcohol reduction, 121... 

---