Methyl methacrylate fibers

Dong, H., Strawhecker, KE., Snyder, J.F., Orlicki, J.A., Reiner, R.S., Rudie, A.W. Cellulose nanocrystals as a reinforcing material for electrospun poly(methyl methacrylate) fibers formation, properties and nanomechanical characterization. Carbohydr. Polym. 87, 2488-2495 (2012)... 

A low cost solution for the radiation exposure monitoring is offered by the implementation of poly (methyl methacrylate) fibers, whose online response is reliable on the dose range fi om 30 Gy to 45 kGy [0901]. The large advantage of this kind of radiation sensor is the online transmission of recorded signals. These fibers are proper monitors for dose appraisal in harsh environments, whose several hundred meters from the control post prevail the quick change of dosimeter. 

VA2 Vandeweerdt, P., De Cooman, R., Berghmans, H., and Meijer, H., Gel spinning of porous poly(methyl methacrylate) fibers. Polymer, 35, 5141, 1994. 

A review covers the preparation and properties of both MABS and MBS polymers (75). Literature is available on the grafting of methacrylates onto a wide variety of other substrates (76,77). Typical examples include the grafting of methyl methacrylate onto mbbers by a variety of methods chemical (78,79), photochemical (80), radiation (80,81), and mastication (82). Methyl methacrylate has been grafted onto such substrates as cellulose (83), poly(vinyl alcohol) (84), polyester fibers (85), polyethylene (86), poly(styrene) (87), poly(vinyl chloride) (88), and other alkyl methacrylates (89). 

Optics. Good optical properties and low thermal resistance make poly(methyl methacrylate) polymers well suited for use as plastic optical fibers. The manufacturing methods and optical properties of the fibers have been reviewed (124) (see Fiber optics). Methods for the preparation of Fresnel lenses and a Fresnel lens film have been reported (125,126). Compositions and methods for the industrial production of cast plastic eyeglass lenses are available (127). 

Polymerization and Spinning Solvent. Dimethyl sulfoxide is used as a solvent for the polymerization of acrylonitrile and other vinyl monomers, eg, methyl methacrylate and styrene (82,83). The low incidence of transfer from the growing chain to DMSO leads to high molecular weights. Copolymerization reactions of acrylonitrile with other vinyl monomers are also mn in DMSO. Monomer mixtures of acrylonitrile, styrene, vinyUdene chloride, methallylsulfonic acid, styrenesulfonic acid, etc, are polymerized in DMSO—water (84). In some cases, the fibers are spun from the reaction solutions into DMSO—water baths. 

Cyanohydrins are used primarily as intermediates in the production of other chemicals. Manufacture of methyl methacrylate, used to make acrylic mol ding resins and clear sheet, eg, Plexiglas acrylic sheet, from acetone cyanohydrin is the most economically important cyanohydrin process (see Methacrylic polymers). Cyanohydrins are also used as solvents in appHcations including fiber-spinning and metals refining. Cyanohydrins and derivatives reportedly act as antiknock agents in fuel oil and motor fuels and serve as electrolytes in electrolytic capacitors. 

Pure polymeric acrylonitrile is not an interesting fiber and it is virtually undyeable. In order to make fibers of commercial iaterest acrylonitrile is copolymerized with other monomers such as methacrylic acid, methyl methacrylate, vinyl compounds, etc, to improve mechanical, stmctural, and dyeing properties. Eibers based on at least 85% of acrylonitrile monomer are termed acryHc fibers those containing between 35—85% acrylonitrile monomer, modacryhc fibers. The two types are in general dyed the same, although the type and number of dye sites generated by the fiber manufacturing process have an influence (see Eibers, acrylic). 

Because the polymer degrades before melting, polyacrylonitrile is commonly formed into fibers via a wet spinning process. The precursor is actually a copolymer of acrylonitrile and other monomer(s) which are added to control the oxidation rate and lower the glass transition temperature of the material. Common copolymers include vinyl acetate, methyl acrylate, methyl methacrylate, acrylic acid, itaconic acid, and methacrylic acid [1,2]. 

Oya, A., Kimura, M., Sugo, T., Katakai, A., Abe, Y., Iizuka, T., Makiyama, N., Linares-Solano, A, and de Lecea, C. S. M., Antibacterial activated carbon fiber derived from methyl methacrylate grafted phenolic resin fiber, Carbon, 1994, 32(1), 107 110. 

