Metal oxide semiconductor transistor MOSFET

Different types of SiC Field Effect Transistors, Metal Oxide Semiconductor Transistors (MOSFETs), Metal Semiconductor Field Effect Transistors (MESFETs), and Junction Field Effect Transistors (JFETs) compete for future applications in high temperature and harsh environment electronics. This Datareview details these various types of FETs, the structures used and the performances obtained. Interesting recent developments and potential applications, such as FET integrated circuits, a hybrid operational amplifier and an inverter circuit are also outlined. 

Field-effect transistors (FETs) Heterojunction bipolar transistors (HBTs) High electron mobility transistors (HEMTs) Metal oxide semiconductor FETs (MOSFETs) Single-electron transistors (SETs) Single-heterojunction HBTs (SH-HBTs) Thin-film transistors (TFTs) hydrogenated amorphous silicon in, 22 135... 

The basic idea that guides the insulated-gate field-effect transistor (FET) traces back to the mid-1920s [14], but it was not until 1960 that this early concept could be successfully demonstrated, with the invention of the metal-oxide-semiconductor FET (MOSFET) [15]. Field-effect measurements on copper phthalocyanine films were... 

Field-effect transistors exist in two major types the junction FET (JFET) and the metal-oxide-semiconductor FET (MOSFET). The junction FET has a... 

Metal-oxide-semiconductor FETs (MOSFETs) were also prepared by electrochemical polymerization using PPy and N-alkyl substituted PPy films, including poly (N-methylpyrrole) (PNMePy) and poly (N-ethylpyrrole) (PNEtPy) as a p-type semiconductor and p-toluenesulfonic acid monohydrate as a supporting electrolyte [168]. Figure 8.93 represents the cross-sectional view of the fabricated MOSFET. The mobility of PPy and PNEtPy FETs was 1.7 cm s, which is close to the value of silicon inorganic transistors [168]. 

MOSFET. See Metal oxide semiconductor field-effect transistor. 

Nanocrystals are receiving significant attention for nano-electronics application for the development of future nonvolatile, high density and low power memory devices [1-3]. In nanocrystal complementary metal oxide semiconductor (CMOS) memories, an isolated semiconductor island of nanometer size is coupled to the channel of a MOS field effect transistor (MOSFET) so that the charge trapped in the island modulates the threshold voltage of the transistor (Fig. 1). 

The ISFET is an electrochemical sensor based on a modification of the metal oxide semiconductor field effect transistor (MOSFET). The metal gate of the MOSFET is replaced by a reference electrode and the gate insulator is exposed to the analyte solution or is coated with an ion-selective membrane as illustrated in Fig. 

The operation principle of these TFTs is identical to that of the metal-oxide-semiconductor field-effect transistor (MOSFET) [617,618]. When a positive voltage Vg Is applied to the gate, electrons are accumulated in the a-Si H. At small voltages these electrons will be localized in the deep states of the a-Si H. The conduction and valence bands at the SiN.v-a-Si H interface bend down, and the Fermi level shifts upward. Above a certain threshold voltage Vth a constant proportion of the electrons will be mobile, and the conductivity is increased linearly with Vg - Vih. As a result the transistor switches on. and a current flows from source to drain. The source-drain current /so can be expressed as [619]... 

MOSFETs. A type of semiconductor device that utilizes oxide ceramics is a metal-oxide-semiconductor field-effect transistor, abbreviated as MOSFET. Just like the semiconductor junction devices of Section 6.1.1.6, the MOSFET is composed of n-and / -type semiconductor regions within a single device, as illustrated in Figure 6.36. 

Metal oxide semiconductor field-effect transistors (MOSFETs) are field effect transistors with a thin film of silicon dioxide between the gate electrode and the semiconductor. The charge on the silicon dioxide controls the size of the depletion zone in the polype semiconductor. MOSFETs are easier to mass produce and are used in integrated circuits and microprocessors for computers and in amplifiers for cassette players. Traditionally, transistors have been silicon based but a recent development is field-effect transistors based on organic materials. 

MOS metal oxide sensor, MOSFET metal oxide semiconductor field-effect transistor, IR infrared, CP conducting polymer, QMS quartz crystal microbalance, IMS ion mobility spectrometry, BAW bulk acoustic wave, MS mass spectrometry, SAW siuface acoustic wave, REMPI-TOFMS resonance-enhanced multiphoton ionisation time-of-flight mass spectrometry... 

Ion-Selective Field Effect Transistors [22b,c,d] An ion-selective field effect transistor (ISFET) is a hybrid of an ion-selective electrode and a metal-oxide semiconductor field effect transistor (MOSFET), the metal gate of the MOSFET being replaced by or contacted with a thin film of a solid or liquid ion-sensitive material. The ISFET and a reference electrode are immersed in the solution containing ion i, to which the ISFET is sensitive, and electrically connected as in Fig. 5.37. A potential which varies with the activity of ion i, o(i), as in Eq. (5.38), is developed at the ion-sensitive film ... 

Figure 19.8—A selective electrode designed from a MOSFET (metal oxide semiconductor field effect transistor). A specific reaction can be monitored by putting an enzyme in contact with the electrodes. This schematic shows the three electrodes used for amperometric measurement.

---