Polymethines, typical soluble dye applications, 7 376t Polymethylene, 20 149 Polymethylene wax, 26 220 Poly(methyl methacrylate) hollow fiber membranes, 16 21 Poly(methyl methacrylate) sheet, properties of, 16 292t Poly(methyl methacrylate) (PMMA),... 

Peracetic acid, formed in situ from acetic acid and hydrogen peroxide in acid aqueous solution, was found to initiate graft copolymerization of vinyl monomers, e.g. methyl methacrylate and 4-vinyl pyridine, onto wood and cellulosic fibers at a good rate (1-3 h time) at 60°C2. The initiati on reaction is not specific for grafting and considerable amounts of homopolymer is formed. 

Although there are many variations on how carbon fibers are made, the typical process starts with the formation of PAN fibers from a conventional suspension or solution polymerization process between a mixture of acrylonitrile plastic powder with another plastic, such as methyl acrylate or methyl methacrylate, and a catalyst. The product is then spun into fibers, with the use of different methods, in order to be able to achieve the internal atomic structure of the fiber. After this, the fibers are washed and stretched to the desired fiber diameter. This step is sometimes called "spinning" and is also vital in order to align the molecules inside the fiber and thus provide a good basis for the formation of firmly bonded carbon crystals after carbonization [7]. 

Smaller volumes of methanol are used in the production of dimethyl terephthalate that goes into polyester fibers and in methyl methacrylate, which goes into plastics. 

Uses Copolymerized with methyl acrylate, methyl methacrylate, vinyl acetate, vinyl chloride, or 1,1-dichloroethylene to produce acrylic and modacrylic fibers and high-strength fibers ABS (acrylonitrile-butadiene-styrene) and acrylonitrile-styrene copolymers nitrile rubber cyano-ethylation of cotton synthetic soil block (acrylonitrile polymerized in wood pulp) manufacture of adhesives organic synthesis grain fumigant pesticide monomer for a semi-conductive polymer that can be used similar to inorganic oxide catalysts in dehydrogenation of tert-butyl alcohol to isobutylene and water pharmaceuticals antioxidants dyes and surfactants. 

Bauer et al. describe the use of a noncontact probe coupled by fiber optics to an FT-Raman system to measure the percentage of dry extractibles and styrene monomer in a styrene/butadiene latex emulsion polymerization reaction using PLS models [201]. Elizalde et al. have examined the use of Raman spectroscopy to monitor the emulsion polymerization of n-butyl acrylate with methyl methacrylate under starved, or low monomer [202], and with high soUds-content [203] conditions. In both cases, models could be built to predict multiple properties, including solids content, residual monomer, and cumulative copolymer composition. Another study compared reaction calorimetry and Raman spectroscopy for monitoring n-butyl acrylate/methyl methacrylate and for vinyl acetate/butyl acrylate, under conditions of normal and instantaneous conversion [204], Both techniques performed well for normal conversion conditions and for overall conversion estimate, but Raman spectroscopy was better at estimating free monomer concentration and instantaneous conversion rate. However, the authors also point out that in certain situations, alternative techniques such as calorimetry can be cheaper, faster, and often easier to maintain accurate models for than Raman spectroscopy, hi a subsequent article, Elizalde et al. found that updating calibration models after... 

Hild, D.N. and Schwartz, P. (1992b). Plasma treated ultrahigh strength polyethylene fibers. Part 11. Increased adhesion to poly(methyl methacrylate). J. Adhesion Sci Technol. 6, 897-917. 

Isotactic poly(methyl methacrylate), also, is an intricate case, resolved only after a 20-year debate. The repetition period along the chain axis is 10.40 A corresponding to S monomer units the entire cell contains 20 monomer units (four chains). At first, the stmcture was resolved as a 5/1 helix (183) with = 180° and 62 — 108° but no reasonable packing was found using this assumption. Further conformational calculations showed that helices like 10/1 or 12/1 should be more stable than the 5/1 helix. The structure was solved by Tadokoro and co-workers (153b) who proposed the presence of a double helix. Two chains, with the same helical sense and the same direction but displaced by 10.40 A one from the other are wound on each other, each chain having 10 monomer units per turn [i(10/l)] and a 20.80-A repeat period. As a result, the double helix has a 10.40-A translational identity period, identical to that found in the fiber spectmm. The conformational parameters are Of = 179° and 2 = -148°. Energy calculations indicate that the double helix is more stable by 4.4 kcal per-mole of monomer units than two isolated 10/1 helices, a result that is in line with the well-known capacity of this polymer to form complexes in solution (184). 

Polyacrylonitrile and acrylic fibers Poly(methyl methacrylate)... 

---